how to get the little green rotate circle back in C3D 2012 and 2013?
When you click on a point in 2011 (at least my setup), there is a little green circle that pops up that I can click on and rotate the point around. In 2012, I have to click on the point, then right click on it, then select rotate label, only then can I rotate the thing.
C3D - 2014, Sincpac Addon
In previous versions of Civil 3D there was a grip on the point marker that allowed me to rotate the block used as a point marker, where did this grip go in 2013? How can I rotate an individual point marker without having to create a separate point style?
View 1 Replies View RelatedIs there anyway to go back to 2012 once you've opened a file in 2013?
I would like to recover work done in 2013, at least the styles...
I've found out that I can export pipe networks to landxml and then import the file in 2012, but I have no styles if I do that...
Using Building Design Suite Ultimate 2014
2013 has a linetype called "proposed tile" and another one called "existing tile." 2012 doesn't have either. Is there any way I can could get those two files so I could load those two linetypes into 2012?
View 3 Replies View RelatedCan I open 2012 .dwg files in 2013 and have all the settings styles and all the 3D data? 2013 Civil 3D
View 3 Replies View RelatedHow to open subassembly designed in SAC 2013 in the SAC 2012 ?
Civil 3D 2012, SAC
16 GB Ram 64 Bit Win7
We previously switched from 2010 to 2012, i transferred our pipe catalog with custom pipes. I though i did it right, but when i started editing pipes that were started in 2010 the pipe sizes were automatically changing to the wrong size after edit.
We are about to upgrade from c3d 2012 to 2013, i don't want this to happen again. proper way to transfer our customized pipe catalog?
C3D 2012, SP1
Win7 - 64bit
I have install Civil 3D 2013.
In my 2012 release I added several parts into the pipe catalog. I would like to merge those 2012 parts into my new 2013 pipe catalog.
Is it possible to data shortcut a surface from c3d2013 into c3d2012?
I tryed it and it says that the surface is in the drawing but its not showing up.
I've tried changing the style and the layer but nothing works.
Any new methods for depicting flared end sections in profile views in Civil 3D 2013 or 2012? I just loaded Civil 3D 2013 last week and have been checking to see if flared end section depiction in profile views is any better than previous versions. I haven't noticed anything different. I'm I the only one wanting a easier way to depict flared end sections in profiles? In short, I have never been able to figure it out.
View 1 Replies View RelatedI have greenscreen footage, where a green screen was put on a window with tracking markers. A person is moving in front of it, so you can see the reflection. If I just key it and put a garbage mask around it, I can get rid of the green and the tracking markers, but how can i get the reflections back now? Cause if I just screen the original desaturated part back on, you can still see the tracking markers.... Is the only way to first paint over the markers and then screen it back on, or is there another way? I'm on Smoke for mac 2012.
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
How can rotate a circle 360 degree in PS CS6 in Time Line [for GIF animation]?
Transform [Rotating with Transform] is not work in Time Line? Like this, I want to rotate a rasterized circle 360 degree [like a Radar Indicator]...
I was in paperspace, clicked in the viewport to do something in model space and a compass with north south east and west showed up in the top right corner of my viewport. When I clicked on it, my x-ref rotated. How in the world do I re create this? I have no clue how I even accessed it or what command prompted this to happen.
View 4 Replies View RelatedI have a problem drawing text in a complete circle in AutoCAD (version 2012), I used "Arctext" but the letters don't seem to stay at a even space between them... it's not a very good end result :
View 9 Replies View RelatedI did it earlier, but now everytime I try "alt-click" to make the light blue cross hairs, nothing happens. I am trying to make a gear in illustrator and this is a key componant.
View 6 Replies View RelatedI want to rotate object along circle with special step angle. If i choose TRANSFORM i don't type special angle, but i can choose pivot point. I don't know how name this point, i name this pivot point, the point concerning which object rotates. And if i choose TRANSFORM OPTION i can type special angle, but i can't choose pivot point. More precisely, i don't know how do that. I choose object, then transform, set pivot and then open pivot option, type angle but object rotate around own pivot!!!
View 2 Replies View RelatedShortcut that will rotate any object 90deg and back again?
Like Ctrl+Period & Comma for rotating text.
My brush tool has become a small cross hair and cannot get back to a circle. How do I reset?
View 8 Replies View RelatedI have this heavy issue, i can't send to back a line, an object or a hatch under other lines. In 2012 i used this feature a lot but in 2013 it's not working very much, maybe 1 time out of 10 and i absolutely can't say why.
HPDRAWORDER = 1 seems to work with a new hatch.. but i can't redraw everything.
Let's say i put an entire floor plan into block then draw over it. (I don't want to start a Xref discussion please) i can't send the entire bloc to the back.I used to do that with 2012, 2008, 2007.. but it's 2013 it's not working, is there a way to correct that?
Currently I’m riding my Premiere Pro CC skateboard on “L” plates and already I’ve hit a tree and landed on my backside. I filmed a video of my daughter with my DSLR camera and shot my take vertically. No doubt this is a clear sign to all of you reading this that I am a beginner, I mean a trainee-wheels-nappies-spoon-fed beginner. When importing my vertical file it lies horizontal in this CC editor. Surely this must be some button to push to rotate my take back to vertical. Meanwhile I’ll fix myself up with some band-aides and thumb through the ABC book to the part about horizontal out-put devices.
View 3 Replies View RelatedI am using photoshop. the icon for cloning is a circle...it changes to a cross. i need to use the circle. how do i get it back
View 1 Replies View RelatedI did a search on the 2011 forum and could not find the thread on getting the old map browser back.
Is this even possible in Max 2012 Design?
Managed to revert the select by name which I like better as it is simple.
Feel the same way about the old material map browser.
These are the reasons why I went back from GIMP 2.8 to GIMP 2.6.x:
1.) The free text field in the "Open file" view has been removed, or at least I couldn't find it. A frequent use case for me is to copy a fully qualified file name (i.e. including the path) of an image and to paste it to the "open file" view of GIMP... Not possible anymore? Why? Progress IMHO is if possibilities grow, not if they disappear.
2.) I open a JPEG and I want to save(!) it as JPEG. Why is GIMP starting to domineer over the user now (like e.g. MS Windows has been doing all the time) by changing the file type to XCF and forcing the user to "export" the image (that was opened as a JPEG!) if he wants to save it as a JPEG again? Progress IMHO is if things get easier, not if they get more complicated.
3.) The calculation of the image size of JPEGs when saving in preview mode is buggy, i.e. the size is way too high (GBs instead if MBs). Of course, this is only a minor bug which will be fixed soon (if it isn't already). I just wanted to note it.
How can I change my clone stamp brush cursor from a cross back to a circle?
View 3 Replies View RelatedSee attachments. See the green linework in each plan that is skipping across the corridor. These are two different projects. I have seen this numerous times but have not found a solution or even what is causing the problem.
View 1 Replies View RelatedHow do I get rid of the green circles in cross section editor? I have looked in the code set styles, and I have found nothing that will resolve this.
View 2 Replies View RelatedI drew 2 circles with ttr command (1 and 2). The problem is when I try to trim them to remove the part I don't need, it doesn't work cause the circles 1 and 2 aren't stick with the borders as they should. At the 4 red circle points, if you zoom you'll notice they don't stick the border, never faced this problem before (usually I cut the part I don't need without problem). I've done regen/all but doesn't seem to fix that problem.
View 9 Replies View Relatedwhy when I rotate the mtext to be isometric in this drawing, the multiple lines become offset.
I created the mtext orthagonally like normal and used the rotate command 30 or -30 angles. Is there some other type of isometric rotate or something.
When i insert an OLE i want to rotate it from vertical to horizontal, but the rotate button just moved the full image around a point.
View 4 Replies View RelatedThis week I upgraded from 2011 to 2014 and have noticed a major change in rotating the UCS around only the Z-axis.
Looking at the attached image (the blue box is just to represent the relationship between the pipes):
I want to, as a simple example, rotate the UCS around the Z-axis from the end of one pipe to the end of the other.
In 2011 UCS, Z would allow me to select the end of one pipe and the end of the other and rotate to the angle of the red line shown.
In 2014 UCS, Z rotates the UCS from some unrelated point.
In 2014 UCS then selecting the two ends rotates the UCS X-axis to the direct line between the two.
In a working scenario the end of the two pipes would be in vastly different positions. Drawing a line between them, flattening it then using UCS, E on the flattened line give the functionality I want, but is a very slow way of doing it.
there is no way of selecting 2 points for a Z-axis rotation.
TL;DR
In 2011 if I wanted to rotate the UCS around the Z-axis I would type UCS, Z then select 2 points and the UCS would rotate around the Z-axis but the X & Y axis would remain as it was. This is no longer the case in 2014, how do I do this now?
I am trrying to rotate the view that I have in my viewport. I used to use a command that had the options Alingn, rotate etc but in this moment I do not remember that command. I you do not remember either
View 6 Replies View Related