AutoCAD Inventor :: Keep Styles In (sync) Between Drawings?
Aug 5, 2013
What's the best way to ensure that all the drawings for my project are updated if I make changes to the Style settings on one of them? I've been putting every sheet into a single drawing file, but now I'm up to about 50 sheets and it takes about 40 seconds for each save, even if I only made a single minor change since the last save. I don't have any iLogic that could be causing this.
So I'd like to split the sheets up into multiple.dwgs, but I want changes I make my Styles to be reflected in all drawings. Can I create an "external" stye file that all drawings pull their style from? Or will I have to export/import to each drawing every time I make a change?
I have been using 3 common table styles for our drawings and use design center to drag them (from one drawing, where they all reside) into my drawings. I have recently tried this and for some unknown reason they are not coming into my drawing.
I purged everything and still no luck. When I open a new, blank drawing and try it, it works fine. Not sure what could be preventing this command from working in the drawing I'm trying to get these tables into.
I open two different drawings, I'll call X and Y. I make X current. Using the setting tabs of the prospector I go to Y drawing and click the plus and open the styles i want to insert into X drawing. So for example I open <General <Label Styles <Note Elevation and drag that style into my X drawing. I go and look at my X drawing <General <Label Styles <Note and see that Elevation is not there.
I have tried using AeccImportStylesAndSettings and also I'm running the sincpac which has an import civil styles function that does not work either. I went to a co-workers machine and he can get the styles import function to work just fine.
why I may not be able to get this to work? I even tried to create a new layout from template and still could not get beyond the styles that are default to my current drawing. My only option is to create the styles manually and that is, well, not an option.
Using Civil 3d 2011, I am trying to drag and drop styles from a template drawing to my working drawing. I drag the style into my working drawing and it acts like it is dropping it in my drawing put it never does show up in toolspace.
How do update the styles library to keep from getting the Styles Conflict error box. I have used the Standard.dwg file that loaded with Inventor 2012 but everytime I change styles and save the changes in a new template in reverts back to the library definitions.
I used to be able to select 'NO' in the LIbrary option of the Projects Folder but that optiion no longer exists.
We've created a new parts list style for a border.When the border tempalt file is on the c: drive...everything works hunky dory...parts list, revision tables, etc.But as soon as we copy and paste that border into the template library folder for new drgs...the parts list style is missing from the local styles?
So to make it appear on the new document...the style manager has to be set at all styles and the new parts list style has to be saved to the document?What aren't we doing to make it appear on the template?
Also note that because the drawing border template is in a template folder as part of the design projects...it is NOT editable...so it has to be edited outside the template folder.
I am using Lightroom 4.4 on a 2013 Macbook Air OS 10.8.4.
I cannot see the Switch enables auto sync on the Metadata sync button. Its currently visible on another machine a MacPro with Lightroom v4.3. I find this useful to be bale quickly enable and disable the syncing of metadata. Has this been dropped in v4.4 or have I missed a prefs setting somewhere?
i would like to be able to make a change in iProperties ( part #, description, stock number), and then automate/sync that change to the .idw of that part/project after the .idw is created.
is this possible? do i just need to fill out the iProperties BEFORE i make the .idw,
I really hope this is possible, we are going back and reorganizing all of our previous work and putting everything in vault now.
I use a desktop at work and typically my (work) laptop at home. Problem I have been getting is when I have content like bearings or similar and I sync my Laptop to my desktop Inventor loses these kind of things.
I am using a seperate program to syncronize my two computers that is very effective but I am thinking I dont have it point to where inventor keeps this content and as such it loses it in transfer. Bad thing is that I lose constraints when things like my bearings dissapear and its a real pain.
How I can correct this so I wont be losing such things in a sync?
I'm trying to unskillfully crash my way through writing a VBA program for modifying Inventor drawing border info, and have managed through cannibalizing other programs to achieve 95% of what I wanted (ie the iproperties part).
Prompted Entries via VBA..I'd like to create a sync 'Prompted Entries' from sheet 1, across all sheets button.
The 4 prompted entry fields are always..I'd love some VBA code that could read the above 4 Prompted Entry values from Sheet:1 and then sync these values across multiple drawing sheets within one .idw file if more than one sheet was present.
I am wondering if there is a way that you can use the geometry from Architecture in Inventor other than just a visual concept. I am trying to create buildings in Architecture then import them into Inventor. I have tried the "Sync Inventor" command but there is no usable geometry when it is imported into Inventor. I have used Navisworks to show the building layouts but I am needing to be able to take measurements and possibly constrain to walls or other solid objects.
I've just used the Sync Center in Windows for the first time. Basically I syncronised an Inventor project that resides on a server with my laptop so I could go into the field. All seemed to work well until I returned back to the office and performed the sync again. For some reason now all of my projects don't appear in the projects list.
Sync Center and Inventor. Should I be looking at Vault. Can it do syncronising better than the Sync Center shipped with Windows?
Product Design Suite Inventor Premium 2012 - SP1 Installed HP 8760w I7-740M Laptop Windows 7 Professional 64 12 Gb DDR SDRAM AMD FirePro M5950 Graphics Card
How do you apply certain contour label styles to certain surface styles (i.e. When I have an existing surface i want the default contour labels to be an "existing contour" style). Right now the default is a "finished contour" label style for all surfaces.
I created special dimension styles in Inventor 2013 in a drawing and trying to get them into another Inventor drawing. Can this be done like in Autocad by coping to the clip board and pasting into the new drawing?
Is there a way to assign different dimension styles to different sheets in an idw. I have idw drawings with several sheets and use a couple of different dimension styles depending on what is on each sheet. I've created the dimension styles I want to use but I don't know how to assign a dimension style to a specific sheet. For now what I am doing is dimensioning, then as needed for the dimensions that need a different style, right click on the dimension and select new dimension style to changes its dimension style. I would like to assign dimension styles to specific sheets, is there a way to do this? Even though borders, title blocks, etc. are the same throughout the sheets, do I need to create different sheet formats to do this?
It is possible to change a document style color with a VBA macro or why not with iLogic ?.
I regularly imports STEP and the parts have defined colors. Unfortunately for change must clear all colors of surfaces. By cons, if you edit the styles we see that for each color there is a style with the color name.
So basically if I change a color style, all parts using this style will change.
I needed to create new dimensioning styles - that I can do. However, there doesn't seem to be a way to apply them to a current drawing. In the Annotation section under Format there are no "styles" listed - not even the default.
So, how is one able to populate the list so one may choose a specific style or another? Or, is there somewhere else I should be looking?
In creating our drawing template, I collected alot of unwanted styles and want to delete/clean this up. I only want to keep what's highlighted..By the way, I found style editor and template creation quite tedious & convoluted.
Dell T3500 Intel Xenon CPU 15 MB RAM 64-bit operating system NVIDIA Quadro 5000
I've created a self-draining tube and pipe style for the first time. I find that in some routes only the self-draining style is available and in other routes it isn't available (i.e. in the drop down list or to activate in the styles dialog). What the rules are that allow non- or self-draining style selection?
So I have migrated my template. Now when I start a new assembly, I get the "Styles Conflict" message. I could suppress it, but I'd rather not.I had rather that the file use the style definition in the style library. So I have to update the template with the new style definintion. Question is how to do that now in 2013?
I opened the template, then went to the Material Browser. In the righ hand pane, I picked the "Generic" material and then the up arrow (add material to document). I get a message that it already exists and the local copy will be used.
How do I get it to overwrite the local copy and use the styles definition in my library?
Styles in Inventor have always been confusing to me. I have ONE project file, ONE teplates folder, but TWO different drawing templates (one for single part drawings, one for assembly drawings). For simplicity sake, lets say the ONLY difference I want between the two drawing templates is the parts list. The assembly template parts list should have lets say one more column than the other.
I did what I thought should do it but it isn't working properly. What's the best way to accomplish this? Right now within the same style library I have two parts lists set up, and I have two "standards". The only difference between the two standards is which parts list box is checked on "available styles". When I change "object defaults" to onw parts list or the other, it changes that default for all drawing templates, not just the one I'm using.
When I try and migrate an old Inventor 2011 material library to Inventor 2013 using the migrate tool from the material browser I keep getting this error:
Migrate Legacy Color/Material Library: problems encountered while executing this command.
One or more color/material names were changed during the migration process.
I am in the middle of an upgrade from 2009 to 2012 and have a styles use question. I am running three flavors of Inventor: Inventor, Inventor Professional, Inventor Factory (based on Pro). The styles library that I am starting with was migrated from 2009 to 2012 and was running both IV series and Pro Seats. Although no real Pro functionality was ever used so any associated styles were still as delivered for the most part. My working environment is a single Vault project setup where all the styles and libraries are local copies on each workstations drive. All the standard content (styles and libraries) stay checked out to myself on my machine for protection.
So here is what I did to make an all inclusive styles library that all flavors of products will use. pick this apart if you see something wrong with the method.
1) I started with the migrated styles library from 2009
2) As I installed the different flavors I copied the new styles libraries over the existing migrated one without allowing it to "overwrite" any existing styles files. This only populated the styles libraries with any thing I was missing from any of the flavors.
3) I use this combined library on all station regardless of the flavor installed. So some stations have styles on them that are not in use by the installed software.
I am after a way of accessing the update styles on dwg so that I can run with rule below as most of our drawing stds have changed and old dwgs need updating the work flow is as follows.
I need to access manage tab then update styles,then yes to all,OKUpdate all sheetsfind all parts list within all sheet and then annotate , style on format tab and then select Parts list - this will change all my old parts list to current style definition.Either run at begining of code below or run as seperate code
On Error Resume NextDim oDrawDoc As DrawingDocument oDrawDoc = ThisApplication.ActiveDocumentDim Sheet As Inventor.SheetDim Cursheet As String Cursheet = oDrawDoc.ActiveSheet.Name For Each oSheet In oDrawDoc.Sheets oSheet.ActivateDim oPartsList As PartsList oPartsList = oDrawDoc.ActiveSheet.PartsLists.Item(1)If Not oPartsList Is Nothing Then Resume Next'Call oPartsList.Sort("ITEM")Call oPartsList.Sort("PART NUMBER", 1, "DESCRIPTION", 1, "QTY", 1)iLogicVb.UpdateWhenDone = TrueActiveSheet = ThisDrawing.Sheet("Sheet:1")ThisApplication.ActiveView.FitEnd If Next
When I make changes through styles editor and try to save them, I get a window that pops up saying "Style library (C:Vault_WorkDesign Data) cannot be saved because it is damaged".
I have some styles I will like to replace in some drawings but how? I cant find any function to do this.
Dim oIDWStyles As Inventor.DrawingStylesManager Set oIDWStyles = oDrawDoc.StylesManager Dim oldstyle As style Dim Newstyle As style For Each oldstyle In oIDWStyles.Styles If oldstyle.Name = "Old style" Then
I have not seen this issue happen in quite a while. I saw it on earlier releases pre-2013. But now after the Update2 build it seems my IDW's are not behaving properly.
Scenario:
1. Create model of a raw material (steel) stamped bracket. It receives its own part number
2. Create iam using the unpainted bracket and then assign a color (red) to represent a painted finish. This receives a new part number due to our MFG process.
3. Create iam model using other "painted" sub assembly models (step 2 for instance). New part number.
4. Create IDW but it shows the raw material (step 1) rather than the painted model. It should show the painted
I make an idw template at home and at work i get this message that says style library will override the listed styles, and enables me to choose if i want to impose the style library or the styles in the template.
I want to impose the styles in the template and the message says that in order to achieve that i have to delete the styles.
Which styles to delete and how?
When i use the purge styles command it's empty.
I understand that duplicate names of styles make the problem, but at home i checked 2 of the styles and found them the same as at work, but maybe i don't remember all the changes.
Is the solution simply to make new styles with new names?
