How possible it is to print drawings using a VBA script. I'm interested in forcing print size and the best fit setting.
Searching for printing/plotting yields more results about saving to dwg/pdf than printing to paper.
Is there a way (either thru Inventor or Vault) of print ALL idw (drawings) files related to an iam (assembly)?
Inventor (and Vault) are capable of creating and managing a BOM of the iam files and would think that it would be reltivly easy to query this bom and "find" all the associated idw files and batch print them. Possibly with the option to select the "levels" to dril down to (All, Top Level, Sub Assemblies within the iam, etc, etc)
When I am printing from AutoCAD LT 2012, I randomly get this error message every 10 to 15 drawings that I print. Considering that I print 10-15 drawings at one time, I am getting a fatal error every time I print a set. Why? I don't get this error when printing in AutoCAD 2011LT or 2012 Full Version.
View 1 Replies View RelatedI wanna print many drawings -beside each other- by one click without repeating plot order, every time I print them it took a lot of time ,I know if them in seperate files it more easier than when they in one file.
View 9 Replies View RelatedIs there is a way to auto rotate drawings in the print window?? I'm always having trouble trying to find out how to rotate the drawings to fit the sheet in a different orientation.
View 7 Replies View RelatedI'm trying to print drawings made in autocad that were modified in illustrator, when I go to print the file ends up stoping halfway through the page. This is infrequent, some times files work and sometimes they don't, aswell often times when files don't print correctly, the title blog will appear at the end of the page.
Specs: Windows 7 64Illustrator CS
Printer:
Xerox Work centre 7556
Is is possible to "que" a bunch of drawings to be plotted? I would like to be able to open a drawing and plot it, then while it's plotting, open another drawing and plot it, then another and so on and so on. However, I get an error message stating that another plot is in process and only one plot or publish process can be active at one time. Thus, I'm forced to wait for the last one to complete before sending the next one to the plotter.
View 4 Replies View RelatedAs part of a study project, I have to describe the steps of assembly of a product (a car within a factory) with a series of drawings.
I've drawn them in the model tab, having each step of the assembly in a separate "tile".
My problem is that when I want to print these drawings in a pdf file, it takes me ages because I have to select and print each drawing separately (plot, select window, print for 40 drawings is very long).
How to be able to print these in a more "automated" process ? I've tried to put them in "layout" but I cannot manage to adjust the drawing to the print zone, on the page (like what you would do when selecting the window before printing with the "adjust to the page" option).
The scaling is not a big deal at this step, as long as all drawings have the same scale (all tiles have the same dimensions).
I am fairly new to AutoCAD. I have a AutoCAD drawing file containing 8 drawings on it. What I would like to do is to print each drawing to a single PDF pages.
View 1 Replies View RelatedI am trying to publish a set of four drawings to a Canon ipf750. I want to make two collated sets. So far I can't get any plot at all.
View 6 Replies View RelatedIs there a way to increase the access time so printing is faster?
I have AutoCAD 2013 and access drawings over VPN (6 meg pipe).
Both opening the drawings and especially printing them take a very long time.
It takes about 8 seconds to open drawings, due to all the modules loading on the bottom-left of AutoCAD. Printing takes even longer than opening the drawings.
Is there a setting I can change to speed-up access time?
I recently joined a firm that has been working drawings up in meters in model space
The issue comes that when i go to input a scale at the viewport stage the drawing is tiny. Ive always worked in mm and thus never had this issue when using the standard 'z' enter 's' enter 1/##xp' to achieve the desired scale
i would like to understand how i can still work these drawings without scaling everything up in model space at a factor of 1000, which is the only way i can think of getting round this issue.
I don't remember ever using this checkbox on the Publish dialog box but today i want to and i can't figure out how to make it work. The help file ~seems~ to say that if i select this, the contents of all open documents (layouts and/or model space) are automatically loaded.... but they don't.
I know i can pick the Add Sheets button and manually select all the drawings i have open but doesn't that defeat the purpose of this checkbox?
When we print from a read-only drawing file that is stored on our local drawing fileserver (a PC on our network that is used to store all finished drawing files) it can take several minutes to open the Plot screen and several more minutes to actually print the drawing. It doesn't matter which printer we use to print to. Some of us have had this problem since AutoCAD 2010 but some have had it only since 2013. However if we use an old AutoCAD 2007 there is no printing delay problem so the server doesn't seem to be the source of the problem.
If we print from a drawing file on our own systems (which is actually working off a local network server unless the server is down then we are working off our own computers that will re-sync with the server when it comes back on line) then there is no delay. I have made some local files read-only to see if that was the trigger but no, they printed just fine.
So I have the educational version of ACAD 2012 and this is my first time using that version. My model is done and I formatted my layout with a border and the model to scale in the viewport. When I go to plot to PDF, all I see is the border. I've tried fiddling with colors and viewports but neither of those did anything.
View 3 Replies View RelatedI'm using ACAD LT 2008.
When i try to copy paste some drawing entities from a heavy drawing file to any other file, the program blocks and says 'not responding', endlessly. So i always have to shutdown the program. I experience the same problem using the designcenter: when I try to copy a layout into another drawing, my computer gets stuck.
Another annoying problem with these files is that they are so heavy, while in fact they shouldn't be. I tried the aectoacad file command. In result the file id half as big, but after I open it and save it, again is the original size.
While making a drawing and there is something which I want to turn visibilty of for a while, I will select from a sub-menu "Visibility" (see the attachment) But what I must do if I want to turn the visibility on again for example to that hole shown in screen shot?
View 2 Replies View RelatedI want to draw operation drawings, I think, ı must do this like that; I must draw one ipt, and later I must draw drawings from this ipt, and idw's
1.drawing (operation); rectangular prism,
2.drawing (operation); rectangular prism and rectangular cutting,
3.drawing (operation); rectangular prism, rectangular cutting and hole,
4.drawing (operation); rectangular prism, rectangular cutting, hole and hexagon cutting,
when I change dimensions of rectangular prism, all four operation drawings must change, so I can't change location of end of part in idw's browser, but I can change location of end of part in ipt's browser, I want to change location of end of part in idw's browser, can I do this? or alternative solution...
I don't want to make, four ipt for each operations... I added a picture...
Autodesk inventor Design Suite Premium 2012
Windows 7 x64, 750 GB harddisk
Intel core i5 Cpu @3.2 GHz, 8 GB Ram,
nVidia Quadro 2000 D Graphics Card
know if we could put for example the Building of our Assembly in some 2D drawings as a "Reference" object and as a non reference object in other 2D drawings?
In some 2D drawings we don't need the whole building, and just with the references is enough, but in some other views, we need to see the building so we can represent the real obstacles we have or to show how the custumer should do the pipe implantation
I am slowly learning about ilogic, and have created parts and assemblies that are run by rules. My next question is, what exactly can ilogic do for drawings? I've looked at the wikihelp, but I am not a natural at programming and I need more than a list of functions with brief descriptions to get me started.
I'm looking for code snippets, other discussions, tips, tricks, and/or tutorials to get info what I can do with ilogic and the API that can automate parts of the drawing process.
The solutions that I have found to get an assembly bom on an assembly drawing are:
1. insert an assembly into an assembly.
2. make a virtual part or derived part.
3. make extra fields in the part and have the BOM column look at alternative iproperty fields.
In a part file that has a family table I want the configurations of some casted parts and some machined parts. the casted parts will have a drawing but no BOM, the machined parts will have a drawing and a BOM.
Then in an assembly file that has a family table I want configurations that use the configurations of the part file. Each of these assemblies will have a drawing that has a BOM that will call out the part that is is made from.
In other words I will have a casting that will be machined so I will need a casting drawing and a machine drawing that has a BOM telling what casting to use.
On top of that when I try to make a family table in an assembly I get a message "THE BILL OF MATERIALS CONTAINS VIEWS OR PROPERTIES NOT SUPPORTED BE CONFIGURATIONS. OONLY STRUCTURED FIRST LEVEL BOM VIEWS ARE SUPPORTED. THE BOM WILL BE CHANGED DURING CONVERSION".
With iAssemblies is it possible to somehow also generate a dwg from it as well? Or would you have to use copy design?
So... depending on the configuration, I would need a main assembly drawing, and a few detail dwgs.
I thought when you created a part and filled out the iproperties description field and created a drawing of that part that the parts list would read the iproperties description field and put that in the parts list description field.
Then when you create an assembly that included that part and filled out the iproperties description field in the assembly and created a drawing of that assembly that the parts list description field would be filled out be the assembly iproperties description field.
Instead the description field of the parts list in the assembly drawing is filled out using the iproperties description field of the part not the assembly.
Every now and then I go back and try to use publish to speed up printing but I always go back to plotting one by one.
I work in a housing construction office and I have 10 separate drawings side by side in model space for house plans that I need plot separate to give to certain people. My problem isn't that I can't publish them separately its that I can't save them over existing pdf's individually predetermined.
Q1. do i just have to go through and change every layout name before or after i publish?
Q2. how do i change the output publish location?
Q3. can each layout be saved to a different existing pdf and remember it?
Q3. can i save these setting across to a new drawing?
I have an assembly that is a general model with different modules that all are iAssemblies.
With this model I can speed up the design process at the company I am working for.
In the model I only choose the correct member for the iAssemblies and the assembly updates correctly and just with a couple of clicks I have made a configuration of all the modules.
Now, I would like to take it a step further and have the drawing, for the specific configuration, generated automatically.
In the drawing I would like to have the master assembly presented in sheet 1 and the modules presented separately in different sheets, all sheets with BOM lists.
Is this possible to do?
(Next step is to export all the BOM lists to an excel document that can be sent to the product co-ordinator to build up the database system)
I have done a new Title Block in our drawing templates.
It only works in New drawings if I open an old drawing I must "Copy/paste" the new Title Block into the browser to the left But I want all our old drawings to use the new Title Block.
Is there a way to have the new Title as default on all old drawings?
What's the best way to ensure that all the drawings for my project are updated if I make changes to the Style settings on one of them? I've been putting every sheet into a single drawing file, but now I'm up to about 50 sheets and it takes about 40 seconds for each save, even if I only made a single minor change since the last save. I don't have any iLogic that could be causing this.
So I'd like to split the sheets up into multiple.dwgs, but I want changes I make my Styles to be reflected in all drawings. Can I create an "external" stye file that all drawings pull their style from? Or will I have to export/import to each drawing every time I make a change?
In Solidworks they had something called custom properties that were generally setup in the models where you had the property names and then values would be filled in to automatically populate drawing titleblocks. I found this, but I can't get the drawing description to keep changes and update the drawing.
View 9 Replies View RelatedI am having some issues concerning updating drawings. When a part (.IPT) is placed in a drawing, everything is fine (ie. the views represented in the drawing are up-to-date). Yet, when I make a change to the part (something as small as a dimensional change) it does not translate through to the drawing. This is also the case for iProperties.
I have been playing around for a while now, but have had no luck. The part is also an iPart, but this shouldn't matter.
In the idw of my assembly hidden detail is turned off although there is still sub assemblies shown through the main container. Also when there is a section these sub assemblies are show with dotted lines an overlap components they are behind.
My questions are
1. Why are they showing through components they are behind.
2. Why are the lines dashed
See attached image.
This is happening on both 2012 and 2014, the workflow was what I followed offline to try and replicate an issue on a live project: Start a new partDraw a rectangle 10m x 10m fully constrainedExtrude by 10mSaveStart a new .dwg format drawing (though same results if using out of the box .idw)Place a top base view of the partSection the part anyway or direction in such a way not to infer any constraintsSection properties set to include slice and slice the whole partPlace the sectionEdit the sketch of the section lineApply a "fix" constraint to the line itselfFinish the sketch I then get an error saying the sketch does not contain a valid section line and the section disappears
he section line sketchRemove the fix constraint from the lineFinish sketch My section then reappears
Edit the section line sketchUse a "fix" constraint on each end of the lineFinish the sketch
My section remains. We're experiencing a lot of problems of section lines and therefore sections disappearing even though we're not directly applying fix constraints, I was wandering if Inventor applies a fix constraint should geometry that a section line is constrained to disappears.