When I try and migrate an old Inventor 2011 material library to Inventor 2013 using the migrate tool from the material browser I keep getting this error:
Migrate Legacy Color/Material Library: problems encountered while executing this command.
One or more color/material names were changed during the migration process.
We have just migrated from Inventor 2009 to Inventor 2013 - I was thinking to migrate the old IV 2009 materials and colors to a new library. The migration dialog box in IV 2013 requires XML files while the export from IV 2009 generates STYXML files.
View 2 Replies View RelatedIs there any way to upgrade an entire 2013 *.adsklib to 2014 version? Information given at URL.....would seem to indicate the process is seamless...
When I navigate to the 2013 Design Data as indicated by the Material Style Migration dialog, the upper section is greyed out as shown. No Colors.xml or Materials.xml files exist. This displays whether I choose to create a new library or select an existing one (I get the feeling that this tool applies only to pre-2013 migration).
I am unable to proceed to the next step of migrating custom content center libraries, since many of the content items depend upon the custom materials/appearances definitions.
I've made some customisation in the ribbon of a 2013LT version.
Now some customisation functions are only available on the Full, so I download and install it but I can't find a way to import all those custom settings grom LT to Full...
Seems it works only from LT to LT or Full to Full..
So I have migrated my template. Now when I start a new assembly, I get the "Styles Conflict" message. I could suppress it, but I'd rather not.I had rather that the file use the style definition in the style library. So I have to update the template with the new style definintion. Question is how to do that now in 2013?
I opened the template, then went to the Material Browser. In the righ hand pane, I picked the "Generic" material and then the up arrow (add material to document). I get a message that it already exists and the local copy will be used.
How do I get it to overwrite the local copy and use the styles definition in my library?
I'm trying to migrate our styles library from Inventor 2011 to 2013 using the style library manager. I have the current (2013) library loaded in the first slot, and my old 2011 library loaded in the second slot. Under the 2011 library, the Migrate button is active.
I click Migrate, and after telling me it can take up to 2 minutes to migrate the library, it proceeds. After about two minutes, I get a progress box generated by Inventor (not the style library manager) that indicates it is copying some 1300 files from one location, to another. I can't tell if it is the same location or not, as the filepaths are truncated in the progress box.
As it finishes, usually with one file remaining, I get the "Autodesk Inventor 2013 Has stopped working" error. A problem caused the program to stop working correctly etc. etc.
I do not relish having to go back and manually define all my styles.
Context: Product Design Suite Ultimate 2013, Win 7 Pro, 12 GB ram. I've tried both with and without my antivirus realtime scan on.
in versions of inventor prior to 2013 we were able to quickly and easily refresh a part styles, and thereby obtain the master information for materials, colours and any other style.
i find that now, with the new system of managing materials and appearances that if i need to update a part to reflect the material assests that reside in my materials and appearance library that i have to:
1. open the part, then set the part material to a material other than that i wish to update, then
2. delete the local/ document asset of the material i wish to update, then,
3. assign the material from my material library to the part (to get the library assets to come through to the part).
it seems ridiculous that we have to delete local materials or colours prior to obtaining an updated material or appearance to get the new data into the part.
(the refresh styles command actually appears to be calling in the updates however the updates seem to treat the document assets as the most important. even when managing materials and appearances, the local/document asset seems to take priority over any library asset. again this is different to pre 2013, and is frustratingly slow to work around. all that used to happen in 2012 and prior is we would get a warning that the local style would be overwritten with updated style data = very quick and easy
I've installed R2014 Suite, but I’m unable to Migrate Settings from the Start Menu after rebooting.I have both R2012 and R2013 installed on this computer. The Migrate Setting Tool doesn’t think I have a previous release installed – Error Message3.Then when I open R2013 (not R2014) and try it, I get Error Message4.
View 3 Replies View RelatedHow do update the styles library to keep from getting the Styles Conflict error box. I have used the Standard.dwg file that loaded with Inventor 2012 but everytime I change styles and save the changes in a new template in reverts back to the library definitions.
I used to be able to select 'NO' in the LIbrary option of the Projects Folder but that optiion no longer exists.
We've created a new parts list style for a border.When the border tempalt file is on the c: drive...everything works hunky dory...parts list, revision tables, etc.But as soon as we copy and paste that border into the template library folder for new drgs...the parts list style is missing from the local styles?
So to make it appear on the new document...the style manager has to be set at all styles and the new parts list style has to be saved to the document?What aren't we doing to make it appear on the template?
Also note that because the drawing border template is in a template folder as part of the design projects...it is NOT editable...so it has to be edited outside the template folder.
I need to migrate 5000+ SW drawings files. Some have broken model references. I was hoping to use task scheduler but it produces empty DWG for any SW drawing that has a broken reference.
Now there is a feature in SW called QuickView that opens in the last saved state but doing so only allows to save to TIF.
I'm having a problem migrating a custom idw 2011 template to 2012. When I try to open the template I get the message that I need to open and then explicitly save, but I cannot open the file. I've checked the file locations in options and in the projects, and all is correct.
View 2 Replies View RelatedWe are trying to migrate our 2010 and earlier inventor files that exists in our vault 2012 professional fully replicated environment to The latest inventor release.
We are trying to utilize the task scheduler. but when attempting to use the "Migrate Files from Vault" and select the option to add folders. we receive several pop ups, one after another. The header states "folder" and in the message box is simply "1000" then an "ok" button.
After clicking ok a half dozen times the dialog finally comes up to select the folder, but the entire vault is not available in the selection window. I have tried this on several machines and 2 different databases. Same result.
I need to migrate approx 80 idw files along with the models referenced by these idw files from Inventor 2013 to Inventor 2014. I need to do this mainly because I need to update the title blocks in the idw files and the idw files need to be at 2014 level for the 2014 version of the Drawing Resource Transfer Wizard to function. Is there a method to batch migrate the idw files to Inventor 2014 level or do I have open and save them one at a time?
View 1 Replies View RelatedWhat is the risk Migrating Inventor 2009 files to Inventor 2012?
Do i have to migrate the Inventor 2009 files to 2010 and up to 2012?
I am trying to use Task Scheduler to migrate all my .ipt files from 2010 to 2011. When I do it however it gives me the error , "cannot create Task" in a little pop up message box. It does this will types of task , i.e. I can not create any tasks ever.
View 2 Replies View Relatedwhat is the benefit of using Task Scheduler to migrate all of my Inventor files to the latest versions?
I've upgraded several times, but I've never done a full file migration.
I have many old documents.Created with shared project. I want to migrate to Inventor 2012 vault or single project. But after the migration files are not available. I do not want to be associated with users.
View 6 Replies View RelatedEvery time when I upgrate Inventor to new version, my old assembly drawing will loss the content center file. So I have to replace the old version's content center file from the new version's content center file. How to automatically migrate it?
View 5 Replies View RelatedAutocad 2014
One of our company standard template has preloaded dim styles.
I wish to change all of them so that the text is closer to the baseline.
How do I amend all of them in one go.
I always imagined they were all based on the standard one and if I changed the standard they would all reflect these changes.
The first picture shows an old drawing using Autocad LT 2005 plotstyles named "cannon.ctb"*notice the weight of the dimension lines
The second picture is my new drawing using those same plot styles in our new Autocad LT 2013. Almost nothing is visible and it will not copy it is so light. The third picture is my new drawing and clicking on the box that says "Plot with Plot Styles" AND "Plot object lineweights". Note: I do not have my drawings set up with object lineweights.
I have tried completely redoing my plot styles, but that does not work. I am at a complete loss as to how to get my plot styles to register in this Autocad version 2013.
We have just upgraded our computers and now have windows 7, along with upgrading Autocad LT 2005 to Autocad LT 2013, and I have just installed a new Cannon plotter. However, I was having the same issue prior to the new plotter and I was hoping the plotter was the problem, which it seems to not be.
I've been using Autocad for over 20 years. Any office I've ever worked in never used custom plot styles.
Can custom plot styles control lineweights of objects at different scales? For example, I have a floor plan drawn for 1/4" plotting the lineweights look fine. Now I want to print that floor plan at 1/8" but many lines now look darker than before. Can I create a plotstyle for the 1/8" scale to control the lineweights?
How to reuse table styles? I have tried design center but when I bring in the table style it changes the sizes. I have also tried to create a block, but when I explode it to modify the table cells it will change the sizes still.
View 3 Replies View RelatedHow do I change the text style for one layer only? I already have some text in one font on a layer but now I want to create lables in a different font but when I change the text style while that layer is active both layers change.
View 6 Replies View Relatedwe have tables as a standard in the office, each table is of the same table style on the same layer.all properties for all table borders are set to Bylayer (G-ANNO-TEXT color70).
the issue is- in AutoCAD 2014 open a template dwg with the Layer G-ANNO-TEXT in the template place the table on the current layer it does not adopt the properties of any other layer until you go into tablestyles and modify the settings for all borders
I have a drawing that has hundreds of text styles that do not seem to be used by anything that I cannot purge. I have even deleted everything in the entire drawing, and it still says that the text styles are in use. Is there a way to override the purge since I know that the text is not in use.
View 9 Replies View RelatedWhy the following options are disabled in the block editor.
3drotate
new ucs
visual styles
Where I can find a improved block editor plug-in.
i had been using autocad for almost 10 years now and i always have the newer version for my line of work.
i am having trouble with the excessive styles that shows whenever i copy and paste then the problems occur after that most often. copy paste problems, fatal errors, and my computer hangs most of the time.
I received a drawing today that doesn't allow me to choose existing ".ctb" files. Opening the "Plot style table (pen assignments)" from the Page Setup dialogue box. I can choose "Start from scratch" , use a "CFG" file, or "Use a PCP or PC2" file". I do not have any CFG files. I usually use PCP in my "Plot" dialogue box for the plotter pull-down menu.
How to use my plot style "BRhalf.ctb" when plotting this drawing. Also, a "heads-up" on background information on this drawing's plot style options, vs. the plot style options on many other drawings I have plotted.
How do you apply certain contour label styles to certain surface styles (i.e. When I have an existing surface i want the default contour labels to be an "existing contour" style). Right now the default is a "finished contour" label style for all surfaces.
View 4 Replies View RelatedI created special dimension styles in Inventor 2013 in a drawing and trying to get them into another Inventor drawing. Can this be done like in Autocad by coping to the clip board and pasting into the new drawing?
View 2 Replies View Related