why when I rotate the mtext to be isometric in this drawing, the multiple lines become offset.
I created the mtext orthagonally like normal and used the rotate command 30 or -30 angles. Is there some other type of isometric rotate or something.
Lisp routine that will rotate Mtext to the same angle as the angle of a selected line and the allow you to place the mtext object where you wish.
I know there is an lisp out there called RTL that will allow you to do this with regular or Dtext, but I will not work with Mtext.
I wanted to create an isometric text in isometric view to indicate different names in different part.
Attached is the picture for reference.I did it using dimension, check the "hide dimension" option.But i can't hide the extension line.
how to create an isometric text?
If I put a single line text and use it several times and then select them all I can change them in the properties all at ones. How do I do that with Mtext, if I select all and go to the properties they are opened one by one and you can change that.
Is there another way to do that as a single line text with the same.
I am trying to add labels everywhere on my drawing to show the properties of my objects i.e. lines. (But the thing is, I need static text). This is because I need to be able to "distort" the drawing for legibility purposes but retaining the label information. This is a common drafting task in surveying. Solution A - add the labels and then convert then into text. (I don't think Autocad allows this) Solution B - add the mtext via script, but so far I am stuck on the text editor.
Here's what I have done so far. mtext 100,100 <-- I'll need to come up with some calculation to automatically place the text in the middle of the line. j mc r 96d08'27" 130,100 "186° 08' 27""" <-- how to you add the content of the mtext object?
I am using LT 2013. I cannot figure out how to match properties for text. I click on the 2 options and the box witdth, orientation, layer will match but not the style or font. I have tried using Quick Properties to select but have not had any success with this tool. Here is what I did:
Created a style and named it Arial.
Open the Quickselect box.
Apply to : click the box and select the various mtext objects.
Object Type: mText
Properties: Style
Operator: Select All
Include in New Selection Set is checked.
I click Ok and the objects are selected.
Next I go to the Properties Manager and change the style to the one I want to use, bu the text does not change. If Idoubleclick a text object it shows the correct style, but not the correct font. What have I missed doing?
I used the CHANGESPACE command today to bring a piece of mtext from model space to paper space. I had a background mask on the mtext and when it came into paper space, the height of the text box displayed right but the width stayed the same as it was in model space. I played around with column settings and also the WYSIWYG in editor settings. Nothing seemed to make difference. What am I missing? Using autocad 2014
View 7 Replies View RelatedThe dialog box for MText is turned off. How do I turn it back on so I can edit text from the editor?
View 9 Replies View RelatedI have an older drawing that was created by somebody else that is chock full of bad CAD. I have to add some leaders to some text and I'm using the "QLeader" command. For some odd reason when I implement "QLATTACH" it won't attach the leader to the text.
Yes, I could recreate the text with the Qleader command but I'm trying to avoid having to do that because there is a lot of text. I'm not a fan of the rigidness of Mleader either so that is not an option.
When I create Mtext with a Bullet list, I want to change the bullet to something of my own choosing, instead of the blakc dot. I've been looking into this before, but couldn't find a solution. Some time back, I received a drawing from someone else. See attachment. It contains a piece of Mtext wich uses an alternative bullet, in this case a hyphen. So it CAN be done. Only thing is, I can't figure out HOW they did it?
View 4 Replies View RelatedI have made a dynamic block with attribute text. Everything works fine except the text comes out as larger than the mtext that it was created from. The text height & the width factor are the same since i created the attribute default by copying the mtext. when i close the block the text appears longer than the mtext it was created from.
View 2 Replies View RelatedIs there a way to change the defaults?
Presently, the Fill Color defaults to "Red" and I have to check "Use drawing background color" every time. Certainly there must be a way to change this?
While I am at it, how about line space distance? Ditto on default justification, height, etc., etc.?
Is there a way to create an attribute or MTEXT in a block where part of it is User defined and the other part is constant?
e.g.
"AUTOCAD = 12345 LAYERS"
Where "AUTOCAD =" and "LAYERS" are constant
and
"12345" is the user defined part.
The reason why I would like this is because i want to be able to Middle Center Justify the text and if i were to create 3 separate texts then it wouldn't be good (2 texts and 1 attdef)
sent drawing out to vendor, received back drawing where they had changed the width factor to .75. is there a way to globally edit all these mtext entities?
View 2 Replies View RelatedI used "save as" to create a new drawing from an existing file that I did not have any problems with. For some reason, the mtext that already existed shows up in my viewports as well as new leader text, but any new mtext that I've added does not. The viewports were also already existing from the previous file. I have not changed any settings either!
All of the layers are on, and I've tried deleting and re-adding the viewports with no luck. All of the text settings are the same as the original file, and like I mentioned before I did not have any problems with the previous file.
While working in a drawing, I noticed that my leaders looked a little odd. They had ALL lost their verticies and upon further investigation I realized that the mtext is no longer attached to the leader (i.e. when you select text and grab the grip and move, the leader, text end, does not follow). Start a new leader command, and all is well with the new leader and text but the old leaders remain disconnected.
This is a new file originated in 2013. Audit was 0. Restarted AutoCad, checked a bak file and auto-save, no changes to mleader settings or attachments. I do no recall executing any out of the ordinary commands or changing settings.
I'm currently using AutoCad 2013 on a Lenovo Thinkpad X230 with windows 7 64 bit. I have 8 gb of ram and a core I7 processor which seem up to the task for the rather small files I create. My issue is that whenever I initiate the mtext command or attempt to edit an mtext object, my cpu usage will jump from about 0 to 4% up to 20 to 30% and will stay at that level until I close the drawing. This causes the fans to run constantly and makes working a little more jumpy. I've tried removing AutoCad completely and reinstlling. I've tried loading up AutoCAd 2014 (and subsequently removing it) and now I'm back to AutoCad 2013 and the problem persists.
I'm assuming it has something to do with the computer or some other software that is running in the background. It's odd that it would only affect this one command. The computer is only 1 month old and I've done the hardware checks that Lenovo offers (no problems indicated).
I guess it does NOT support it because it seems that it does NOT work properly. For example, in case of multiple lines of “Horizontal” setting, it works properly like followings. But in case of multiple lines of “Vertical” setting, it does NOT work properly like followings.
Configure of “Horizontal”:
ABC
DEF
GHI
Configure of “Vertical”:
ABC DEF GHI
In my perspective, it should go downward like followings.
In my “perspective” of Vertical”:
A
B
C
D
E
F
G
H
I
We are making application software for importing DXF file from AutoCAD. If AutoCAD does not support multiple lines of vertical setting on mtex, our software also should not support it, I think. I want to know the specification for multiple lines of vertical setting of AutoCAD.
When i type "qleader" and go to settings and then check the "Always left justify" option under MText Options it will not save. I go open up another drawing and have to do this again. Is there anyway for it to keep the setting?
View 4 Replies View RelatedRecently installed AutoCAD 2014, and I'm currently trying to type the text:
TC1: 2/90 x 35 MGP10 studs with 4/2.8mm dia nails each end
It keeps stacking the 2/90 into the fraction 2 over 90. How can I turn auto-stacking off? I know I managed to turn it off for AutoCAD 2012, but now I can't find the option or system variable.
I have a set of notes for a given jurisdiction that I need to show on mumltiple layout tabs within the same file. However, the notes need to change their width, number of columns, height, etc. for each layout tab to work with viewports and other drawing elements within each tab. My question is this- is there way using fields, blocks, rtext, something that will allow me to create one master copy of the note and basically have instances of the note on those other tabs that I can adjust the wrapping, height, columns etc.? I could just create a bunck of copies of the same note, but then if we get a comment from an AHJ about the notes, we need to make sure the comment is addressed in each instance of the note instead of just one master note. Is there way to do what Im asking, or is the technology just not there yet?
View 8 Replies View RelatedI have multiple singular text objects on my screen and I want to convert them to mtext so I can use the Background Mask option within mtext on my drawing. how to quickly select all the text and convert it to mtext without it combinin ginto 1 mtext?
View 9 Replies View RelatedTool to combine multiple pieces of Mtext into a single Mtext with paragraphs?
View 9 Replies View RelatedWhy is this happening?
The dwg was fine, then it crashed while changing from modle space to paper space...
When i recovered the dwg, EVERY MTEXT I try to edit becomes rotated vertically and stays that way when i close the edit box...
I do not recall hitting any buttons or making any keystrokes without my knowing...
Is there a way to get my text back to Horizontal and stay that way?
I tried setting the MTEXTFIXED to: 0, 1 & 2.
NONE of these options changed anything.
I NEED to have this fixed. more importantly, i need to know why this is happening sop that i can take steps to prevent this happening in the future...
I am currently working with the latest CAD available.
I have numerous MText paragraphs that I need to combine into a single piece of MText. I want the paragraphs preserved in the final piece. I've found some routines that can combine pieces of MText but I don't know if they preserve the paragraphs.I have DotSoft Toolpac but it doesn't seem up to the task. C
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
Autocad Express Tools allows converting text to mtext. How would I be able to combine multiple mtext into a single mtext?
View 7 Replies View RelatedWhen i insert an OLE i want to rotate it from vertical to horizontal, but the rotate button just moved the full image around a point.
View 4 Replies View RelatedThis week I upgraded from 2011 to 2014 and have noticed a major change in rotating the UCS around only the Z-axis.
Looking at the attached image (the blue box is just to represent the relationship between the pipes):
I want to, as a simple example, rotate the UCS around the Z-axis from the end of one pipe to the end of the other.
In 2011 UCS, Z would allow me to select the end of one pipe and the end of the other and rotate to the angle of the red line shown.
In 2014 UCS, Z rotates the UCS from some unrelated point.
In 2014 UCS then selecting the two ends rotates the UCS X-axis to the direct line between the two.
In a working scenario the end of the two pipes would be in vastly different positions. Drawing a line between them, flattening it then using UCS, E on the flattened line give the functionality I want, but is a very slow way of doing it.
there is no way of selecting 2 points for a Z-axis rotation.
TL;DR
In 2011 if I wanted to rotate the UCS around the Z-axis I would type UCS, Z then select 2 points and the UCS would rotate around the Z-axis but the X & Y axis would remain as it was. This is no longer the case in 2014, how do I do this now?
I am trrying to rotate the view that I have in my viewport. I used to use a command that had the options Alingn, rotate etc but in this moment I do not remember that command. I you do not remember either
View 6 Replies View RelatedIs there a lisp that can be assigned to a script file to rotate-reference all items in a file always a certain way. This would be used to rotate files that are exported from revit before another team, that work only in CAD, can use them.
View 2 Replies View Related mvsetup gives this error, i want to align and rotate my object in a viewport....
The file mvsetup (.lsp/.exe./.arx) was not found in your search path. check the installation of the support files and try again.nil