AutoCAD 2013 :: Get All Extra Linetype From Wblock DWG
Jun 19, 2013
Having an issue with linetypes that are proprogating within all our drawings in our office... I have tried to purge, delete all and wblock and nothing seems to work. The only thing that I found to work is superpurge...
Junk is the drawing that I erased everything. (junk drawing is 2.6M with nothing in it...) click on this link to download... [URL]........
I wblocked out wblock drawing and the size fell but the file still has all the linetype...
If I draw something in wblock and copy clip it to another drawing then I get all the extra linetype from wblock dwg...
I recently installed the SketchUp plugin in the hope that I would be able to easily and effectively transfer SketchUp models into AutoCAD and subsequently into Revit.
However, upon importing the SketchUp model, extra wireframe is added to the flat surfaces from vertex to vertex. This does not affect the CAD model as such as it appears that these lines are necessary for CAD to create the surfaces.
Though when imported into Revit from CAD, these surfaces are unable to be processed and the model becomes incomplete, also failing to identify the windows and doors that had been previously identified as the model had been taken from Revit, through CAD and to SketchUp with no problems and then all the way back again.
What is the next step of importing it back to Revit as I am unsure how to retain its levels (i.e Floor plans).
I am using 2013 and have a few 3D objects in the modeling space that I am using view base to put different views of each into the paper space. When I do this and export to PDF, I get an extra green line from the paper space. I have deleted and replaced the view and have tried different views with varying sucess.
Some pieces simply need a different view, however I have one that will not go away. The different view does really solve the problem either because I need the view with the problem. I have attached a picture of the issue, but it is just a chunk to protect information that I cannot share. The gray in the drawing is the part, the green line should not be there. The green line only shows up on the PDF, not in modeling space or paper space.
Is there a way to remove the extra sash lines which, in plan, are meant to represent the sash below the cut plane? I want to keep the sash "nub" at adjacent to the frame, but remove the lines which run parallel to the glass.
See attached pdf for detail of what I'm referring to.
With QP activated, if I select an object (say an alignment or profile view) on the screen and want to pick its GRIP, I have to click the screen FIRST to get focus back to the drawing window (so two clicks). The same applies to the contextual Ribbon, it takes two clicks to 'press' a ribbon button if QP is activated.
I am autocad 2010 user. I have drawing files from consultants with custom linetypes. I have deleted the. shx file but need to change line type. How do I select the relevant lines to convert to normal line type?
I am currently running AutoCAD 2013 LT on a Windows 7 64 bit system. I was recently running this same software on a 32 bit system computer and everything was running properly. After the upgrade, I have noticed a linetype issue that I cannot seem to get a handle on.
We use a "insul" linetype on building sections that should come out looking like an architectural insulation pattern. After upgrading to the new computer, this linetype only reads as dots, nothing else. I have gone to other comnputers in the office that are displaying this linetype properly and have copied their acadlt.lin as well as acadltiso.lin files over to my computer and it has not solved the problem.
Is there a way to start a custom line type so that is starts and ends with "O". Right now, the default "FENCELINE1" has circles in it, but it starts and ends with a line.
Here's their code for the line:
*FENCELINE1,Fenceline circle ----0-----0----0-----0----0-----0-- A,.25,-.1,[CIRC1,ltypeshp.shx,x=-.1,s=.1],-.1,1
I already tried just putting the O's at the ends, and that didn't do it.
Below is a picture of what I'm looking to get. The top one is the FENCELINE1, the bottom one is just circles and lines, but that's how I want the linetype to look when they place it... so first click would have a circle, second click would have a circle, and the circles "in" the line would spread out evenly.
Just so you know... this is for guardrail inside a where house where it has the circle pillars on each end with circular pillars in the middle (every 8', but the spacing isn't crucial).
I have a very particular client insisting I recreate a specific lineteype. The previous technician used AutoCAD Architecture 2012 to create a shape within the linetype. I have recreated the shape, with my AutoCAD 2014, but am struggling with creating the linetype 100%, and getting into other files.
I have a layer named XYZ, that contains ARC, LINE and POLYLINE. I want to get a list of all linetypes from every ARC, LINE and PLINE. If I open the properties, if I select only the ARC, under linetype I'm getting *Varies*. Instead of*varies*, I would like to have a list of all linetypes (ARC, LINE and PLINE).
Is it possible? WOuld it also be possible to do the same for linescale or weight?
2013 has a linetype called "proposed tile" and another one called "existing tile." 2012 doesn't have either. Is there any way I can could get those two files so I could load those two linetypes into 2012?
I have a problem between my template in inch and the one in mm.
Its the linetype scale that is wrong in the mm one, when i draw in the inch one, everything is fine but when i draw in the mm one, i have to set the ltscale to like 25 to see them at the same scale that they are in the inch one.
My guest is its because i've create my template for the mm one base on the inch one and i just change the unit type to mm. Is there a setting i could change that will arrange this?
All block containing Circle, Spline or Ellipse have Linetype Reset when they are scaled in a drawing who contain more that 1 ViewPort. (tested with CAD 2010 -> 2014)
I created a macro to insert layers with a click of the button. I was wonder how I get my macro to add the linetype to it. Also would like a separate macro to make the layer not to plot.
Here is the Macro I'm using: ^C^C-layer;new;A-ANNO-AREA-IDEN;color;6;A-ANNO-AREA-IDEN;;
i had been using autocad for almost 10 years now and i always have the newer version for my line of work.
i am having trouble with the excessive styles that shows whenever i copy and paste then the problems occur after that most often. copy paste problems, fatal errors, and my computer hangs most of the time.
I have noticed about a 50/50 chance of crashing when using Copyclip or Wblock, and the selection includes C3D objects (feature lines, etc.). Sometimes when I Wblock out, no file is written, then if I try to repeat it, there is about a 99% chance that is will crash on the repeat try.
I am in the process of creating a few really useful dynamic blocks. My problem is I wish to collect them in a library folder so each block is a stand alone dwg file. I know I used to to this in 2011LT, but that was some time ago and I have since changed company and we have 2012LT. I cannot for the life of me remember how to do this.
I have tried to do it the usual w-block way, but when I import them into a new drawing they are actually a block within a block. Is there a better way of doing this?
I am using ACAD 2000. My wblock and copyclip commands are not working only in one specific drawing. I am working in modelspace.
When I wblock it lets me select the objects and assign a file to save the objects to. When I hit OK it gives me no error but no file is created.
When I copyclip it gives me no error, but when I pasteclip, nothing happens.
I tried saving the drawing as something else. This drawing simply won't let me copyclip or wblock. I can use the copy command to make multiple copies of the object in question within the drawing. I tried restarting my PC and this particular drawing still has the same problem. Other drawings are fine.
Presently if I insert a block into my drawing - and a block with the same name exists - the newly inserted block takes on the definition which exists in the receiving drawing . How do I reverse this i.e. I want to be able to overwrite the existing block definition by inserting the new wblock version.
When I issue the Wblock Command I can not find the Dialog box to select objects and file location... This happens in the Layer Dialog when I try to change the color of a layer, the Color Dialog box can not be found. When I use the Block command the dialog box pops up, so I can see it.
I am using Autocad 2013, and need to have lisp wblock to a 2010 format file. Is there a way I can force it to, without the trouble of opening the file dialog box and setting the format there?
