AutoCAD 2013 :: Linetype - What The Parameters Are
Nov 7, 2013
Below are linetypes that we created for our use. We have tried to create others but we dont know what the parameters are
Height of text, spacing of line between text, center of text...
*RS-485,RS-485 ----485----485----485----485----485----485--
A,.5,-.2,["485",STANDARD,S=.2,R=1.0,X=-0.1,Y=-.1],-.6
*RS-422,RS-422 ----422----422----422----422----422----422--
A,.5,-.2,["422",STANDARD,S=.2,R=1.0,X=-0.1,Y=-.1],-.6
*RS-232,RS-232 ----232----232----232----232----232----232--
[Code] .......
View 3 Replies
ADVERTISEMENT
Nov 14, 2012
How can I copy a linetype definition from a drawing to the linetype definition file?
View 7 Replies
View Related
Aug 14, 2013
I am autocad 2010 user. I have drawing files from consultants with custom linetypes. I have deleted the. shx file but need to change line type. How do I select the relevant lines to convert to normal line type?
View 2 Replies
View Related
Mar 5, 2013
I am currently running AutoCAD 2013 LT on a Windows 7 64 bit system. I was recently running this same software on a 32 bit system computer and everything was running properly. After the upgrade, I have noticed a linetype issue that I cannot seem to get a handle on.
We use a "insul" linetype on building sections that should come out looking like an architectural insulation pattern. After upgrading to the new computer, this linetype only reads as dots, nothing else. I have gone to other comnputers in the office that are displaying this linetype properly and have copied their acadlt.lin as well as acadltiso.lin files over to my computer and it has not solved the problem.
View 3 Replies
View Related
Jan 14, 2013
Is there a way to start a custom line type so that is starts and ends with "O". Right now, the default "FENCELINE1" has circles in it, but it starts and ends with a line.
Here's their code for the line:
*FENCELINE1,Fenceline circle ----0-----0----0-----0----0-----0--
A,.25,-.1,[CIRC1,ltypeshp.shx,x=-.1,s=.1],-.1,1
I already tried just putting the O's at the ends, and that didn't do it.
Below is a picture of what I'm looking to get. The top one is the FENCELINE1, the bottom one is just circles and lines, but that's how I want the linetype to look when they place it... so first click would have a circle, second click would have a circle, and the circles "in" the line would spread out evenly.
Just so you know... this is for guardrail inside a where house where it has the circle pillars on each end with circular pillars in the middle (every 8', but the spacing isn't crucial).
View 9 Replies
View Related
Jul 8, 2013
I have a very particular client insisting I recreate a specific lineteype. The previous technician used AutoCAD Architecture 2012 to create a shape within the linetype. I have recreated the shape, with my AutoCAD 2014, but am struggling with creating the linetype 100%, and getting into other files.
View 9 Replies
View Related
Sep 20, 2012
rather than each time i change layers having to fix layer and linetype to each other how do i more permenatly fix the two together?
View 1 Replies
View Related
Jun 26, 2013
I have a layer named XYZ, that contains ARC, LINE and POLYLINE. I want to get a list of all linetypes from every ARC, LINE and PLINE. If I open the properties, if I select only the ARC, under linetype I'm getting *Varies*. Instead of*varies*, I would like to have a list of all linetypes (ARC, LINE and PLINE).
Is it possible? WOuld it also be possible to do the same for linescale or weight?
View 5 Replies
View Related
Jun 19, 2013
Having an issue with linetypes that are proprogating within all our drawings in our office... I have tried to purge, delete all and wblock and nothing seems to work. The only thing that I found to work is superpurge...
Junk is the drawing that I erased everything. (junk drawing is 2.6M with nothing in it...) click on this link to download... [URL]........
I wblocked out wblock drawing and the size fell but the file still has all the linetype...
If I draw something in wblock and copy clip it to another drawing then I get all the extra linetype from wblock dwg...
View 9 Replies
View Related
Jun 18, 2013
2013 has a linetype called "proposed tile" and another one called "existing tile." 2012 doesn't have either. Is there any way I can could get those two files so I could load those two linetypes into 2012?
View 3 Replies
View Related
Oct 23, 2012
I have a problem between my template in inch and the one in mm.
Its the linetype scale that is wrong in the mm one, when i draw in the inch one, everything is fine but when i draw in the mm one, i have to set the ltscale to like 25 to see them at the same scale that they are in the inch one.
My guest is its because i've create my template for the mm one base on the inch one and i just change the unit type to mm. Is there a setting i could change that will arrange this?
Product Design Suite 2013
View 2 Replies
View Related
Dec 12, 2013
All block containing Circle, Spline or Ellipse have Linetype Reset when they are scaled in a drawing who contain more that 1 ViewPort. (tested with CAD 2010 -> 2014)
View 9 Replies
View Related
Sep 24, 2013
I created a macro to insert layers with a click of the button. I was wonder how I get my macro to add the linetype to it. Also would like a separate macro to make the layer not to plot.
Here is the Macro I'm using: ^C^C-layer;new;A-ANNO-AREA-IDEN;color;6;A-ANNO-AREA-IDEN;;
View 1 Replies
View Related
Jun 10, 2013
On Layer Manager can't see VP Color and VP Linetype see picture.
View 9 Replies
View Related
Apr 29, 2013
I can not get rid of the phantom2 line type in my drawings.
View 9 Replies
View Related
Sep 28, 2013
i had been using autocad for almost 10 years now and i always have the newer version for my line of work.
i am having trouble with the excessive styles that shows whenever i copy and paste then the problems occur after that most often. copy paste problems, fatal errors, and my computer hangs most of the time.
View 4 Replies
View Related
Jul 18, 2013
Is it possible to add an if then statement to the parameters manager in dynamic blocks in Autocad 2014. For example, in the image below is it possible to put in A1... 'IF Dim1= 0, display 0, else (Dim1-79-50)'.
View 1 Replies
View Related
Apr 20, 2013
I have what I believe is a good use for block alignment parameters, but I'm having trouble getting it to work the way I want. Let's say I am building a space frame. I start by drawing a series of 3D lines from one node of my space frame to another which defines the center lines of each member of the frame. Then I have a block representing a tubular member of the space frame. I would like to add an alignment parameter to the block such that I can insert a member and align it to one of the 3D center lines. Preferably, I should be able to insert and align in a single step, although it would also be fine if that were two steps. For example, I could first align the block to one of the 3D lines, and then move the insert point of the block to a node point of the space frame.
I am able to create an alignment parameter on my block, but I find I cannot use it to align to a simple 3D line. It will align to the edge of a solid without problem, but not to a 3D line.
My alignment parameter is (I believe) inserted at the insert point of the block. Although, in the Block Editor you cannot seem to specify the insert point directly. Perhaps because I am editing the block its insert point is not available in that mode?
View 3 Replies
View Related
Jul 2, 2013
With Windows version of AutoCAD2013, I can't find the Dialog box of Parameters Manager (See the First Picture below) from Block Editor Tab in Manage panel (the Second Picture below.) When I pick the Parameters Manager tool, I could see something happened in a blink of an eye, and disappeared. I tried the line command by typing PARAMETERS, but to no avail. I clicked Parametriic from the menu bar, and then Parameters Manager for selection, but with the same result. I just can't display it.
First Picture: The Dialog Box I want to display:
Second Picture: Can't find it after picking the Parameters Manager tool in Manage Panel under Block Editor Tab:
View 3 Replies
View Related
May 4, 2013
I have this draft with the parameters given. I need to correctly make this a 3D...How do I insert the parameters given, so the draft correctly rise accordingly to the planes?
View 5 Replies
View Related
Nov 20, 2013
I am drawing a block that containes a number of other blocks which I want to control parametrically. For example. In one block, I have set the diameters of a circle restricted to 10 and 12-mm. I have a second block that also contains the circles which have similar restrictions. I now want to control the diameters of the circles from a single source - similar to shared parameters in Revit. Am I able to share a global parameter between blocks?
Eventually, I want to control a 2D drawing from a table only. Should I be using .Net or AutoLisp for this.
View 4 Replies
View Related
Aug 3, 2011
How can you access user-defined parameters/function defined in the Parameters Manager dialog?
View 1 Replies
View Related
Sep 21, 2011
Im wondering if its possible to link either a constraint dimension to an action parameter or vice versa. Or using a linear parameter's value in an user parameter formula.
Its a 2D cylinder, for winding purposes we just have a rectangle, with a distance from the Y axis for radial.
Parametric dimensions: B=thickness, C=Lenght, R=radius
User parameter: A=Diameter (R*2), Mass in kg ((((pi*(c*b))*(A+B))*1.25)/1000)/1000
For the BOM, i need A, B, C & mass
For drawing references for peoples on the floor, to distinquish a cylinder from a stick, we put lines at the top and bottom of the cylinder, 1mm distance inbetween them.
I figured that making a linear parameter + stretch on the thickness to replace the B parametric dimension, allowed me to make an array of that line, with increments of 1mm as i stretch the cylinder. The thing is that the mass formula cant take the value of action parameters....
Other alternative is to keep the B parametric dimension, and add a linear parameter as above for the array. But then i have 2 places to adjust, and from a test i made, if i change the R dimension, the linear one does not follow. Its very frustrating.
What i was hoping autocad would be able to do is distance1 for array to be same as B dimension, but it does not allow me to do that, unless im missing something.
View 0 Replies
View Related
Jun 14, 2013
I am new to AutCAD and where I can find or purchase line tpes specific to development (i.e. water, san, storm, edge of payment, top of slope, etc).
I do not have time to learn how to make linetypes as I am still learning the basics of the program.
View 2 Replies
View Related
Apr 2, 2004
How i would create a new linetype in AutoCAD LT 2004. For example creating an electrically traced line that is a dashed line with the letter E in the line.
View 6 Replies
View Related
Nov 8, 2012
I work with a drawing that for some reason don't have a proper fence line in it. I tried to load another .lin file, but still the fence line looks funny. The line I'm after looks and work ok in alla other files but this one!
I tried to copy paste a fence line from another drawing but what's pasted is just half the linetype...
The line should look like this -- / ---- / ---- / ---- but comes in as -- ---- ---- ----
Why do I loose the slashes?
*FENCEONBOUNDARY, Fence on boundary _____ / _____ / _____ / _____
A,.7,["/",STANDARD,S=.05,R=0.0,X=-0.1,Y=-.05],.1
The result should look like ----- / ----- / ----- / -----
View 4 Replies
View Related
Jul 15, 2011
i set linetype scale in one of the drawing which is lts value is set to 900..when i select line and open option in order to set linetype scale it show the message..
View 3 Replies
View Related
Apr 25, 2013
I looked through other threads and I still couldnt get it figured out. I am trying to make a linetype like the attached image..
View 7 Replies
View Related
Jun 15, 2012
I am using Map 3D 2013
I have several drawings in which I want to use a line type (centrex2) at a specific scale. The scale setting is exactly the same in all the drawings but in some the line type is coming out at different scales, all larger, but not the same or to a set factor. All the entities in question are poly lines (2d).
I have checked in all drawings that:
global scale factor and current object scale in the line type manager are the same (1.0)drawing units are the same (unitless)‘use paper space units for scaling’ is always deselected line type generation is always enabled.
View 1 Replies
View Related
Jun 7, 2012
Currently in process of a quick fix, trying to create a linetype that should place a number in between the lines.
*One, Places 1 in between lines A,5000,-50,["1",CompatecStandard,U=0,Y=-125],-150
That's as far as I've gotten and it pretty much does what I want it too, but right now it is set to 5000mm before it makes a gap with a number. I would like that gap to be dependent on the length of the line... is that possible?
For example, if the line is only 4000mm I want the gap to be after 2000 instead of 5000.
AutoCad LT 2014
View 2 Replies
View Related
Mar 22, 2012
my linetype scales in model space look good, when i go to paper space to print the linetypes are huge and way out of wack. what is my problem?
View 3 Replies
View Related
