AutoCad :: Difference Between A Regular Block And A Wblock?
Feb 2, 2009What is the difference between a regular block and a wblock?
Or is wblock just a command?
What is the difference between a regular block and a wblock?
Or is wblock just a command?
I am in the process of creating a few really useful dynamic blocks. My problem is I wish to collect them in a library folder so each block is a stand alone dwg file. I know I used to to this in 2011LT, but that was some time ago and I have since changed company and we have 2012LT. I cannot for the life of me remember how to do this.
I have tried to do it the usual w-block way, but when I import them into a new drawing they are actually a block within a block. Is there a better way of doing this?
What method of block base point selection do you mostly use:
Screen selction point
WCS 0,0,0 point
Presently if I insert a block into my drawing - and a block with the same name exists - the newly inserted block takes on the definition which exists in the receiving drawing . How do I reverse this i.e. I want to be able to overwrite the existing block definition by inserting the new wblock version.
View 9 Replies View RelatedI made a write block from one drawing so that i could use it in another drawing. Now that i have inserted it into a different drawing i cannot explode it. I did not see the option to allow exploding when i created it.
I tried to create a regular block (not a write block) but then when i opened a new drawing and clicked "insert" "block" it was not in the list of available blocks?
Is there an anchor tool that will do this? The aec object is actually a Autocad MEP pipeobject but should fall under the AEC umbrella. I am inserting some blocks at specific pipe locations through dotnet and would like to anchor the blocks to the pipes in case the pipes have to move.
View 2 Replies View RelatedI am using AutoCAD 2000i I would like to click a button, hide the form, pick the text, I'm only picking one text item, then insert the picked text into a block. Then put the text into the attribute in the block..Insertion point of the block next to the text item.
Private Sub CommandButton2_Click()
frmGetData.Hide
'Set sset = ThisDrawing.SelectionSets.Add("SS3")
Set sset = ThisDrawing.PickfirstSelectionSet
sset.SelectOnScreen
'For Each ssobject In sset
'msg = msg & vbCrLf & ssobject.ObjectName
[code]....
I am trying to redefine Block A to Block B, Block C & Block D based off the value of an Attribute in Block A.
If the Attribute in Block A is "1" then redefine to Block B
If the Attribute in Block A is "2" then redefine to Block C
If the Attribute in Block A is "3" then redefine to Block D
I know it should be able to be done using If and Cond functions within a lisp routine, but I am in a hurry with it and don't have the time to research it anymore.
what does it mean when someone says a block is created on layer 0 vs a regular layer?
View 3 Replies View RelatedC3D 2011 / Update 2
I have noticed about a 50/50 chance of crashing when using Copyclip or Wblock, and the selection includes C3D objects (feature lines, etc.). Sometimes when I Wblock out, no file is written, then if I try to repeat it, there is about a 99% chance that is will crash on the repeat try.
Having an issue with linetypes that are proprogating within all our drawings in our office... I have tried to purge, delete all and wblock and nothing seems to work. The only thing that I found to work is superpurge...
Junk is the drawing that I erased everything. (junk drawing is 2.6M with nothing in it...) click on this link to download... [URL]........
I wblocked out wblock drawing and the size fell but the file still has all the linetype...
If I draw something in wblock and copy clip it to another drawing then I get all the extra linetype from wblock dwg...
I have used the wblock command to block out drawings for use by other companies and was backsaving by using the wblock browsing ellipsis.
I keep getting requests to backsave the blocks again, so this process doesn't seem to work.
is there a command to redefine/update multiple wblock?
View 5 Replies View RelatedI am using ACAD 2000. My wblock and copyclip commands are not working only in one specific drawing. I am working in modelspace.
When I wblock it lets me select the objects and assign a file to save the objects to. When I hit OK it gives me no error but no file is created.
When I copyclip it gives me no error, but when I pasteclip, nothing happens.
I tried saving the drawing as something else. This drawing simply won't let me copyclip or wblock. I can use the copy command to make multiple copies of the object in question within the drawing. I tried restarting my PC and this particular drawing still has the same problem. Other drawings are fine.
i'm trying to make WBLOCK but it is not working, it says: Wblock operation rejected due to a proxy object that does not allow copying.
View 7 Replies View RelatedLand Desktop 2009 Civil 3D Companion
When I issue the Wblock Command I can not find the Dialog box to select objects and file location... This happens in the Layer Dialog when I try to change the color of a layer, the Color Dialog box can not be found. When I use the Block command the dialog box pops up, so I can see it.
fildia>1
cmddia>1
attdia>0
I am using Autocad 2013, and need to have lisp wblock to a 2010 format file. Is there a way I can force it to, without the trouble of opening the file dialog box and setting the format there?
View 4 Replies View RelatedWblock when run from the command line used to erase the entities selected, now it seems it does not, but the dialog box shows an option to keep or erase the selected entities.
Any variable name that controls this functionality?
Although I have found code that should allow me to convert 2dpolylines to regular polylines, I am having troubles implementing it. At first I got the eInvalid Input but have since fixed that. However, the error now is that there is no error. Autocad just seems to lock up but I can still switch to visual studio and look at my code. It as though Autocad thinks it is doing something but my code is not doing anything. I can scroll around.
My code is this:
Try Dim acDrawing As Document = Application.DocumentManager.MdiActiveDocument
Using acDrawingLock As DocumentLock = acDrawing.LockDocument
Using acTransaction As Transaction = acDrawing.Database.TransactionManager.StartTransaction
Dim acBlockTable As BlockTable =
[code]........
i want to Regular text in a line in autocad what can i do
View 2 Replies View RelatedI am using Autucad 2012.... F3 is osnap and F8 is ortho by default.
Is there anyway I can assign osnap and ortho to other keys like "3" or "G" ?
How can i set the regular hatch pattern in AutoCAD LT 2014?
setvar hpname "ansi31"
After installation it is set to ANGLE.
I tried to save this with my template.dwg, but it is not there after a restart.
I want to save this in the general LT settings.
I have not done much isometric work for quite a few years now but i have a new company i am doing some freelance stuff for and the last in house person did all his drawings as isometrics. My problem is not working in isometric but when I switch to paper space..how do I convert those isometric drawings to regular 2d?...this might be basic stuff for some but like I said I haven't done this in quite some time.
They are using AutoCadLT 2005 & Building systems MEP...I usually use AutoCad 2000 at home.
In Inventor 2012 I could grab any part (except patterns of course) and move it anywhere into folders, out of folder, up down, wherever, till my hearts content. But in 2013 sometimes it lets me, sometimes it does not. Sometimes I select a group of parts and when I try to put them into a new folder it will place most of them in it tell me the others are not allowed to be moved? I must stress that these are NOT patterned parts, but stuff I have moved around for at least the last 2 versions of the software. Why in 2013 can I not do this as easily or at all in some cases? Is there a new check box checked by default I can't find? I have tried switching the browser between modeling and assembly view and sometimes it works and sometimes it does not.
It does this with both content center and non content center parts.
Inventor 2013 sp1.1
We recently installed Civil 3D on our computers. Some people started working in regular AutoCAD first rather than changing the workspace in Civil 3D. They have customized their ribbons. Is there a way we can copy those customizations and apply them to the 2D Drafting & Annotation workspace in Civil 3D?
View 3 Replies View RelatedMy 2009 Autocad Lt system is crashing on a regular basis with the following:
Fatal Error: Unhandled access violation writing 0x2FS0e798 exception at 77982FC6H.
I use AutoCAD 2010 and have never messed with MEP. Any way to convert those devices back to regular acad blocks.
We have a couple of seats of MEP and Revit just to test things out and see if we'd want to switch programs at some point, but otherwise we do everything on "regular" AutoCAD. Well, one guy went ahead and made changes to our sheets using MEP, and now it's causing compatibility issues. Ideally we'd like to fix that without having to redraw entire sheets or have to redefine our drawing standards mid-project.
I was wondering if there is a way to convert many regular fractions to stacked fractions without editing each one. I have a file full of fractions that all need to be stacked. It seems it would be quicker if I could select all the fractions and stack them at once rather then edit each one individually.
View 2 Replies View RelatedHow do you flip a regular left to right profile to read with the 0+00 on the right?
View 7 Replies View RelatedI was trying to create a design template in the Multibody Part environment (MBP) for design cases we use almost every day.We´re relying heavily on semi-finished products (plant construction), so 80% to 90% of our parts are plates, beams, pipes and similar. In most cases we create a welding assembly which has only the semifinished parts which are welded together.
What I expected from the MBP was to be able to preconfigure properties like materials and width, length and height before I create parts which then are placed into the assembly.
Now this doesn't work. So I have created some iLogic code that finds the base dimensions of plates (thickness, length, width) and adds this information to the custom properties so it shows up in the BOM.
This works with a template which I have added to this thread. Now what you do is choose this template for the solid bodies which are plates when you derive your parts after you have finished setting up your MBP.
In the template I have embedded an excel sheet, that searches for a numeric thickness value (discrete) in the "thickness" column.After finding the according entry in the excel sheet it will read out the item number from that column and writes it back into the custom properties.
We're using a PDM system the files get uploaded to and if the PDM system finds a known item number it will automatically connect the documents to the correct item master.
Right now this works only with one material for every template. Additionally I want to be able to get a prompt before the part get's saved, that asks me to define a material based on the data of my style library. How to do that with iLogic code pieces?I will work on this further and will update the thread with new functionality.
I want to copy just two pieces of information from a pipe network into a table. I would just generate an automatic pipe table, but those are not editable. Any quick way to copy and paste the pipe lengths and names in a network into a "regular" table?
View 7 Replies View Related