AutoCad :: Set Linetype Scale
Jul 15, 2011i set linetype scale in one of the drawing which is lts value is set to 900..when i select line and open option in order to set linetype scale it show the message..
View 3 Replies
ADVERTISEMENT
AutoCad :: Basic Linetype Scale
Dec 9, 2011When I draw a line at my template it always has the line type scale 5 as default under properties.
I know that I can chance this by hand or chance a basic line type scale with the command "lts".
But all the lines in the drawings of our partner have the line type scale 1 under properties. So if I used "lts", there would either my lines or their lines be scaled wrong. Also I don't want to chance the default line type scale of each line by hand.
Is there a possibility to set up something that each line I'm drawing, starts with a specific line type scale as default under properties?
AutoCAD LT :: Change Linetype Scale For A Layer?
Oct 3, 2011I want to change my ground conductor from solid green to a dashed line (green is OK) on a set of drawings, but all the dashed linetypes I can find don't show up well at the scale that I've drawn the circuits. I can make them look OK by changing the linetype scale in the properties manager window, but there are a boatload of these lines in eight viewports; finding them all would be a major pain. They are all on a single layer, though, but in the layer properties manager I do not see a way to change the linetype scale for the layer. I could use the properties manager to make the change if I could select everything on the layer. Is there a way to do that?
View 4 Replies View RelatedAutoCAD 2010 :: Same Linetype And Scale But Different Appearance
Dec 13, 2011Same linetype and linetype scale but different appearance!
I got the linetype Dot2 with linetype scale 0.02
The linetype Dot2 with 0.02 linetype scale appears in two different ways!
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD 2010 :: Linetype Scale Does Not Work
Nov 19, 2012in layer translator the linetype scale does not work.
when i use layer translator, the resulted drawing comes with all layer ok but the linetypes scale does not.
AutoCAD LT :: Linetype Scale Not Compatible Between Two Drawings
Feb 8, 2013I'm using AutoCAD LT 2007 and have a problem with linetype between two drawings. I have a standard key which I use on a number of drawings, problem is when I copy from my original file (in model space) to paper space on another drawing the linetype isn't viewed the same.
I've set LTSCALE to 1. PSLTSCALE to 0, Global scale factor to 1 in both files but still no joy.
AutoCAD LT :: Linetype Scale Changes On Rotated Line
Aug 24, 2012Im using LT 2012 & have an issue with a few drawings.
Example:I draw a single line & set to 'Dashed' (or any other type). If i then rotate that line the linetype scale changes to a very small dash & the actual scale of the line changes. rotate it abit more & it will change again.
AutoCad :: Changing Linetype Scale For Just One Layer
Mar 11, 2004I have loaded an insulation linetype and I needed to make the ltscale of that line .194 in the linetype manager so that it would fit in my 3.5" walls.I would like my insulation linetype to always be drawn at .194 ltscale. All of my other lines/linetypes I would like to stay at 1.00
When I changed the linetype scale of the insulation to .194 every other ltscale went with it. Is it possible to change one ltscale independently of all your other linetypes?
AutoCAD 2013 :: How To Change Linetype Scale
Oct 23, 2012I have a problem between my template in inch and the one in mm.
Its the linetype scale that is wrong in the mm one, when i draw in the inch one, everything is fine but when i draw in the mm one, i have to set the ltscale to like 25 to see them at the same scale that they are in the inch one.
My guest is its because i've create my template for the mm one base on the inch one and i just change the unit type to mm. Is there a setting i could change that will arrange this?
Product Design Suite 2013
AutoCAD 2010 :: Linetype Scale Not Compatible Between Two Drawings
Oct 5, 2012I work very closely with a customer, and have been asked to implement their drafting standards for a dwg file they received from another vendor. I have attached two drawings, 1 (their vendor's) and 2 (mine, in progress). When opened, I notice the linetype scale *appears* different between the drawings (note the differences within "LINE LEGEND" section of both drawings). It *appears* as though Drawing 2 has double the linetype scale of Drawing 1.
I realize that within Drawing 2 I could set the LTSCALE variable to 0.5, but that seems like a work-around and may cause problems with other aspects of the customer's drafting standards in the future.
I've already confirmed that both drawings have the same values for LTSCALE, PSLTSCALE, MSLTSCALE, CELTSCALE. I've also already confirmed that, for the "PACKAGED EQUIPMENT" entry with the legend, the properties dialog box shows the exact same values for all fields. Lastly, (trying [URL] .....) I re-loaded the linetype for PHANTOM2.
I'd like to have them both appear the same, if possible.
AutoCAD Architecture :: Gas Linetype - Cannot Seem To Scale Text Properly
Jul 19, 2013I'm drawing a gas line (the one that says gas throughout the length of the line) and i can't seem to scale the text 'gas' properly, it seems that it is all squashing up and i cant make out what it says. I've tried ltscale, psltscale and the actual linetype scale of the line to no avail. I'm sure this is a simple problem, i just cant work it out.
View 2 Replies View RelatedAutoCAD 2010 :: Linetype Is Not Scaling Based On Annotative Scale
Oct 17, 2012I have a drawing (attached) with the following settings: LTSCALE = 1, MSLTSCALE = 1, PSLTSCALE = 1.For some reason the linetype is not scaling based on the annotative scale. It will update correctly if I change the LTSCALE but for some reason it wants to ignore the MS and PSLTSCALE variables.
As a note, the drawing was converted from a Microstation drawing and the linetype is a converted Microstation linetype.Is there something in the linetype that is doing this.
AutoCAD 2010 :: To Adjust Linetype Scale Until Dashed Line
Dec 13, 2012To adjust the line type scale until dashed line appear as fine or coarse as desire,Type:-
Ans - a) LSCALE b)LINESCALE c) LTSCALE d) None of the above.
AutoCAD 2010 :: Automatic Linetype Scale Update In Viewport?
Oct 25, 2013I'm sure I had linetype scaling updating automatically after a change of viewport scale - perhaps it was a previous release of AutoCAD. Why must I now keep pressing REGENALL to update the linetype scale?
View 2 Replies View RelatedAutoCad 2D :: Making Global Scale Factor And Linetype Scales?
Dec 3, 2013I’ve got a series of third party drawings that are quite intricate, with a series of nested blocks, some of which cannot be exploded.
The issue i have is that they have been drawn with a global scale factor of 1. Our office works with a global scale factor of 10.
Is there a quick and easy way to make the global scale factor 10, but then somehow retain the scale of the third party drawing lines so they retain their look?
Trying to avoid either just drawing with a global scale factor of 1 (which is a pain as all our blocks are set up for global scale factor of 10) or going into each of the bound xrefs and making all line scales 0.1 (mammoth task given the amount of drawings and all the nested/unexplodable blocks).
AutoCad :: Change Overall Linetype Scale Using Modify Properties Dialogue Box
Apr 19, 2013Quicker way to change the overall linetype scale than using the 'modify properties' dialogue box that comes with Autocad 2008? I've attached an image that specifically shows what I am trying to change, but I get tired of always having to scroll down in the box to find this variable. I would love to have something simple like the old DDCHPROP dialogue box (see smaller image). LISP routine or something where I click on the toolbar button, and simply change the overall scale without having to navigate through the native one?
2013-04-19_114756.jpg2013-04-19_114732.jpg
AutoCad 2D :: Linetype Scale System For Center And Hidden Types
Feb 23, 2012I have been adopting a linetype scale system for CENTER & HIDDEN types that works perfect on one drawing but not in another.
Here it is:
Globally,
Measurement:1
MSLTSCALE:1
PSTLSCALE:1
CELTSCALE:1
LTSCALE:1
CENTER lines are scale 0.1 (works fine in all drawings and in both 1:30 and 1:4 viewports)
HIDDEN lines are scale 0.3 (work in one drawing but failed in the second drawing in both 1:30 and 1:4 viewport)
Setting the HIDDEN lines to 10 works with most other drawing.
I want to know first of all why this setting of 0.1 CENTER and 0.3 HIDDEN works on one drawing and not on another one in spite of the general settings set alright.
AutoCAD Civil 3D :: Change Linetype Scale For Individual Survey Figures?
Mar 19, 2013He has a survey figure that is too short to display the text in the linestyle. When I change the linetype scale for the object, it has no effect.
View 1 Replies View RelatedAutoCad 2D :: Set Linetype Scale For 3 Paperspace With Different Page Setup Within Single Drawing
Jan 25, 2012How I set Linetype scale for 3 paper space with different page setup with in single drawing.
Explanation:I have a drawing with XRef attached, I want to make 3 paper space for this drawing with different page setup A0, A1 and A3. I am confused how I set line type scale for each paper space.
AutoCad :: Linetype Scale From Model Space To Paper Space
Feb 3, 2012I have an issue with linetype scale. I have a certain part of my drawing with dash lines at a linetype scale of 1000. In Model space it is fine but when I change to Paper Space the lines become solid. I have tried increasing the linetype scale in Model space to compensate for the scale in Paper space but the lines are still solid.
View 7 Replies View RelatedAutoCAD 2013 :: Copy Linetype Definition From Drawing To Linetype Definition File?
Nov 14, 2012How can I copy a linetype definition from a drawing to the linetype definition file?
View 7 Replies View RelatedAutoCAD 2013 :: Scale Command Message - Extremely Small Scale Factor Ignored
Apr 13, 2012I have just updated to Autocad 2013. While working on existing drawings (previously created in V2012), I am having issues with the SCALE command. Most times, but not always, when I add a line or block, with a base point on an existing line or object and try to scale it, I get an "extremely small scale factor ignored" message, although I did not get a chance to enter a scale factor. While it appears most times, but not always, if I draw a new line in empty space on that same drawing, I am able to use the SCALE command without problems. I also have the same issue when trying to scale an existing line or block, most times but not always.
Here is a copy of the command line while I am trying to make it work:
Command: l
LINE
Specify first point:
Specify next point or [Undo]: 100
Specify next point or [Undo]:
Command: sc
SCALE
Select objects: 1 found
Select objects:
Specify base point:
Specify scale factor or [Copy/Reference]:
Extremely small scale factor ignored.
Command:
SCALE
Select objects: Specify opposite corner: 1 found
Select objects: Specify opposite corner: 1 found, 2 total
Select objects:
Specify base point:
Specify scale factor or [Copy/Reference]:
Extremely small scale factor ignored.
If you notice, it does not give me the chance to enter a scale factor. As soon as I pick the base point, it skips over to the error message, yet displays the scale factor prompt with a blank factor. I'm experiencing this issue on various files (not all but most), so I don't think it is a corrupt file. Why I get this and if I can correct it?
AutoCAD Civil 3D :: Label Styles Annotation Scale Versus Viewport Scale?
Jun 26, 2009am in the process of setting up a standard file for all designers to use our local office. This file will have most of the styles created for profiles, alignments, surfaces, profile views, etc... as mostly specified by the customer and industry standards.
I am having trouble maintaining the correct annotation scale in the viewport in paperspace and when plotting.
The attached word document has 3 figures. Fig 1 shows the correct viewport scale and correct annotation scale. Fig 2 shows how the annotation scale abruptly changes during the plotting process. This abrupt annotation scale change sometimes happens during the regen process or when I switch from layout to model space and back to layout.The annotation scale goes from 1:1 to 1:40 just as in the viewport. This change in annotation scale is not supposed to happen because I want to preserve a certain plotting height for my text versus a viewport scale by using various annotation scales.
I have researched the procedures for annotation scale and have not found any info related to this "abrupt change in annotation scale".
Curiously , this abrupt change in annotation scale does not happen if the text does not belong to any styles within Civil 3D. Stand alone text stays at the correct annotation scale and is not affected in the same way.
AutoCAD 2010 :: Scale On Printed PDF File Not Matching The Plotted Scale?
Jun 27, 2012We have recently noticed that after printing a PDF of a drawing I plotted from AutoCAD we are coming up with differences when we double check the scale on the printed hardcopy using a carpenter ruler.
For example, there is a dimension labeled on the drawing of 200 ft. However, if I try to scale this out with a carpenter's ruler at the drawing was set to (say for instance it is 1 inch = 100 ft) I am coming up short of the 2 inches it should be (typically come up around an 1-15/16" or around 194 feet, approx 97% of the correct amount).
In the Page Setup Manager in AutoCAD, I have the following options selected (see the print screen as well):
Printer/plotter selected: DWG to PDF.pc3
Paper Size: ANSI full bleed B (11.00 x 17.00 Inches)
What to Plot: Layout
I don't have a plot scale scale other than the default 1" = 1'
No plot style selected
Then, on the print menu when I open the PDF that I have exported from AutoCAD, I have the following settings (see the print screens I have attached):
Printer: The printer I use (Konica Minolta c650 Series PCL)
And I have selected the Options "Auto Rotate and Center" and "Choose paper source by PDF page size**"
** Note, that I have tried unselecting the "Choose paper source by PDF page size" option and accordingly changed the paper size in the "Page Setup..." button at the btoom to match the document size (i.e. 11.0 x 17.0in) and it gets the difference to be closer (i.e. I now get 198 ft but some of my border gets cut off). See the print screen below for this a print screen of the print menu and sub-menu of Page Setup showing the paper size selected.
I saw that some people in other forums state that there is no real solution when trying to scale off of PDF's and that there should be a disclaimer saying as much if you are to send the file out to a customer who may rely on doing some in the field scaling from the printed copy of the PDF file. I find it hard to believe there is no solution as we have received some drawings from others whom the scaling works just fine.
AutoCAD 2013 :: Scale Of Drawing Field Versus Scale Of Object
Jun 27, 2013When I open a new drawing in my AutoCAD 2013 that I just recently installed last week, I encounter a problem that I am not familiar with from previus versions of AutoCAD I have worked on. First of all, the units default to decimal, and I want them to default to architectural, with feet and inches. I have to type UNITS in the command line every time I open a new drawing in order to adjust this. I have AutoCAD for Architecture 2012 on another computer, and the program automatically defaults to architectural units upon opening up. Just to let you know, the program I am having this difficulty with is part of a package called Autodesk Building Design Suite 2013. I was under the impression that it included AutoCAd for Architecture, but I think it has only standard AutoCAD.
The scale of the objects I draw vs. the scale of the drawing field is very out of proportion. What I mean is, when I open a new drawing and draw a 30' -0" line, the line appears so long on the screen that I cannot see the whole object, even if I zoom out to the maximum. I should be able to see the object in it's entirety. In fact, when I draw a line that is only 12" long, even when the zoom is all the way out, the line looks huge in length. I have tried adjusting the units to the architectural/inches setting of course, and I have tried adjusting the scale in model space from 1:1 to 1/4'=1'-0", but nothing is working.
AutoCAD Visual LISP / AutoLISP :: Set Plot Scale By Annotation Scale?
Aug 9, 2012I am working on automating page setups in model space and am looking for a way to set the plot scale equal to the annotation scale for scaled drawings with
(setvar "filedia" 0)
(setq a (getstring (getvar "cannoscale")))
(command "-plot" "YES" "MODEL" "" "" "" "" "" "" !A "" "" "" "" "" "" "_Y" "_N")
Setting the plot scale with !A causes the lisp to fail. However, when running each prompt through the command line individually, !A works fine. what is missing?
AutoCAD 2013 :: Blocks Insert At Large Scale In 2014 - Correct Scale In 2012
Nov 22, 2013I am trying to insert a block into a file in Acad 2014 and it comes in too large. If I insert the same block into the same file using Acad 2012 it comes in at the correct scale. Doesn't seem to matter if insunits is 0 or 1, or insunitsdefsource or insunitsdeftarget are also 0 or 1.
There must be some variable or variables I'm missing.
AutoCAD Architecture :: Synchronize Annotation Scale To Viewport Scale?
Mar 29, 2011I have a Viewport set to scale 1:100 and the Viewport is locked.The Annotation Scale displayed in the Viewport was 1:50.
When I clicked on the Synchronize Icon beside the Viewport Scale, the Viewport Scale changed, even though the Viewport was locked.
I was expecting the Annotation Scale to synchronize to the Viewport Scale.
Is this how it is supposed to work? and why does a locked Viewport Scale change?
AutoCAD 2013 :: Block To Scale Based On Plot Scale?
Apr 19, 2013I have a block that i would like to scale based on the plot scale when plotting.
We set up our drawings full size and occasionally we want to plot them at half size. We do this by setting the plot scale to 1:2 (custom) in the plotting dialog. We have a few blocks that we want to print at the same size on paper, essentially become twice as big.
Is there is a way to fix the size or just set a few scale states and have them automatically adjust based on the plot scale (not drawing/annotative scale)?
AutoCAD Civil 3D :: Making Annotative Scale Different From Viewport Scale
Nov 8, 2013I have a drawing with several layouts, and in one particular layout only, I want the text to be smaller than the annotation scale would dictate (the viewport is 1"=300', but I want the text to display at 1"=50' annotation scale).
I tried selecting the viewport and changing the "annotation scale" property to 1"=50', then the "standard scale" property to 1"=300'.
Strangely, this seems to work for a bunch of MText objects I have in the drawing, but it won't work for an alignment station label group or for a particular linetype...for some reason, those two things insist on having their annotation scale equal to the viewport scale.
I tried messing around with the alignment station label group's style but couldn't figure anything out. As far as the line/linetype, I'm completely at a loss why that one wouldn't change.
AutoCAD Inventor :: Scale A Part With Different Scale Factors In 3 Directions
Apr 15, 2013I have a 3D part, which I want to scale down to 0.5 the size in X and Y direcions, but I don't want to scale it down in Z direction.
Is this even possible? How do I go about doing it?