i had been using autocad for almost 10 years now and i always have the newer version for my line of work.
i am having trouble with the excessive styles that shows whenever i copy and paste then the problems occur after that most often. copy paste problems, fatal errors, and my computer hangs most of the time.
Every time I purge my drawing several plot styles show to be deleted. I don't reconize them, one I see offten is called Invisible ink. I started to try to use it to see what its about. I can't seem to find the right track and use this plot style.
View 2 Replies View RelatedHow do I change the text style for one layer only? I already have some text in one font on a layer but now I want to create lables in a different font but when I change the text style while that layer is active both layers change.
View 6 Replies View RelatedI have a drawing that has hundreds of text styles that do not seem to be used by anything that I cannot purge. I have even deleted everything in the entire drawing, and it still says that the text styles are in use. Is there a way to override the purge since I know that the text is not in use.
View 9 Replies View RelatedI'm trying to set the plot styles to use specific linetypes for given colors. The theory is that using adaptive linetypes, then lines that are color 50 for example will always display dashed regardless of the length. This seems to work great, except that I'm not happy with the linetype scale (dashes plot too long). Obviously changing linetypescale does not work because adaptive is turned on. So the only solution I could think of was to change the actual linetype definition, but the acad.lin file does not seem to be related to the linetypes shown in the CTB editor (or is it?). How to change the linetype definitions that are linked to the ctb style?
View 8 Replies View RelatedHow can I copy a linetype definition from a drawing to the linetype definition file?
View 7 Replies View RelatedUsing: Land Desktop Companion 2009
Issue: Imbeded text in Linetype is automatically orienting the top of the text toward the center of the arc. I have tried to "reverse polyline" to fix this, but the text will not change. Is there a line property that I am missing that will allow the text to orient itself as readable from arc Point of begining to the end?
i use Autodesk Autocad 2014 , version 18 I have the following problem I open one drawing and start my work Then i open another one and the first one gets delleted , the sheet remaining empty.
View 9 Replies View RelatedI am autocad 2010 user. I have drawing files from consultants with custom linetypes. I have deleted the. shx file but need to change line type. How do I select the relevant lines to convert to normal line type?
View 2 Replies View RelatedI am currently running AutoCAD 2013 LT on a Windows 7 64 bit system. I was recently running this same software on a 32 bit system computer and everything was running properly. After the upgrade, I have noticed a linetype issue that I cannot seem to get a handle on.
We use a "insul" linetype on building sections that should come out looking like an architectural insulation pattern. After upgrading to the new computer, this linetype only reads as dots, nothing else. I have gone to other comnputers in the office that are displaying this linetype properly and have copied their acadlt.lin as well as acadltiso.lin files over to my computer and it has not solved the problem.
Below are linetypes that we created for our use. We have tried to create others but we dont know what the parameters are
Height of text, spacing of line between text, center of text...
*RS-485,RS-485 ----485----485----485----485----485----485--
A,.5,-.2,["485",STANDARD,S=.2,R=1.0,X=-0.1,Y=-.1],-.6
*RS-422,RS-422 ----422----422----422----422----422----422--
A,.5,-.2,["422",STANDARD,S=.2,R=1.0,X=-0.1,Y=-.1],-.6
*RS-232,RS-232 ----232----232----232----232----232----232--
[Code] .......
Is there a way to start a custom line type so that is starts and ends with "O". Right now, the default "FENCELINE1" has circles in it, but it starts and ends with a line.
Here's their code for the line:
*FENCELINE1,Fenceline circle ----0-----0----0-----0----0-----0--
A,.25,-.1,[CIRC1,ltypeshp.shx,x=-.1,s=.1],-.1,1
I already tried just putting the O's at the ends, and that didn't do it.
Below is a picture of what I'm looking to get. The top one is the FENCELINE1, the bottom one is just circles and lines, but that's how I want the linetype to look when they place it... so first click would have a circle, second click would have a circle, and the circles "in" the line would spread out evenly.
Just so you know... this is for guardrail inside a where house where it has the circle pillars on each end with circular pillars in the middle (every 8', but the spacing isn't crucial).
I have a very particular client insisting I recreate a specific lineteype. The previous technician used AutoCAD Architecture 2012 to create a shape within the linetype. I have recreated the shape, with my AutoCAD 2014, but am struggling with creating the linetype 100%, and getting into other files.
View 9 Replies View Relatedrather than each time i change layers having to fix layer and linetype to each other how do i more permenatly fix the two together?
View 1 Replies View RelatedI have a layer named XYZ, that contains ARC, LINE and POLYLINE. I want to get a list of all linetypes from every ARC, LINE and PLINE. If I open the properties, if I select only the ARC, under linetype I'm getting *Varies*. Instead of*varies*, I would like to have a list of all linetypes (ARC, LINE and PLINE).
Is it possible? WOuld it also be possible to do the same for linescale or weight?
Having an issue with linetypes that are proprogating within all our drawings in our office... I have tried to purge, delete all and wblock and nothing seems to work. The only thing that I found to work is superpurge...
Junk is the drawing that I erased everything. (junk drawing is 2.6M with nothing in it...) click on this link to download... [URL]........
I wblocked out wblock drawing and the size fell but the file still has all the linetype...
If I draw something in wblock and copy clip it to another drawing then I get all the extra linetype from wblock dwg...
2013 has a linetype called "proposed tile" and another one called "existing tile." 2012 doesn't have either. Is there any way I can could get those two files so I could load those two linetypes into 2012?
View 3 Replies View RelatedI have a problem between my template in inch and the one in mm.
Its the linetype scale that is wrong in the mm one, when i draw in the inch one, everything is fine but when i draw in the mm one, i have to set the ltscale to like 25 to see them at the same scale that they are in the inch one.
My guest is its because i've create my template for the mm one base on the inch one and i just change the unit type to mm. Is there a setting i could change that will arrange this?
Product Design Suite 2013
All block containing Circle, Spline or Ellipse have Linetype Reset when they are scaled in a drawing who contain more that 1 ViewPort. (tested with CAD 2010 -> 2014)
View 9 Replies View RelatedI created a macro to insert layers with a click of the button. I was wonder how I get my macro to add the linetype to it. Also would like a separate macro to make the layer not to plot.
Here is the Macro I'm using: ^C^C-layer;new;A-ANNO-AREA-IDEN;color;6;A-ANNO-AREA-IDEN;;
On Layer Manager can't see VP Color and VP Linetype see picture.
View 9 Replies View RelatedText style can’t be deleted!
Although, the text style “Simplexshx” (the file is attached) is neither used nor the current, but it can’t be deleted!
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I can not get rid of the phantom2 line type in my drawings.
View 9 Replies View RelatedCurrently in process of a quick fix, trying to create a linetype that should place a number in between the lines.
*One, Places 1 in between lines A,5000,-50,["1",CompatecStandard,U=0,Y=-125],-150
That's as far as I've gotten and it pretty much does what I want it too, but right now it is set to 5000mm before it makes a gap with a number. I would like that gap to be dependent on the length of the line... is that possible?
For example, if the line is only 4000mm I want the gap to be after 2000 instead of 5000.
AutoCad LT 2014
I am having an issue with the "upright" script in my ltype descriptions. Apparently it works the way it is supposed to and not the way I want it to.
The upright is set to 0 which orients the text in linetypes to be shown as "upright" to the model space. In most design cases; not an issue, but I am designing construction plans along a roadway and as such, north is not always "upright" to my viewport. Is there a script (ie ...,u=v],... or ...,u=vp],...) that will orient my text based on the line displayed in the viewport?
I'll start by saying that I'm using Civil 3D 2012...I've made a custom line type and am having issues with it. Basically, I'm trying to get the text (Green line with 4's) to flip around from it's current orientation, see attachment. I have already tried the REVERSE and MIRROR commands, with no success.
View 6 Replies View RelatedI'm trying to center text in a linetype, but at certain angles the text will no longer be centered.
Here is the linetype coding: A,1,-.25,["W",STANDARD,S=.2,U=0.0,X=-.1,Y=-.1],-.15
LINETYPE.jpg
Notice that the text on the vertical line are skewed the most.
How do I create a linetype with text that is similar to the waterline linetype or sanitary sewer linetype?
View 3 Replies View RelatedI made a custom linetype to represent a pipeline. The line is abbreviated by 5 letters. My problem is when I reach and curve in the pipe (an elbow), the text string does not follow the curve. It remains straight for the remainder of the text. Is there a way (autocad 2013) to have the text follow the path of a curve?
edit: I saw one similar topic from 2008 in this thread: [URL] and the best response there is the one posted by eldon where you break the code down to each letter. Still, the picture in eldon's post makes the text a bit jagged. Have any changes been made to AutoCAD since this post that make this easier?
I am trying to create a linetype(actually multible linetyes) for Civil drawings. I need the line type to have the following text..........12" W. I have tried to edit and existing linetype but for some reason the string does not seem to like me using the inch (") symbol. Any proper way to generate this linetype and I should be able to edit it to get all the other line sizes I need.
View 5 Replies View RelatedI made a custom line type called EX (for existing pipes) which looks a little bit like this: - - - EX - - - EX - - - EX - - -
Line works great when I draw from left to right. However, when I draw a line from RIGHT to LEFT, the text displays upside down a little bit like this: - - - X3 - - - X3 - - - X3 - - - ("3" representing the mirror image of "E")
Same applies when drawing from bottom to top, or top to bottom. I totally understand the behavior here, and TBH I think it's OK it behaves that way.
Let's say I'm drawing existing water pipes going in all directions with a polyline. Is there a way to make the text display upward no matter what direction the pline is going?