How can i set the regular hatch pattern in AutoCAD LT 2014?
setvar hpname "ansi31"
After installation it is set to ANGLE.
I tried to save this with my template.dwg, but it is not there after a restart.
I want to save this in the general LT settings.
I have been migrating dozens and dozens of .pat files from one version of AutoCAD to the next for many, many versions. Most recently in AutoCAD 2013 the .pat files were stored in the C:Program FilesAutodeskAutoCAD 2013SupportPatterns - worked fine. During the migration to 2014 I received an install error report stating that this subdirectory did not exist and could not be created. Alternately it stated that the new default path C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupport will be used instead.
At first I created the Patterns subdirectory where it could not be done automatically. No luck. Then I placed the Patterns subdirectory in C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupportPatterns and no luck.
when i want to use hatch in autocad 2014 LT, autocad stop working.
wheni chose my settings like pattern and scale everything is just fine.
after i select a field for hatching autocad stop responding.
this happend 9 out of 10 times...
im running service pack 1.
whenever I try to hatch something the cpu crashes. It even crashes in a new drawing file with nothing in it but a rectangle.
View 3 Replies View RelatedI recently downloaded new hatch pattern that were not in the AtoCAD hatch list and I really need..step to install them to the hatch list so AutoCAD can recognize them?
View 5 Replies View RelatedWhere the aclt.pat is stored? I could not find it in my cad file.
Are there anyother easier way to add a hatch pattern? In-addition, How do I use the command HPNAME (initial vale = ANSI31) what values can i set?
We are facing the problem of FATAL error while giving the HATCH command while using AutoCAD 2014 LT
We have successfully installed it on system and reinstalled it many times still the same problem , have attached the file for refrence.
Operating system is Windows 7 Professional 64 Bit
whenever you use the hatch command sends the message fatal mistake and closes the program.
already have the service pack 1 installed.
I have a bit of code that I use to create hatches but the names are just coded inside (like "BRICK" or "CLAY"); I would like to list all available patterns for the curent drawing(on a form, using a combobox, etc), which is the best way to go?
View 2 Replies View RelatedI have a hatch Pattern 'DOTS' (A default AutoCAD Pattern) filled in an area in my drawing. The layer is plottable. The pattern is in proper scale (I have attached a screen shot). Now, when I publish a PDF, though it shows up in the preview, it is missing in the pdf.
View 9 Replies View RelatedHow to make a hatch pattern with the words "NO GAS" on it.
Im using AutoCAD 2012.
I have created hatch in the same drawing but some hatch appears denser than other hatch yet they are all the same type of hatch, scale etc
I have changed the measurement variable from 0 - 1 but no luck
Any wave hatch pattern of know where I can download one. I have already been to [URL]........ but the files are only gifs.
View 3 Replies View RelatedI am using Autocad 2013 , and i have download many more hatch pattern from web , But i haven't know how to apply this hatch pattern in autocad 2013 .
View 1 Replies View RelatedThe hatch appears correct on the screen, but when printing there are voids created on the printout. These voids appear in different areas for each print. Our plotter is HPT790, that has all the software updates.
View 1 Replies View RelatedI have Autocad Architecture 2014 installed on my office PC and Laptop.A drawing with a hatch pattern set to a scale of 1 on my laptop needs to be changed to a scale of 25.4 to look the same on my PC. Both versions of ACA are US metric.
View 3 Replies View RelatedIn architecture 2012, I'm trying to get the Hatch Pattern Dialog Box to come up to see if I have custom hatch patterns loaded.
They do not show up in the drop down menu in Hatch Creations.
How do I get the Hatch Pattern Dialog Box to come up?
I have a CAD station that is having all sorts of issues all of a sudden. When one of our architects opens her drawings she gets the "Hatch - Large, Dense Hatch Patterns" dialogue box.
When I we choose the "Do not convert these hatch patterns" and open the drawing, it converts all the hatch patterns to solid anyway. This is mostly affecting the walls and converting all the hatch into one solid blob of a hatch.
One weird thing is this only happens in the medium detail display configuration. I can go to any other display and it is fine. The other weird thing is that these same drawings open fine on any other computer so it has to be a system problem.
The other gremlin I solved yesterday was that the system all of a sudden was not recognizing the LTYPESHP.SHX file. I had to add the DataCache support folder containing a ltypeshp.shx file to the support file search path.
Is it possible to assign hatch patterns for material styles? I need IV13 to draw Ansi32 for steel and Ansi31 for Aluminum automatically.
View 4 Replies View RelatedWhen I add the hatch pattern to the tool palette and then try to use it, it defaults the boundaries add command to pick points. Is there a way i can have it default to select objects?
View 1 Replies View RelatedWhy does my hatch pattern look different on sample in the hatch window and on the actual drawing?
I attached a picture where the top part is what it should look like and the bottom part is how it looks like on my drawing.
In some drawings "GRAVEL" Hatch pattern cannot insert properly. Outline of gravel has broken to several parts.To stop that what can I do?
View 5 Replies View RelatedI have Water Hatch .pat file can share ? Looking for those like wave kind of hatch.
I know i could use superhatch to create this by using a few arcs but im looking for a faster way.
I need to create a hatch pattern for a flooring tile that we have currently starting using and I am having real issues getting it to work!! The pattern is meant to be tiles set in a brick type style but with a rolling offset, but the tiles are different sizes - I have one row of 300x600, then a second row of 148 x 600, then another row of 300x600, then another 300x600, then a row of 148x 600, followed by another 148x600. This is the pattern end and needs to repeat itself. I have attached a line drawing of what it needs to look like.
I can get a very basic line drawing showing 300mm and 148mm for the first two lines but then it all goes wrong!
i want to creat hatch pattren own my choice. im using Auto cad 2012.
View 1 Replies View RelatedI'm trying to import a stone hatch pattern from the Internet but every time I try to import it into my hatch gallery it says error in pattern file. would like a couple different hatch patterns to show my customers rather than just brick.
View 9 Replies View Relatedi am looking for a sitework rock hatch pattern per the NCS(see attached image), but have not had any luck finding one.
rock symbol.jpg
i've tried to write the pattern myself, but it's not pretty.
Any way to keep from selecting a hatch pattern every time...
So like we have all these solid hatches that they need to see for these park maps and stuff, but I can never use the cursor to select the text or objects on top of the hatch. it is on a locked layer so that it does no move, but it still will only select the hatch when i try to click and drag a box over items in order to pick multiple items to move them all at once.
I know there are pick styles and pick first options but I like the way I have everything set up I just want my cursor to ignore the hatch patterns.
Where I could download a wood flooring hatch pattern. Not a parquet, but wood flooring that looks almost like plain lines, but interrupted randomly by a perpendicular line (which would be where the boards butt up against each other.
View 6 Replies View RelatedI have been asked to create a simple hatch pattern but it has been years since I've done this.
My hope and assumption is the pattern already exists.
See atatchment
I've got a recurring problem with using hatch patterns on 2013. Importing a new hatch pattern more than often than not results in Inventor winding up the memory usage on the PC to bursting point as it runs through "Calculating containment of profile areas" that seems to be called when previewing a hatch pattern.
The problem seems to be with more complex patterns (I'm using a stone wall type hatch - mountainledge.PAT is a prime example) and I think the issue is related to the scaling factor used. IF you remember to wind the scale up BEFORE trying to preview the pattern you can get away with a few minutes of down time, but if you leave the scale at 1 its goodnight!
It would be nice if Inventor could warn you (a bit like it does if you foolishly opt for a huge part array) becasue not only do you lose your inventor files but also any other unsaved app data as in my case my Dell M6500 PC just dies as all available memeory just gets swallowed up.
Perhaps I should try multiplying the co-ords in the PAT file by 25.4 as it could be that we use the poorer cousin of the good old inch system. metric???
