Is there a lisp that can be assigned to a script file to rotate-reference all items in a file always a certain way. This would be used to rotate files that are exported from revit before another team, that work only in CAD, can use them.
View 2 RepliesAutoCAD 2014 creating "fatal error unhandled access violation reading 0x0010 exception at 65e3f417h" while attempting to reload a MicroStation file that worked previously in dwg.
View 9 Replies View RelatedI knew how to use Reference Manager to replace xref saved path. Otherwise, if we change the xref file name also, RM could work?
View 3 Replies View RelatedI frequently use ROTATE with the reference option, which is a very useful tool. Just wanted to do this again, but instead of the usual 4 point picking process I am asked to "Specify the reference angle" after choosing "reference". Never came across this before.
Did I unintended change some settings? It´s the first time I use ROTATE after reinstalling my AutoCAD a few days ago.
Noticed that the multiple copy option has been removed from the rotate command? It used to be that I could choose the copy option in the rotate command and set a reference angle to create multiple copies of an object based on a rotational axis. Now the command will let you copy based on a reference angle, but only once. Is there a system variable I can set to bring this option back?
View 1 Replies View RelatedI'm working on a large infrastructure project with numerous of drawings. On quite a few layout drawings I need to have the same base set of references, however I need to change the layer settings (colors, lineweight etc.). This cannot be done in the base reference itself as it is used by others. As the layouts I work with includes other references as well, it is time consuming to filter and change layer settings on each base reference.
My concept is to have a master reference file to manage all layer settings and add/remove base references. When the master reference is referenced into the layout, all layer settings on the base references should stay as set in the master reference. In this way I can easily control all base references with one file and make sure all changes will be the same for all the layouts.
New illustration of concept:
I have an object that when scanned in was not straight. I would like to draw a reference line that is drawn across the object that I know is horizontal in the artwork. I then want the object rotate to that line. Is that possible?
View 14 Replies View Relatedis possible to retrieve the information of the reference in the iam file without open the file in session ? Opening with notepad the iam file, at the end of file, the references is contains in the planar text.
Is possible to retrieve documentation for this request ?
I have a surface, to which I've added data from a ENZ file. No problems - I had a workable surface. I want to be able to work on the drawing at home as well as work. So I brought home the DWG as well as the ENZ file thinking that if both were in the same directory, it would work OK. But I get an error saying the Point file can't be found. I can't see any way to make the file reference relative, rather than absolute.
View 5 Replies View RelatedIs their a way to know or extract the file type or file extension of an External Reference file?
View 3 Replies View RelatedI want to reference an idw sheet from one file into another idw file.
Purpose:To duplicate details from one drawing into another drawing without copying sheets from drawing to drawing.
This prevents changing the annotations of the original detail in files that have the same detail that someone may change.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
Reference Manager? I get (AutoCAD component has stopped working. A problem caused...)
This is as soon as I select the icon.
I can open up AutoCAD 2012 Reference Manager without any problems.
I wonder if this can be done. i have a number of blocks which have labels to them i.e. JW1, JW2, JW3 etc. which corresponds to the block name. Is it possible to have the label automatically referenced to the block name so if i change the block name to JW10 the label within the block changes to JW10 as well.
View 4 Replies View RelatedMicrosoft Visual C# 2010 Express..Trying to create first dll in 2013, referenced acdbmgd and acmgd (as usual, as in previous versions) then included:
using Autodesk.AutoCAD.Runtime;
using Autodesk.AutoCAD.ApplicationServices;
using Autodesk.AutoCAD.DatabaseServices;
using Autodesk.AutoCAD.Geometry;
but ...
Error in IDE (Visual C#) when entering: [CommandMethod("TEST")]
Error: CommandMethod could not be found .. are you missing a using directive or an assembly reference
I´ve used AutoCAD for a while but this just appeared. The reference points are not displayed on a current line (or any other figure) when I want to join another figure with it, what I mean is that the little green x or square figures won´t appear when I want to join two objects at a point. If I create a circle, for example, and I want to create another circle around it, both with the same origin, AutoCAD won´t display that origin automatically.
View 2 Replies View Relatedhow to turn off the Block Reference Dialogue Box that appears when you put your cursor over and object or text?
View 2 Replies View Relatedwhy when I rotate the mtext to be isometric in this drawing, the multiple lines become offset.
I created the mtext orthagonally like normal and used the rotate command 30 or -30 angles. Is there some other type of isometric rotate or something.
When i insert an OLE i want to rotate it from vertical to horizontal, but the rotate button just moved the full image around a point.
View 4 Replies View RelatedThis week I upgraded from 2011 to 2014 and have noticed a major change in rotating the UCS around only the Z-axis.
Looking at the attached image (the blue box is just to represent the relationship between the pipes):
I want to, as a simple example, rotate the UCS around the Z-axis from the end of one pipe to the end of the other.
In 2011 UCS, Z would allow me to select the end of one pipe and the end of the other and rotate to the angle of the red line shown.
In 2014 UCS, Z rotates the UCS from some unrelated point.
In 2014 UCS then selecting the two ends rotates the UCS X-axis to the direct line between the two.
In a working scenario the end of the two pipes would be in vastly different positions. Drawing a line between them, flattening it then using UCS, E on the flattened line give the functionality I want, but is a very slow way of doing it.
there is no way of selecting 2 points for a Z-axis rotation.
TL;DR
In 2011 if I wanted to rotate the UCS around the Z-axis I would type UCS, Z then select 2 points and the UCS would rotate around the Z-axis but the X & Y axis would remain as it was. This is no longer the case in 2014, how do I do this now?
I am trrying to rotate the view that I have in my viewport. I used to use a command that had the options Alingn, rotate etc but in this moment I do not remember that command. I you do not remember either
View 6 Replies View RelatedWhen I'm into reference edit mode (REFEDIT) I can make match properties command also on objects which are not in working set - this was not possible to do before and it is pretty annoying. Is this a bug or some new function, hopefully turnable on/off?
Also I never understood, why is not possible to copy anything from reference edit mode, but it is possible to paste into, also there are no problems in Block editor mode? It seems to me like artificial set limit with no obvius explanation why would that be good especially when I see that it is possible to match properties on outside objects.
mvsetup gives this error, i want to align and rotate my object in a viewport....
The file mvsetup (.lsp/.exe./.arx) was not found in your search path. check the installation of the support files and try again.nil
I just opened up a project Sheet Set that i haven't worked on in a while, and all of my layout pages have a series of "#" in place of the fields. For example, the name of my viewport should read "Head Detail", which is the name given to that view in the Sheet Set Manager, but instead reads "##############". This also happens with my view numbers, callout bubbles, etc.
However, the information in my title block is still intact. For example, the Project Name, Client Name, Page Number, etc. all read the correct values.
I tried opening the drawings in Reference Manager, but I see no alerts or errors. I have had this happen before in previous versions going back to at least 2010, but they have always been small projects and I just recreated the views and callouts. This is a large project however, and redoing this will cost hours, if not days of extra work.
In examining the fields, it seems like the problem fields are those defined by the SheetSetPlaceholder Filed Name, and the Placeholder type is irrelevent; they are all broken. For other Field Names, for example CurrentSheetNumber, the references still work.
I have designed a pipe network in Civil 3D 2013, first I created a rule set for both structures and pipes, then I created a parts list, next I built my network.
Where more than two pipes connected to one structure, I found 'applyrules' couldn't align everything appropriately, so I had to manually amend the levels in 3D to ensure the pipes connected correctly (soffit to soffit / top invert to top invert).
My problem is that after doing all this, the surface model has been amended! I have changed the reference surface in the network properties and in the vista. The rim height of my structures seems to have been adjusted in the most part but my pipes have not.
In areas where the surface has gone down, my minimum cover is violated. Is there a way to move the pipes back down to minimum cover, without using 'applyrules', as using that command would change the gradients to the minimum, some gradients have changed during my manual adjustments.
Furthermore, where the surface model has reduced in level significantly, my pipes are now above the surface and the manhole has stayed there too.
I have a polyline path and a rhombus. I will like to array the rhombus along the polyline path. As you can see from the attached file, as the object rotates along the path, it shift off the path such that the distance between the rhombus and the path changes esp at the turn. How can I keep this distance between the rhombus object and the path constant?
View 7 Replies View RelatedIn previous versions of Civil 3D there was a grip on the point marker that allowed me to rotate the block used as a point marker, where did this grip go in 2013? How can I rotate an individual point marker without having to create a separate point style?
View 1 Replies View RelatedI want to rotate multiple drawings to a custom rotation. I have figured out how to save my custom rotation so that I can get back to it in the same drawing file, but is there a way to carry that custom rotation over to other drawing files?
View 1 Replies View Relatedhow to rotate the architectural tick of a leader line ? I don't use ACAD on a daily basis and have forgotten the command.
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I wonder is there is a quicker way to rotate your drawing in the models to organize them in the layout?
This isn't fast and convient at all to rotate your hole drawing to fit it in the landscape paper for example.
I know I've read something in the past about a new way of doing it, but can't remember.
how to get the little green rotate circle back in C3D 2012 and 2013?
When you click on a point in 2011 (at least my setup), there is a little green circle that pops up that I can click on and rotate the point around. In 2012, I have to click on the point, then right click on it, then select rotate label, only then can I rotate the thing.
C3D - 2014, Sincpac Addon
Is there a way to attach a reference file such as a pdf to an idw browser in R2013? There are many times we include torque specs, etc and it would be nice to include the catalog page or some reference to the original manufacturer specs.
View 1 Replies View Related