AutoCad 2D :: How To Convert Isometric Drawings To Regular 2D
Mar 18, 2008
I have not done much isometric work for quite a few years now but i have a new company i am doing some freelance stuff for and the last in house person did all his drawings as isometrics. My problem is not working in isometric but when I switch to paper space..how do I convert those isometric drawings to regular 2d?...this might be basic stuff for some but like I said I haven't done this in quite some time.
They are using AutoCadLT 2005 & Building systems MEP...I usually use AutoCad 2000 at home.
View 9 Replies
ADVERTISEMENT
May 14, 2013
When I start an Iso drawing should I use the 3D Views under the View tab and set it to SW Isometric or should I use the Snap/Style/Isometric way? I like using the 3D views, but it doesnt set the drawing up the same. What is the accepted procedure.
View 7 Replies
View Related
Aug 23, 2013
I'm using Autocad LT 2012. If I draw in an isometric view, is there a way to look at each direction to see the different views? For instance if I make a cube, can I hatch all six sides with different colors to show if I'm looking at the correct view?
View 7 Replies
View Related
May 25, 2010
I have been asked by one of my clients to provide an isometric piping diagram for a product that we have modeled/developed for them. We have already provided models, review drawings, design drawings, and fabrication drawings for this product but what they are looking for is a simple isometric pipe diagram where they can hand write their weld test data and put the material data sheet number references. I have submitted a sample of a drawing we completed with an isometric view of this piping as a full view (iso view created by IV) but they are requesting something simpler like they are used to (one-line iso pipe spool-type thing with symbols instead of modeled valves, etc.). I am embarking on a process to get them to change their standard but I was wondering what you experts thought while I am doing this (in case they refuse).
I don't want to create drawing that isn't tied to the model somehow for obvious future-revisions-parametric reasons so I was wondering what you think my options would be for keeping this all in IV (instead of just doing something seperate in AutoCAD.
Inventor Professional 2013 (SP-2.3), Product Design Suite Ultimate
Desktop: Intel Core i7 3.4GHz, 16.0 GB RAM, Windows 7 Ultimate SP-1, 64-bit OS, (2) GeForce GTX 580 (331.81), Space Pilot Pro (3.16.1)
Laptop: Intel Core i7 3.9GHz, 16.0 GB RAM, Windows 7 Pro SP-1, 64-bit OS, GeForce GTX 780 (331.81), SpaceNavigator (3.17.7)
View 5 Replies
View Related
Oct 22, 2013
I was wondering if there is a way to convert many regular fractions to stacked fractions without editing each one. I have a file full of fractions that all need to be stacked. It seems it would be quicker if I could select all the fractions and stack them at once rather then edit each one individually.
View 2 Replies
View Related
Nov 7, 2013
Any routine or way to convert a nested xref to a regular xref?
View 4 Replies
View Related
Jun 10, 2012
I'm working on a small project: a 2 story single house.
There are some curtain walls in the house. Also, a sliding glass door within the curtain wall. I want the same window schedule covers both the regular fixed windows and curtain walls.
Is it better to convert the curtain walls to regular windows? Or there are other better options?
View 2 Replies
View Related
Oct 20, 2011
I have some particles that i've used the Instancer (Replacement) on to turn into a mesh that I have modeled and place throughout the scene. Now I want to convert the instanced particles to regular geometry.
View 1 Replies
View Related
Jan 13, 2010
I wanted to create an isometric text in isometric view to indicate different names in different part.
Attached is the picture for reference.I did it using dimension, check the "hide dimension" option.But i can't hide the extension line.
how to create an isometric text?
View 8 Replies
View Related
Jun 6, 2012
I am using INV 2012 and I wan to to know a trick how to convert the weldment assembly back to regular assembly template.
View 1 Replies
View Related
Aug 11, 2012
I am new to autocad, i wanted to know if i can convert 2d drawings to 3d ?. I work in the aluminum openings industry making doors and windows, i have all my aluminum profiles drawing in 2d.dwg and i want to convert it to a 3d model and then extrude it for a certain length so that it look like an aluminum profiles bars ?
View 7 Replies
View Related
Jan 31, 2002
How or where to go to find out how to convert Autocad LT drawings into programs our CNC machining centers can use? Autocad assured me it would do this when we bought it. I just can't seem to find any info on it.
View 8 Replies
View Related
Jan 31, 2012
how to convert drawings to pdf files? I am not getting a best free tool.
View 4 Replies
View Related
Jun 27, 2011
I want to convert drawings to JPEG or any other appropriate format so that I can make a 15 min video presentation on Camtasia Studio or Power Point.
View 9 Replies
View Related
Mar 20, 2014
I accidentally converted a path to a text path. I searched the forum for how to convert it back to a regular path. The answer I found said to select the path and hit Command+C+F. This gives me another text path! I now have at least 6 copies of the path in my files but they are ALL text paths and none are visible with a stroke.
View 5 Replies
View Related
Jul 29, 2012
I need to put my 3d model on a piece of paper, so I need to have annotate and different views (FRONT and/or TOP and/or Right) of the model.
I tried to use FLATSPOT command, but all annotations (dimensions) are gone. Also, is there any easy way to do annotations?
View 5 Replies
View Related
May 10, 2013
I am trying to convert scales of drawings and photocopies.I'd like to transfer a 2200mm line which is on an A3 sheet at 1:100 to an A4 sheet which is a photocopy of a drawing that was originally A3 at 1:100.
What scale rule should I use to draw the representation of the original 2200mm line on the A4 photocopy?
View 9 Replies
View Related
Sep 20, 2011
I am not a user of AutoCAD and i am only using it to try and convert the drawings that i have into an excel or csv format.....
I am running AutoCAD 2009 and the drawings are "tables" per say.....with a generic block template from an engineering company, along with text and the company logo.
Is there a way to bring this into excel for easy formatting as i am not an experienced or trained AutoCAD person.....
View 5 Replies
View Related
Aug 6, 2009
I want the bottom layer to be the background layer, but I can't figure out how to convert it. I'm running CS3, FYI.
View 6 Replies
View Related
May 26, 2013
We have just recently updated our templates to use a new TTF font. We are a multi national office, and are running various machines in both Australia and China. We are all using windows 7. Autocad are all full versions but vary between 2010 and 2012.
We are trying to convert survey drawings from a standard font to the ttf, but for some reason, in the Chinese office only the decimal points disappear after the conversion. The same drawing when sent to the Australian office works fine and the decimal points are there. What to try here, as I am in Australia and can't even reproduce the issue the chinese office is having.
View 9 Replies
View Related
Nov 30, 2012
I am working with a client who works in CATIA V5 and I am in Autocad 2012. Is there any software out there that can accurately convert, in both directions, both 2D and 3D drawings?
View 9 Replies
View Related
Jul 22, 2013
I have 4500 OS mapping tiles which i need to convert the colors to one single color rather than the varied layer colors they have at present. Obviously doing this manually will take a long time.
View 8 Replies
View Related
Feb 24, 2012
In my 2D drawings I use a lot of splines. I restore/convert antique drawings of ancient boats and sailplanes in/to Autocad 2012. I use these drawings as a raster image and draw precisely over the handcrafted lines. So these original drawings contain a lot of hand shaped (organic) formes that go through, by dimension defined, fitpoints (so as indicated on the original plan) and are tangent to other lines elsewhere in the plan.
As I draw a lot of these splines, I want to manipulate the default settings in order to save time and effort.Is there a way in Autocad 2012 to increase the weight, by default, of a vertex point in such a way so that the vertex point becomes a fit point by itself? What is the maximum value to give to a vertex point? Does it become a fit point then?
When a fitpoint and a vertex point coincide, how to keep them stay that way; that means relocate both at the same time when editing the spline, and not one seperately.
I don't want to see these splines to leave the points they absolutely should go through as I clicked them when drawing the spline. I want splines to be smooth, and to stay smooth even after replacing fit points or vertici. And I don't have the time to re-re-re-re-refine every single spline I draw, as I draw so many. I've tried so hard to fix this problem, but I can't, probably because of incompetence.
View 1 Replies
View Related
Apr 17, 2008
Any ideas how to convert photos to line drawings? The best I've come up with so far is greyscale, then filter / stylize / find edges. Not bad .... but I think I could do better.
View 2 Replies
View Related
Dec 28, 2012
I'm using ACAD LT 2008.
When i try to copy paste some drawing entities from a heavy drawing file to any other file, the program blocks and says 'not responding', endlessly. So i always have to shutdown the program. I experience the same problem using the designcenter: when I try to copy a layout into another drawing, my computer gets stuck.
Another annoying problem with these files is that they are so heavy, while in fact they shouldn't be. I tried the aectoacad file command. In result the file id half as big, but after I open it and save it, again is the original size.
View 5 Replies
View Related
Apr 2, 2013
Every now and then I go back and try to use publish to speed up printing but I always go back to plotting one by one.
I work in a housing construction office and I have 10 separate drawings side by side in model space for house plans that I need plot separate to give to certain people. My problem isn't that I can't publish them separately its that I can't save them over existing pdf's individually predetermined.
Q1. do i just have to go through and change every layout name before or after i publish?
Q2. how do i change the output publish location?
Q3. can each layout be saved to a different existing pdf and remember it?
Q3. can i save these setting across to a new drawing?
View 5 Replies
View Related
Feb 6, 2008
I'm currently taking an CAD program and I'm having trouble drawing a few objects in isometric perspective. These objects must unfortunately be drawn in 2D. I've drawn the orthographic perspectives for each object based on the dimensioning given however I'm unsure how to proceed on certain portions of the drawing. This is all homework and I doubt using any customization is allowed.
The first image is a top view of a fixture. I'm having trouble with the central portion which I draw by first constructing the vertical arm then using the array command.
Is there some way to create an array of this object that respects the isoplane that I drew my isocircles in?
If not, I'm able to look at the original using the VPOINT from the 1,-1,1 point and get the perspective that I want. Is there a way to use the UCS and trace over the orthographic perspective then take that traced image back to the world X-Y plane? I've tried this before but once I get it back it simply looks like the orthographic perspective.
The following drawing I'm simply having trouble drawing one particular curve which the green arrow points to. The drawing is of two perpendicular intersecting cylinders one having a slightly smaller radius then the other and the curve in question represents the edge formed by the intersection. The research I've done indicates that it's an ellipse however I'm unsure how to draw it correctly and the one I put in is simply an estimate. How can I construct the correct curve? Even if I could change viewpoints I'm not sure I could find a way to trace this one.
How to draw 2D isometric images from orthographic projections in AutoCAD as it seems many of the sites I find are either trivial or focus on drawing by hand.
View 9 Replies
View Related
Jul 4, 2013
I have a 3D model, only poly-lines, i would like to turn it into a 2D isometric drawing (model space). Something similar to flatshot would do the trick. (flatshot works only on surfaces and solids...)
View 3 Replies
View Related
Dec 17, 2013
how to chamfer an isometric box. I need to do the 2 front edges but unsure.
View 9 Replies
View Related
Nov 7, 2012
Im new to CADTutor, and fairly new to AutoCAD. I used to use Plant 3D which has the ability to create PCF's and Isometric drawings, but Im now using MEP. for the most part, a better solution for our company, but now we cant create isomtric shop drawings. AutoCAD now has Isometric WS CLoud. how we can create a PCF file from an AutoCAD MEP 2013 drawing? its seems rediculous that it cant?
it seems like Isometric WS is real loser if you can only use with Plant 3D
View 1 Replies
View Related
Feb 13, 2013
Although I have found code that should allow me to convert 2dpolylines to regular polylines, I am having troubles implementing it. At first I got the eInvalid Input but have since fixed that. However, the error now is that there is no error. Autocad just seems to lock up but I can still switch to visual studio and look at my code. It as though Autocad thinks it is doing something but my code is not doing anything. I can scroll around.
My code is this:
Try Dim acDrawing As Document = Application.DocumentManager.MdiActiveDocument
Using acDrawingLock As DocumentLock = acDrawing.LockDocument
Using acTransaction As Transaction = acDrawing.Database.TransactionManager.StartTransaction
Dim acBlockTable As BlockTable =
[code]........
View 7 Replies
View Related
