I have Autocad Architecture 2014 installed on my office PC and Laptop.A drawing with a hatch pattern set to a scale of 1 on my laptop needs to be changed to a scale of 25.4 to look the same on my PC. Both versions of ACA are US metric.
View 3 RepliesI am running Civil 3D 2010. I have hatch a bunch of areas with the gravel pattern hatch. However, they are at different scales. When I try to change the scale I get a totally different hatch pattern. I have attached a screen shot showing my problem. Hatch picture.pdf
View 3 Replies View RelatedI need to change the hatch size (not the pattern scale or space, juste the hatch size).
Exemple : I have a circle, and a hatch inside the circle. The radius of the circle is 10, so the radius of the hatch is 10 too.
What i want to do is to make the hatch smaller (or bigger) like this : Circle radius : 10, Hatch Radius 5 (or 15).
My first idea was to recreate a new circle with radius 5, and a new hatch inside and then erase the second circle. It works, but not very effective in my case.
So, it's why i came here to ask if there is any solutions to make this faster, easier, without having to recrate another hatch, another circle...
I have created hatch in the same drawing but some hatch appears denser than other hatch yet they are all the same type of hatch, scale etc
I have changed the measurement variable from 0 - 1 but no luck
I am using Autocad 2013 , and i have download many more hatch pattern from web , But i haven't know how to apply this hatch pattern in autocad 2013 .
View 1 Replies View RelatedThe hatch appears correct on the screen, but when printing there are voids created on the printout. These voids appear in different areas for each print. Our plotter is HPT790, that has all the software updates.
View 1 Replies View RelatedIn architecture 2012, I'm trying to get the Hatch Pattern Dialog Box to come up to see if I have custom hatch patterns loaded.
They do not show up in the drop down menu in Hatch Creations.
How do I get the Hatch Pattern Dialog Box to come up?
I have a CAD station that is having all sorts of issues all of a sudden. When one of our architects opens her drawings she gets the "Hatch - Large, Dense Hatch Patterns" dialogue box.
When I we choose the "Do not convert these hatch patterns" and open the drawing, it converts all the hatch patterns to solid anyway. This is mostly affecting the walls and converting all the hatch into one solid blob of a hatch.
One weird thing is this only happens in the medium detail display configuration. I can go to any other display and it is fine. The other weird thing is that these same drawings open fine on any other computer so it has to be a system problem.
The other gremlin I solved yesterday was that the system all of a sudden was not recognizing the LTYPESHP.SHX file. I had to add the DataCache support folder containing a ltypeshp.shx file to the support file search path.
When I add the hatch pattern to the tool palette and then try to use it, it defaults the boundaries add command to pick points. Is there a way i can have it default to select objects?
View 1 Replies View RelatedFor some reason I can't change the hatch pattern scale prior to hatching an object although after placing the hatch I can. The procedure I am using is as follows in LT2011. Select hatch, set the hatch style, over type the scale say to 100, click inside the area to hatch. Immediately the hatch pattern scale sets itself back to 1 I then have to type 100 back in and then the hatching will be set.
View 0 Replies View RelatedI am trying to edit the flemish bond hatch pattern. How can I find out what each number is the .pat file represents?
View 3 Replies View RelatedWhen I draw a brick wall in the north-south or west-east direction, the pattern is at 45 degrees, but when I draw a wall at any other angle, the pattern is still at 45 degrees but not relative to the brick wall.
View 2 Replies View RelatedACA2011
So I've got a Construct that is the building model. I also have a View file for my 2D extracted elevations. I've just 'Refreshed' one of the elvations based on some updates I did to the construct model. But when the 2D elevation refreshed, it's surface hatching (roof tiles) scaled itself down considerably. What controls this? I need to have that hatching scale back up and don't know how.
I would like to know how i can find the good scale for hatch. Is there an other mean to find by aleatory ?
View 4 Replies View RelatedIsn't there a way of taking an existing hatch patter off a drawing file and load it into your hatch library?
View 2 Replies View RelatedI have a Viewport set to scale 1:100 and the Viewport is locked.The Annotation Scale displayed in the Viewport was 1:50.
When I clicked on the Synchronize Icon beside the Viewport Scale, the Viewport Scale changed, even though the Viewport was locked.
I was expecting the Annotation Scale to synchronize to the Viewport Scale.
Is this how it is supposed to work? and why does a locked Viewport Scale change?
I recently downloaded new hatch pattern that were not in the AtoCAD hatch list and I really need..step to install them to the hatch list so AutoCAD can recognize them?
View 5 Replies View RelatedWhere the aclt.pat is stored? I could not find it in my cad file.
Are there anyother easier way to add a hatch pattern? In-addition, How do I use the command HPNAME (initial vale = ANSI31) what values can i set?
I have a bit of code that I use to create hatches but the names are just coded inside (like "BRICK" or "CLAY"); I would like to list all available patterns for the curent drawing(on a form, using a combobox, etc), which is the best way to go?
View 2 Replies View RelatedI have a hatch Pattern 'DOTS' (A default AutoCAD Pattern) filled in an area in my drawing. The layer is plottable. The pattern is in proper scale (I have attached a screen shot). Now, when I publish a PDF, though it shows up in the preview, it is missing in the pdf.
View 9 Replies View RelatedHow to make a hatch pattern with the words "NO GAS" on it.
Im using AutoCAD 2012.
Any wave hatch pattern of know where I can download one. I have already been to [URL]........ but the files are only gifs.
View 3 Replies View RelatedIs it possible to assign hatch patterns for material styles? I need IV13 to draw Ansi32 for steel and Ansi31 for Aluminum automatically.
View 4 Replies View RelatedWhy does my hatch pattern look different on sample in the hatch window and on the actual drawing?
I attached a picture where the top part is what it should look like and the bottom part is how it looks like on my drawing.
How can i set the regular hatch pattern in AutoCAD LT 2014?
setvar hpname "ansi31"
After installation it is set to ANGLE.
I tried to save this with my template.dwg, but it is not there after a restart.
I want to save this in the general LT settings.
In some drawings "GRAVEL" Hatch pattern cannot insert properly. Outline of gravel has broken to several parts.To stop that what can I do?
View 5 Replies View RelatedI have Water Hatch .pat file can share ? Looking for those like wave kind of hatch.
I know i could use superhatch to create this by using a few arcs but im looking for a faster way.
I need to create a hatch pattern for a flooring tile that we have currently starting using and I am having real issues getting it to work!! The pattern is meant to be tiles set in a brick type style but with a rolling offset, but the tiles are different sizes - I have one row of 300x600, then a second row of 148 x 600, then another row of 300x600, then another 300x600, then a row of 148x 600, followed by another 148x600. This is the pattern end and needs to repeat itself. I have attached a line drawing of what it needs to look like.
I can get a very basic line drawing showing 300mm and 148mm for the first two lines but then it all goes wrong!
i want to creat hatch pattren own my choice. im using Auto cad 2012.
View 1 Replies View RelatedI'm trying to import a stone hatch pattern from the Internet but every time I try to import it into my hatch gallery it says error in pattern file. would like a couple different hatch patterns to show my customers rather than just brick.
View 9 Replies View Relatedi am looking for a sitework rock hatch pattern per the NCS(see attached image), but have not had any luck finding one.
rock symbol.jpg
i've tried to write the pattern myself, but it's not pretty.