I have a drawing that has hundreds of text styles that do not seem to be used by anything that I cannot purge. I have even deleted everything in the entire drawing, and it still says that the text styles are in use. Is there a way to override the purge since I know that the text is not in use.
View 9 RepliesI was looking a lot after a simple tool, to can remove or purge unsed textstyles.
View 1 Replies View RelatedI had a user ask why some dimension styles cannot be purged even if all the dimensions are deleted from the project.
Most probably the dimension style is used in a family that is loaded in the project.
When you select all dimension instances in the entire project, it will not select those included in the families. But the purge function will 'see' that it is still used in a family and therefore it will not be listed in the purge dialog.
So you will have to find in which family the dimension style is used.
I don't think there is an easy way to do it. I would make a copy of the project and then delete a bunch of families until the dimension style can be purged, then refine the research until to find the family that contains the dimension style.
We have a problem in our office. In some of our drawings we keep getting a lot of unwanted linetypes and text styles. Nobody is sure where they originated.
We have tried this method in getting rid of them but it doesnt work. [URL]
See attached file.
Same applies with the text styles.
When I purge a drawing, the text styles are not a selectable option (as if there are no purgeable text styles). if i use (-purge), it will purge the unused text styles. I can also go into the Styles dialog box and delete the styles. It happens in all drawings and nobody else in the dept has the problem. I can't find any settings that would exclude any items from the purge dialog box as well. Autocad 2012? windows 7 64 bit.
View 1 Replies View RelatedWhen I open a new template all the correct linetypes are there and the drawing works fine, I can purge and they are deleted if not in use.
When I copy ANYTHING from one of my existing drawings which contains all these odd linetypes then they all appear in the new drawings and they will not purge.
ANYTHING = Text, blocks, lines... etc.
From reading about similar problems I think it has risesn from Binding/Inserting (I cant remember which one I used) of a Xref orignially from Microstation into a drawing I did about 3 months ago. The linetypes have just stuck around.
I have a large xref from a client that is causing me some grief. When I open it, I get a message about it having over 5,000 annotative scales (seriously!). What do I need to do to get rid of them? I'm not a big fan of xref's & things like this make me like them even less!
View 9 Replies View RelatedSearching on the title there are 8 queries responding to same problem ... The latest in 2010.
They still don't purge!!???
How to purge or delete all unused bitmaps, that collected in bitmap gallery, that no longer is needed, except those, in my page?
View 2 Replies View RelatedI've been archiving then deleting projects out of Smoke. However, my media hard drive is not gaining available space.
Is there a safe way to purge any unused media?
I received a file (exported from datacad) with apx. ~1000 dimension styles. I selected all dimensions and changed their style to a new style. Now I want to delete the old styles, but Autocad says they are used. I tried purging, but it doesn't work.
View 8 Replies View RelatedIs ther a way to purge all civil 3d styles in a macro or lsp. -purgestyles does not seems to work. I have not worked with lsp for a while just getting back into it again.
I have seen this used for purge (vla-purgeall File) and (vla-AuditInfo File T) for audit can we somethging like this with purgestyles or some how echo off the dialog that comes up. seemslike purgng styles should be just as simple a an audit or purge, but is seem more complex.
How do I change the text style for one layer only? I already have some text in one font on a layer but now I want to create lables in a different font but when I change the text style while that layer is active both layers change.
View 6 Replies View Relatedi had been using autocad for almost 10 years now and i always have the newer version for my line of work.
i am having trouble with the excessive styles that shows whenever i copy and paste then the problems occur after that most often. copy paste problems, fatal errors, and my computer hangs most of the time.
I'm trying to delete a unused layer. But when I do that I get the following error (see attachment). I googled a bit and figured out that the LAYDEL command might solve my issue, but as I'm using Autocad 2013, that's not possible, as it doesn't have this command...
The block that causes the error can also be deleted, I tried with the purge command, but must be doing something wrong cause it didn't work. Oh yeah, with regard to the purge command, I see it this way (attachment 2), how can you display it in a window kind of view to get a better overview?
We've having an office wide problem of drawings getting bogged down with, in some cases, hundreds of linetypes. Not sure where the source of the problem is coming from but as we contiunally use the drawings they keep gaining more and more linetypes, like a snowball rolling down a hill, and the files become so large they are almost unusable. The linetypes don't purge out of the drawing and are not connected to anything. I've tried everything I can think of to clear out the linetypes and the only thing that seems to work is wblocking them. Which when we're talking about hundreds of projects consisting of hundreds of files is a lot of work. We do wblock the drawings in a project on occasion to keep the files usable but they just become infected again eventually.
What might work to clean them up on a batch basis? I've attached a file that's infected so you can take a look. This is a file that has never had anything xref'd into it and was created as a brand new file when originally created. At some point over the last 3 weeks it got infected with the linetype disease.
I am trying to purge a layer on a drawing that the company is going to use as a template, but even that the layer is not the current one and without objects I cannot purge-delete the layer.
View 1 Replies View RelatedI'm having a small problem with linetypes that are not being used nor will they purge from a drawing. I believe that all started with the binding of an xref but now the xref has been removed along with just about everything else other than simple geometry and some text. The linetypes will not purge. For instance, if I take a standard "new" dwt file that has no problems and copy anything from an "infected" drawing to the dwt, the infectious linetypes will now appear in the dwt. And when I say anything, I mean anything. i can draw a new circle/line/point on the "0" layer and copy that new item into the clean dwt and it will take along with it the unwanted linetypes.
I have seen a similar post about linetypes not purging. And have tried the wblock solution with now luck. I have tried recover along with anything else that I could think of. Again the drawing doesn't have any xrefs and even newly drawn items, when copied, will become infected by the unwanted line types.
Also, the linetypes that are being left behind do have the "$0$" within the name. But also to mention the only ones being left behind are "powerline" and "phantom",
I can not run purge or recover on the attached drawing file or it will crash autocad. When I run audit it says no errors are found. I don't have access to older versions of ACAD to test this on and the file is dated back in 2008 but not sure which version of ACAD it was created in.
This is the only copy of the file. I've opened it and added some linework and saved it as a newer drawing only to have the same results. The attached file is the unaltered version. I have one other file that I'm having the same issue with as well.
I often use "purge" for current directory drawings. Any lisp or ObjectDBX to perform batch purge? even i do not need to open the drawings.
View 1 Replies View RelatedAutocad 2014
One of our company standard template has preloaded dim styles.
I wish to change all of them so that the text is closer to the baseline.
How do I amend all of them in one go.
I always imagined they were all based on the standard one and if I changed the standard they would all reflect these changes.
The first picture shows an old drawing using Autocad LT 2005 plotstyles named "cannon.ctb"*notice the weight of the dimension lines
The second picture is my new drawing using those same plot styles in our new Autocad LT 2013. Almost nothing is visible and it will not copy it is so light. The third picture is my new drawing and clicking on the box that says "Plot with Plot Styles" AND "Plot object lineweights". Note: I do not have my drawings set up with object lineweights.
I have tried completely redoing my plot styles, but that does not work. I am at a complete loss as to how to get my plot styles to register in this Autocad version 2013.
We have just upgraded our computers and now have windows 7, along with upgrading Autocad LT 2005 to Autocad LT 2013, and I have just installed a new Cannon plotter. However, I was having the same issue prior to the new plotter and I was hoping the plotter was the problem, which it seems to not be.
I've been using Autocad for over 20 years. Any office I've ever worked in never used custom plot styles.
Can custom plot styles control lineweights of objects at different scales? For example, I have a floor plan drawn for 1/4" plotting the lineweights look fine. Now I want to print that floor plan at 1/8" but many lines now look darker than before. Can I create a plotstyle for the 1/8" scale to control the lineweights?
How to reuse table styles? I have tried design center but when I bring in the table style it changes the sizes. I have also tried to create a block, but when I explode it to modify the table cells it will change the sizes still.
View 3 Replies View RelatedSo I have migrated my template. Now when I start a new assembly, I get the "Styles Conflict" message. I could suppress it, but I'd rather not.I had rather that the file use the style definition in the style library. So I have to update the template with the new style definintion. Question is how to do that now in 2013?
I opened the template, then went to the Material Browser. In the righ hand pane, I picked the "Generic" material and then the up arrow (add material to document). I get a message that it already exists and the local copy will be used.
How do I get it to overwrite the local copy and use the styles definition in my library?
When I try and migrate an old Inventor 2011 material library to Inventor 2013 using the migrate tool from the material browser I keep getting this error:
Migrate Legacy Color/Material Library: problems encountered while executing this command.
One or more color/material names were changed during the migration process.
we have tables as a standard in the office, each table is of the same table style on the same layer.all properties for all table borders are set to Bylayer (G-ANNO-TEXT color70).
the issue is- in AutoCAD 2014 open a template dwg with the Layer G-ANNO-TEXT in the template place the table on the current layer it does not adopt the properties of any other layer until you go into tablestyles and modify the settings for all borders
Why the following options are disabled in the block editor.
3drotate
new ucs
visual styles
Where I can find a improved block editor plug-in.
I'm trying to migrate our styles library from Inventor 2011 to 2013 using the style library manager. I have the current (2013) library loaded in the first slot, and my old 2011 library loaded in the second slot. Under the 2011 library, the Migrate button is active.
I click Migrate, and after telling me it can take up to 2 minutes to migrate the library, it proceeds. After about two minutes, I get a progress box generated by Inventor (not the style library manager) that indicates it is copying some 1300 files from one location, to another. I can't tell if it is the same location or not, as the filepaths are truncated in the progress box.
As it finishes, usually with one file remaining, I get the "Autodesk Inventor 2013 Has stopped working" error. A problem caused the program to stop working correctly etc. etc.
I do not relish having to go back and manually define all my styles.
Context: Product Design Suite Ultimate 2013, Win 7 Pro, 12 GB ram. I've tried both with and without my antivirus realtime scan on.
I received a drawing today that doesn't allow me to choose existing ".ctb" files. Opening the "Plot style table (pen assignments)" from the Page Setup dialogue box. I can choose "Start from scratch" , use a "CFG" file, or "Use a PCP or PC2" file". I do not have any CFG files. I usually use PCP in my "Plot" dialogue box for the plotter pull-down menu.
How to use my plot style "BRhalf.ctb" when plotting this drawing. Also, a "heads-up" on background information on this drawing's plot style options, vs. the plot style options on many other drawings I have plotted.
in versions of inventor prior to 2013 we were able to quickly and easily refresh a part styles, and thereby obtain the master information for materials, colours and any other style.
i find that now, with the new system of managing materials and appearances that if i need to update a part to reflect the material assests that reside in my materials and appearance library that i have to:
1. open the part, then set the part material to a material other than that i wish to update, then
2. delete the local/ document asset of the material i wish to update, then,
3. assign the material from my material library to the part (to get the library assets to come through to the part).
it seems ridiculous that we have to delete local materials or colours prior to obtaining an updated material or appearance to get the new data into the part.
(the refresh styles command actually appears to be calling in the updates however the updates seem to treat the document assets as the most important. even when managing materials and appearances, the local/document asset seems to take priority over any library asset. again this is different to pre 2013, and is frustratingly slow to work around. all that used to happen in 2012 and prior is we would get a warning that the local style would be overwritten with updated style data = very quick and easy