AutoCAD LT :: 2009 - System Crashing On Regular Basis?
Mar 13, 2013My 2009 Autocad Lt system is crashing on a regular basis with the following:
Fatal Error: Unhandled access violation writing 0x2FS0e798 exception at 77982FC6H.
ADVERTISEMENT
Photoshop :: CC Lockout On Regular Basis
Oct 15, 2013Since joining Photoshop CC I have been locked out on a regular basis. Each time, I am asked to sign in again and register, even though the registration page is fully filled out. This has happened three times in the last week. It isn't a matter of not paying the monthly fee...the payments show up in my account. Yet, each time, I get a message that my 'trial version' has expired. Except, I never downloaded the trial version. As I understand it, if you don't pay, you get a couple of months before you are locked out. Yet, here I am, fully paid up and locked out at least once a week. It's no big deal to sign in again but winter is coming and where I am, we regularly lose internet, sometimes for a week at a time. I also travel to remote corners of the globe. What am I supposed to do if this happens when I am cut off from the internet.
View 10 Replies View RelatedGIMP :: All Of A Sudden Crashing On Frequent Basis
Mar 8, 2013my Gimp is all of a sudden crashing on a frequent basis!!!! it could just be sitting there and I could be away from the computer and it crashes, I could just save or export the image and it crashes, I could just do one thing after opening an image and it crashes!!! it is crashing at RANDOM and WITHOUT explanation FREQUENTLY!!! I need fixing this frequent crashing issue!!!! I have NOT installed ANY new plug-ins or anything!!!
View 3 Replies View RelatedAutoCad 2D :: System Variable Values Need Changes Each Time Open 2009 File
Jun 12, 2011in autocad 2010 & 2009 certain commands are not working, but if we change certain system variable values, it will work. but the problem is each time when we open the file, we have to change that system variable.
View 2 Replies View RelatedAutoCAD Inventor :: 2009 Crashing When Translating Mechanical Desktop Files
Dec 22, 2011.My Inventor2009 keep crashing everytime i'm trying to traslate/import Mech. Desktop2009 files....Windows7 is my os platform.  Done all latest SP both for Inventor & Mech Desktop.
View 1 Replies View RelatedPhotoshop :: Illustrator Crashing System
Apr 11, 2006I've been having problems with Illustrator on my system. I have Illustrator as part of Creative Suite 2 Premium. It seems that when I have Illustrator open, and try to perform other functions on my computer (i.e. moving files from one location to another, opening another program, etc.) the system crashes and restarts itself. This doesn't happen every time just semi-frequently. Has anyone had a similar problem or know of a solution that might help? I have all the current updates for all of CS2.
View 1 Replies View RelatedPhotoshop :: Bridge CS4 Crashing In New System
Jun 24, 2009I have a new system with a new MB and CPU. The CPU is 3.20 gigahertz AMD Phenom II X4 955 and the Bridge version is Bridge 3.0.0.464 After a few minutes with about 150 images, Bridge will crash. I have 3GB of RAM, XP Pro (SP3).  The video setup is; ATI Radeon HD 4800 Series [Display adapter] ACR Acer X243W [Monitor]-24.0"
View 1 Replies View RelatedAutoCAD Inventor :: Automating Hidden Line Settings On A Per-part Basis
Sep 21, 2013A large part of my job is creating installation drawings for plants (equipment and catwalks). Â Usually what I like to provide the installers is a plan view showing the equipment / catwalks with the base pads of the supports visible as hidden lines. Â If I just turn on hidden lines in a view, then it is too crowded.
However, manually turning on hidden lines for hundreds of base pads (potentially) is a huge time-sink and usually involves going through the browser manually to find them all. Â What I would like to do is automate the procedure to some extent. Usually there is only 4 or 5 different parts in an assembly that I need to have hidden lines for.
3ds Max :: How To Assign Value As Per Vertex Basis In VertexPaint
Feb 18, 2014I have a mesh and it has VertexPaint modifier. How I can set values on a per vertex basis?
View 1 Replies View RelatedIllustrator :: Turn Off Anti-aliasing On Per Shape Basis In Adobe?
Jul 2, 2013I was wondering if there is or is a way for example to untick a setting so that I can turn off anti-aliasing for some shapes, and leave anti-aliasing on for other shapes?
View 5 Replies View RelatedPhotoshop :: CS6 Extended / Windows 7 64bit System Compare To 32bit System?
Jan 2, 2013I have had Window 7 64 bit operating system put on my computer.Will I get the benefits of additional Ram on Photoshop CS6 Extended?
View 1 Replies View RelatedAutoCAD Map 3D :: Installation Of 2009 X64?
Jun 30, 2010where can I get the link to download installation of AutoCAD MAP 3D 2009 X64.
View 4 Replies View RelatedAutoCAD .NET :: Converting 2D Polyline To Regular
Feb 13, 2013Although I have found code that should allow me to convert 2dpolylines to regular polylines, I am having troubles implementing it. Â At first I got the eInvalid Input but have since fixed that. Â However, the error now is that there is no error. Â Autocad just seems to lock up but I can still switch to visual studio and look at my code. Â It as though Autocad thinks it is doing something but my code is not doing anything. Â I can scroll around.
My code is this:
Try Dim acDrawing As Document = Application.DocumentManager.MdiActiveDocument
Using acDrawingLock As DocumentLock = acDrawing.LockDocument
Using acTransaction As Transaction = acDrawing.Database.TransactionManager.StartTransaction
Dim acBlockTable As BlockTable =
[code]........
AutoCad 2D :: How To Regular Text In A Line
Dec 31, 2011i want to Regular text in a line in autocad what can i do
View 2 Replies View RelatedAutoCAD Inventor :: How To Install MDT 2009
Oct 3, 2012My client wants to buy Inventor 2013 and want to installed MDT 2009. How to install MDT 2009 of inventor 2013? He has a large data base  of MDT. If he can not be installed MTD2009 he  will not buy inventor 2013.
View 2 Replies View RelatedAutoCAD LT :: Cannot Display DWG From 2009 On 2012
Jul 10, 2012A dwg obtained and developed from autocad 2009 was opened with autocad LT 2012 but could not display on the LAYOUT, although it does show on the MODEL.
I have tried to SAVE AS using the 2012 Autocad LT, but the drawing still wont display  on the LAYOUT.
AutoCad :: Block Rotation In 2009?
Aug 22, 2011My company is useing LDD2009, as well as map. when we make notations in our plans we use a block that is basicly a square with an attribute inside to represent a number, the nuber then corresponds to the same number and a description in a table.
Now, I have been asked to create / recreate (a)the block that would rotate per viewport, also; we are not usin dynamic leaders.
is there a way to either continue with the block or create a dynamic leader that would rotate per viewport, even in other drawings that have xrefs attached like Plan & Profile sheets that are separate drawings.
I'm not sure how autocad would handle the rotating as well as the location of the block and still have the leader point in the same place.
AutoCAD LT :: 2009 Compatibility With Windows 7?
Mar 26, 2013Try starting Autocad LT 2009 and get Error Message: "The application was unable to start correctly (0xc0000005). Click OK to close the application."
It was recommended to uninstall and reinstall the software ... the software will not uninstall ... get the following message:"The following problems were encountered which prevented AutoCAD LT 2009 from updating successfully:? - Error opening installation log file, Verify that the specified log file location exists and that you can writte to it"
AutoCad :: 2009 Save As Not Working?
Aug 8, 2011Problem: My Autocad 2009 SAVE AS not working properly, when I'm trying to save my work output or anything I want to make SAVE AS it's totally not working...
Is this cause by virus or there something wrong in my software?
AutoCad :: Image Not Printing In 2009?
Nov 7, 2011I have quite a few drawings in AutoCAD 2009 that have images attached. some of them print just fine and some wont print the image.
I inserted the image by the following: EditPaste SpecialPicture (Metafile) and they are tif files.
AutoCad :: 2009 PDF Printing - Different Layers Come Out Looking The Same
Jun 3, 2012I have AutoCAD 2009. When I print a PDF, all the different layers come out looking the same. In other words, in my drawing I have layers that are say green and other layers that are cyan. Supposedly, the green layer is darker and thicker than the cyan layer. But when I print the PDF, all the layers come out with the same thickness and darkness.
But if I plot the DWG file, the lines show up the way they should be. The problem only happens when plotting PDF's.
AutoCad :: Find Text In The 2009?
May 18, 2012How it got in AutoCAD 2009 when a word FIND ZOOM and stay on it rather To ZOOM EXTEND
View 1 Replies View RelatedAutoCad :: Image Set In One Coordinate System Into A Drawing In Another Coordinate System
Mar 14, 2012how do i get an image set in one coordinate system come into a drawing in another coordinate system?
View 3 Replies View RelatedAutoCAD 2010 :: How To Change F3 And F8 Into Regular Hotkeys
Aug 14, 2012I am using Autucad 2012.... F3 is osnap and F8 is ortho by default.Â
Is there anyway I can assign osnap and ortho to other keys like "3" or "G" ?Â
AutoCAD LT :: Set Regular Hatch Pattern In 2014?
Jun 28, 2013How can i set the regular hatch pattern in AutoCAD LT 2014?
setvar hpname "ansi31"
After installation it is set to ANGLE.
I tried to save this with my template.dwg, but it is not there after a restart.
I want to save this in the general LT settings.
AutoCad 2D :: How To Convert Isometric Drawings To Regular 2D
Mar 18, 2008I have not done much isometric work for quite a few years now but i have a new company i am doing some freelance stuff for and the last in house person did all his drawings as isometrics. My problem is not working in isometric but when I switch to paper space..how do I convert those isometric drawings to regular 2d?...this might be basic stuff for some but like I said I haven't done this in quite some time.
They are using AutoCadLT 2005 & Building systems MEP...I usually use AutoCad 2000 at home.
AutoCad :: Difference Between A Regular Block And A Wblock?
Feb 2, 2009What is the difference between a regular block and a wblock?
Or is wblock just a command?
AutoCAD Inventor :: New Workstation Compatibility With 2009?
Dec 10, 2013Our company is planning to buy new workstations Dell Precision T1700 [URL] and we have question about compatibility with Inventor 2009: Will there be issues with drivers or directx etc. that don´t match with Inventor 2009 ?
View 5 Replies View RelatedAutoCAD Architecture :: Missing AEC Objects In 2009?
Aug 13, 2008my OS is Vista 64bit. i was using ACA2008 SP1 without any problems about a year.i decided to uninstall it and start using ACA2009.i have uninstalled ACA2008, 3dsmax2008 and other autodesk apps and removed some folders 'autodesk' and 'autodesk shared' from vista system folders.i also delete 'autodesk' from registry (LocalMachine/Software & CurrentUser/Software).then i installed ACA2009 64bit without any problems. after install i start it and there wasn't any problems (but i do not use any AEC objects, so i don't know if they was working).next i installed 3dsmax2009 & sp1 for it. max worked OK.then i installed sp1 for ACA2009. instalation was OK... but when i start working on a project i realised that AEC objects (wall,door, etc.) dont work at all ACA2009 starts OK without any warning or something...it loads at startup AECarchBase (and other AEC related stuff) but when you are trying to use any of wall,door,window it does do nothing... for example when you select wall from tools pallete it shows command 'WallAdd' in command line and then wall command ends without any warning or something...it also doesn't work from command line or menu the strange thing is when i uninstall ACA2009 and install ACA2008 again problem was also now in ACA2008 !!!
View 9 Replies View RelatedAutoCAD Inventor :: 2009 - IDW Visibility Grayed Out?
May 19, 2008Just thought I would post this since I didn't see it anywhere else. With Inventor 2009, the views in IDW are automatically set to associative which causes the visibility option for parts/assemblies to be grayed out.
View 3 Replies View RelatedAutoCAD Civil 3D :: Sharing Between 2010 And 2009?
Aug 13, 2012I'm in a situation where I need to share my drawings with another guy in a different office an hour away. I'm using 2010 and he's on 2009. What is the best way for each of us to send drawings back and forth, and still be able to tweak each others work?Â
View 7 Replies View Related
