AutoCad :: MEP To PCF File For Isometric WS?
Nov 7, 2012
Im new to CADTutor, and fairly new to AutoCAD. I used to use Plant 3D which has the ability to create PCF's and Isometric drawings, but Im now using MEP. for the most part, a better solution for our company, but now we cant create isomtric shop drawings. AutoCAD now has Isometric WS CLoud. how we can create a PCF file from an AutoCAD MEP 2013 drawing? its seems rediculous that it cant?
it seems like Isometric WS is real loser if you can only use with Plant 3D
View 1 Replies
ADVERTISEMENT
Jan 13, 2010
I wanted to create an isometric text in isometric view to indicate different names in different part.
Attached is the picture for reference.I did it using dimension, check the "hide dimension" option.But i can't hide the extension line.
how to create an isometric text?
View 8 Replies
View Related
Feb 6, 2008
I'm currently taking an CAD program and I'm having trouble drawing a few objects in isometric perspective. These objects must unfortunately be drawn in 2D. I've drawn the orthographic perspectives for each object based on the dimensioning given however I'm unsure how to proceed on certain portions of the drawing. This is all homework and I doubt using any customization is allowed.
The first image is a top view of a fixture. I'm having trouble with the central portion which I draw by first constructing the vertical arm then using the array command.
Is there some way to create an array of this object that respects the isoplane that I drew my isocircles in?
If not, I'm able to look at the original using the VPOINT from the 1,-1,1 point and get the perspective that I want. Is there a way to use the UCS and trace over the orthographic perspective then take that traced image back to the world X-Y plane? I've tried this before but once I get it back it simply looks like the orthographic perspective.
The following drawing I'm simply having trouble drawing one particular curve which the green arrow points to. The drawing is of two perpendicular intersecting cylinders one having a slightly smaller radius then the other and the curve in question represents the edge formed by the intersection. The research I've done indicates that it's an ellipse however I'm unsure how to draw it correctly and the one I put in is simply an estimate. How can I construct the correct curve? Even if I could change viewpoints I'm not sure I could find a way to trace this one.
How to draw 2D isometric images from orthographic projections in AutoCAD as it seems many of the sites I find are either trivial or focus on drawing by hand.
View 9 Replies
View Related
Jul 4, 2013
I have a 3D model, only poly-lines, i would like to turn it into a 2D isometric drawing (model space). Something similar to flatshot would do the trick. (flatshot works only on surfaces and solids...)
View 3 Replies
View Related
Dec 17, 2013
how to chamfer an isometric box. I need to do the 2 front edges but unsure.
View 9 Replies
View Related
Mar 6, 2013
I'm using AutoCAD 2012 LT. I'm drawing an isometric object at 30 degree and -30 (330) degree angles. How do I set my line to use this angle and switch between these angles? The current rotate function is killing me.
View 2 Replies
View Related
Nov 6, 2012
I recently started drawing in cad, and i have a couple problems. At time now i am trying to learn more of isometric drawing and i have couple questions about drawing a particular figure:
21.jpg
So in there i don't know how to draw that "thing" witch i highlighted in red. I don't know at witch angle i should draw it's center(center length should be 50 cm). If I would know that, i could easily draw a isocircle above. So how do i find this "right" angle?
Second question would be about isofillets - i read here in forums that i should do them in isocircles, and i did that and i got good results - it looks very good, but the problem is, that in this drawing, it shows that those isocircles should have a defined radius - R6, R16 and etc, but if i do round corners with isocircles, i dont get that result(in R16 case radius is even way too big). So maybe there is a way to do them "right" and have them defined? I attached that drawing .
View 9 Replies
View Related
Sep 10, 2013
Dimensioning in Isometric gave me a genuine PITA. Download my solution here .
View 0 Replies
View Related
May 14, 2013
When I start an Iso drawing should I use the 3D Views under the View tab and set it to SW Isometric or should I use the Snap/Style/Isometric way? I like using the 3D views, but it doesnt set the drawing up the same. What is the accepted procedure.
View 7 Replies
View Related
Jun 2, 2012
I don't know how to rotate the 3D image to exactly the isometric view (30 degree, in this case) I need. I'm using AutoCAD 2005. how exactly to draw curves right in isometric view without using 3D?
View 9 Replies
View Related
Sep 14, 2013
You can control the orientation of holes on a PCD while working in Isometric, but it's an intricate and tedious piece of projection.
View 9 Replies
View Related
Feb 11, 2013
im doing both isometric view and top view of a floor plan in a single paper at the same time.
the problem is ..when i change the view to isometric.. the drawing that is intended for top view changes to isometric view also..
how can i change the view of a single object to isometric isolatedly,, without affecting the other drawings and remain in its current position?
btw im using autocad 2007.
View 6 Replies
View Related
Aug 16, 2011
how to draw polygon in isometric?
View 4 Replies
View Related
Nov 13, 2012
I need to check if all my three views are correct.
I attached the dwg
How do I annotate the views?
View 9 Replies
View Related
Dec 13, 2011
I seem to be having trouble posting a text in NE isometric. I tried to convert to layout but no images appeared.
View 2 Replies
View Related
Jul 23, 2012
I'm working on a project where I've modeled obstacles for an obstacle course on a military installation and I'm having some issues with isometric views and adding dimensions at various UCS orientations.
Basically, each obstacle has a plan view and an isometric to depict height of some of the material above ground level and below.
I've tried re-orienting the UCS to accomodate the dimensions and it works to a degree but there has to be an easier way.
When I select the points for my dimension, I'm prompted...
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
I need the dimensions to be vertical in the isometric. I've been messing with it and I was able to eventually get it right but is there an easier way?
Whenever the dimension is drawn in model space the dimenion ends up far from where it needs to be. I always have to relocate it and re-select where I want the dimension lines to be.
Also, is there some kind of add-on that might make 3D dimensions easier?
Also, I have a thin solid representing the ground level so that everything below ground level results in a hidden line (due to the visual style I'm using) in the isometric drawings.
This works out great but any dimensions below ground level end up hidden. I don't think there is any way around this though with the style I have in use.
I've gone with simple callouts specifying overall material heights to avoid these issues in the meantime.
View 4 Replies
View Related
Aug 27, 2013
trying to draw a hex nut in isometric...I've got the ellipse with the inside/outside dimensions but as far as placing the lines and connecting them to make the hexagon perimeter I keep coming up wrong..
View 3 Replies
View Related
Sep 6, 2010
How can I make a drawing in isometric?
View 9 Replies
View Related
Mar 29, 2012
I have been trying to plot as a PDF an isometric view from CAD. I am using CAP Studio for these 3D symbols and for some reason even though I have monchrome.ctb selected under Plot Style Table my PDF is printing in color, not all black.
View 9 Replies
View Related
Jan 31, 2013
my DWG is set to monochrome.ctb. Everything prints ok except my 2 isometric 3D viewports which prints in its real color (visual styles are conceptual). Why don't they print also in monochrome? I saw a couple of discussions on that problem but the "hidden" and "hidden 3D" options in shade option isn't working...I want them to stay the same, just print in monochrome with screening! I read about some option called "hidden legacy" but can't find that anywhere.
View 2 Replies
View Related
Nov 13, 2012
AUTOCAD 2012 - Is it possible to use the array feature in Isometric view?
View 4 Replies
View Related
Dec 11, 2013
why when I rotate the mtext to be isometric in this drawing, the multiple lines become offset.
I created the mtext orthagonally like normal and used the rotate command 30 or -30 angles. Is there some other type of isometric rotate or something.
View 1 Replies
View Related
Sep 28, 2012
We have been putting dimensions on isometric views and the dimensions have been coming out fine. Now, however, we have an isometric and the dimension is about 400mm out and is not on the plane/face it should be.
View 5 Replies
View Related
Nov 19, 2013
I am trying to draw a "u bolt" in an isometric drawing. I found one solution, that served the purpose of giving the customer the general idea of the stands we are trying to sell them, but I'd like to know if there is a way to draw it properly.
I have attached a pdf to show what I came up with. Pipe Stands.pdf The only way I could think to get it to work (look right) in isometric view was to draw to vertical lines, make an arc across them with the elipseisocircle, and then use the path array to fill the U shape with the isocircles. This keeps the tubular shape, and the number of circles resembles bolt threads.
My problem is that the u-bolt is only threaded on the ends, the arched part should be smooth. Since this u bolt is to clamp fiberglass pipe to the stand, those threads (in my drawing) could cause damage. In this instance, I just explained this in the email to the customer, but I'd like to find a way to draw it proper.
View 9 Replies
View Related
Mar 18, 2008
I have not done much isometric work for quite a few years now but i have a new company i am doing some freelance stuff for and the last in house person did all his drawings as isometrics. My problem is not working in isometric but when I switch to paper space..how do I convert those isometric drawings to regular 2d?...this might be basic stuff for some but like I said I haven't done this in quite some time.
They are using AutoCadLT 2005 & Building systems MEP...I usually use AutoCad 2000 at home.
View 9 Replies
View Related
May 25, 2011
My boss said i could generate an isometric view of a drawing if i have the plan, elevation, and side views (makes sense enough). how do i go about doing this? is there an existing thread i can be forwarded to? (searching "isometric" didn't seem specifically useful.)
View 9 Replies
View Related
Jan 13, 2012
Is this possible to change isometric snap angle? which is by default set to 30 degree.
View 7 Replies
View Related
Aug 23, 2013
I'm using Autocad LT 2012. If I draw in an isometric view, is there a way to look at each direction to see the different views? For instance if I make a cube, can I hatch all six sides with different colors to show if I'm looking at the correct view?
View 7 Replies
View Related
Mar 19, 2012
Is there a way to turn off automatic isometric view when returning to the model from a sketch view (in 2012)?
View 5 Replies
View Related
Apr 1, 2010
Is it possible to creat Single Line Isometric from the Piping Model?
View 4 Replies
View Related
Jun 21, 2011
I have Autocad Architecture 2011 and it was working perfect until Yesterday. I Repair and then Reinstall but still the same problem.
When I have a Parellel (isometric) View and transfer to perspective works well but when I exit from the orbit function everything disappear and the cursor become crazy. I push pan and appears the drawing I release pan and the drawing disappear. The same problem in a viewport. I setup the perspective view on the viewport, lock the v-port, save and close the drawing, then open the same drawing and the perspective view become Isometric.
View 1 Replies
View Related
