Is it possible to data shortcut a surface from c3d2013 into c3d2012?
I tryed it and it says that the surface is in the drawing but its not showing up.
I've tried changing the style and the layer but nothing works.
I have a existing ground surface drefed into a model and am trying to get a user defined contour at a set elevation but nothing appears. I have userdefined layer on in the surface style and other ideas why it will not appear?
[URL] ......
I want to be able to repath a data shortcut I have on my drawing to a file thats on my C: drive, how do I do this? Its just for this one drawing I want to do it with, so the Data Shortcuts Editor is no good to me.
View 4 Replies View RelatedHow can I locate the Data Shortcuts Working folder? A surface exist as a data shortcut in a dwg, but the location of the data shortcut folder is unknown and therefore cannot be set in the Prospector.
C3D 2011 (latest updates)
Win 7 Pro, 64-bit
16 GB RAM
I have run into a problem with my Pipe Network data shortcut. When I am in a drawing that is referencing my Pipe Network not all of my structures are showing up. I confirmed this by going to the prospector tab/pipe networks/storm/structures. According to the list It is obvious that not all of my network structures are making it to the new drawing. I've double and triple checked the source drawing to make sure that all the structures actually exist and they do.
I've deleted the data shortcut and recreated it and still nothing.
Is there currently any workaround to bring in alignment descriptions when data short cutting? I have hundreds of lines that are in my drawing that need callouts and this is easily done by making a label with reference text to the alignment description.
View 1 Replies View Relatedhow to make a data shortcut to a pressure network? Is this feature even available? It seems odd that this feature would be left out of C3D 2013 when it is critical to plan production.
View 1 Replies View RelatedI have a 2011 Civil3D drawing with Data shortcuts in it. I need to replace the source drawing path of the data shortcut with another path. Is there a way to change this either manually or, preferably, programically. At some point we'll need to batch through the drawings and change this path information. Is this information is stored in a drawing dictionary somewhere? If so, where? If not, where?
Updating the .XML data files doesn't appear to affect data links already in the drawing.
I am having an issue with alignments not updating to the latest source drawing. Initially, the alignment source drawing was in File1.dwg. Due to a design change, a few of the alignments were revised in a new File2.dwg. For the first time ever, I used the Data Shortcuts Editor program to repoint the data shortcuts to the new File2 location. By all accounts, it looks like the data shortcut were updated to the new source drawing (File2).
The problem is in some files some of the alignments still source to the File1 location and even when manually synchronizing it still sources from File1. Additionally, it seems random in terms of which alignment and files source to File2, even to the point in some files one alignment will update to File2 and other won't and some alignments will update in some files but not all. Note that I am not the original creator of the files so I don't know much history on the files (no alignments seem promoted however).
What’s the best way for me to get all the alignments to point to the new data shortcut source drawing location?
How do you move a survey database and data shortcuts? Without going into details, sometimes it is necessary to copy portion of projects as new projects. The survey database along with the drawings our surface, points, linework, etc. need to reference the new directory. I can set the survey database folder location to the new path but am not certain the information in the dwg is point to the correct location.
The same essentially applies to the data shortcuts. I'm having trouble getting this to work. With LD we were able to copy the project and resuscitate the drawing(s). I tried to use Data Shortcut Editor with the Saveas. I then attempted to rename the dwg's and path the new location and name but receive an error of Invalid source file. Correct the path or press Esc..
For a roadway project I am creating alignment detail sheets. For the first project, only a portion of the final road is being constructed. I have the proposed alignment brought in with data shortcuts and will use various styles for the labeling. But I only need a few different sections of this alignment to be shown. Is there a way I can set clip boundaries or mask out the sections I don't want to show?
View 1 Replies View RelatedOccasionally I get the following message when trying to add data shortcuts.
"The drawing has not been saved yet, please save the drawing before creating data shortcuts" Only I have saved, this still occurs after either a full or quick save.
Shutdown Civil and reopen still gives the same message..The problem seems to be when you are saving to any other version of Autocad than R2010. Save as R2010 and it works.Mike Evans
Civil3D 2013 / 2014 British UK
Windows 7 Professional 64-bit
Intel(R) Core(TM) i7-3820 CPU @ 3.60GHz (8 CPUs), ~4.0GHz With 32768MB RAM, AMD FirePro V4900, Dedicated Memory: 984 MB, Shared Memory: 814 MB
I'm trying to find out what could be the cause of sturcture styles in a Pipe Network Design Drawing resetting to default styles when I Data Shortcut the design into my Sheet? (I.e. I've got gate valves, fh's, and plugs in my design file, but when I data shortcut them into my sheet they are all come in as null structures) Not Cool!
I'm using the same template that contains all the same parts/styles for both design and sheet.
I have a data shortcut file where i keep my EG surface that now has File Name.dwg [DS] [DS] [DS] [DS]. What's the deal? Has this managed to morph itself into something it's not. It used to have only one, had two for awhile, and now 4 references to the DS (Datashort cut project folder).
Have I done something wrong here to get these wonky file names, would be nice to see just 1 reference being made to my DS Project folder.
I made a pipe network in one drawing, d-reffed it to another, drew parts in profile.
Then I realised that I needed to show the outside walls of some pipes in profile. We don't normally display them. And I found that the wall thickness was wrong. I eventually figured out how to edit the wall thickness, and I have it working right in the source drawing. (I had to swap parts to get it to update.) But the host drawing is not updating.
So if I go to pipe properties in the source drawing, it gives a wall thickness of 165mm (correct). If I go to the same pipe in the host drawing, and go the the pipe properties, the wall thickness is 75mm (wrong).
how to trigger an update? I've swapped parts back and forth to different sizes, synchronized, SetNetworkCatalog and done PartCatalogRegen in both drawings.
For background, read Edit wall thickness.
Civil 3D 2011, 32 bit
Win 7 Pro, 32 bit; Intel Core i5 @ 2.80GHz; 4GB RAM
I am doing bulk earthworks with C3D 2013 and quite often I am modeling large dam walls with multiple raises, core sections, filter layers, etc so I end up with up to 50 surface models in one drawing. The process I follow involves modeling each raise of the wall by targeting an elevation 10 metres or so below NSL. I then use a volume surface to give me the intersecting boundary between the topography surface and the wall raise surface. I repeat this process for each raise/core/filter section - create volume surface to find intersection, extract boundary of intersecting volume surface, add boundary to wall raise surface, put both on a unique layer calculate volume - repeat for next wall raise - ad nauseum.
To speed things up a previous draftsperson created a shortcut button on the ribbon that does the volume surface trick with one click so all i need to do is hit the button, select topo, select wall raise and it gives me the volume surface between the two, all i need to do is extract the border and add it as an outer boundary to the wall raise. I would like to take this to the next level if possible and this is where I an stuck.
If my drawing consisted of a topography surface and "X" number of wall raise surfaces all named in a uniform fashion ascending numerically or alphabetically would it be possible to write a routine/shortcut button that did the following;
1.) Create a volume surface between topo & wall surface 1 - extract border as polyline - add polyline as outer boundary to wall surface 1 - move both wall surface 1 and newly created boundary polyline to unique layer.
2.) Repeat process for topo and wall surface 2
3.) Repeat process for topo and wall surface 3
.....and so on until all wall surfaces have had volume surfaces created between them and the topo?
I've got a drawing that has a data referenced pipe network (C3D2014). Everytime the pipe network is syncronized the pipes and structures change their styles back to what I can only assume to be their default. I can not find where to change this style or behavior.
View 9 Replies View RelatedI do a lot of hydraulic modeling and create river bed surface datafrom surveyed points. I need to be able to transfer the surface data from Civil3D to GIS effectively. The issue is that GIS does not maintain the fidelity of my surface based on the breaklines I've drawn. It triangulates based on vertices and often triangulates through the feature lines. In LDD, I was able to do address this by adding vertices to my 3D polylines in a batch-type function. That is, I could select all of my 3D polylines and add vertices to them at the same time. In Civil3D, I have to add vertices to each feature line individually.
Any way to add vertices to feature lines, or to a surface, in a more efficient manner that maintains fidelity of surface data in the transfer from Civil3D to GIS?
I am learning to use surfaces in drawing, My main aim is for volumisation tasks. I had been following a tutorial that relied on creting surfaces. i.e
1) from the home tab> Surfaces> Create Surface
2)Add data. From Modify Tab>Surface> Add Data> Point Files.
This worked for me to start with but after changing some settings (looking to display a missing toolbar, I clicked or unticked one or two boxes, Not sure where, I know silly!). The only options I have in the drop down from "add data" are: Boundaries and DEM files. All other options in the list are not clickable.
What setting I need to change or perhaps restore all settings to default. Any comments on volumisation (spoil heps, Data is x,y,Z from survey equipment.
I have created a data shortcut to a surface using Civil3D 2011. When I create a reference to it in another drawing, it shows up in the Prospector but nothing shows up on the screen. I have played with the surface style and made sure all the layers were on and tried closing and reopening the drawing.
I have also tried to reference it into a brand new blank drawing and I even tried to reference a surface in a different file that I have referenced several times before (in 2010). Every time I get the same results. It seems like the surface is there, but I just can't see it.
I have a surface made up of gradings and feature line that I had to come back to and edit. I picked the surface and selected go to source file and when I got there one of my infill's has gone missing and the surface has a big hole in it. The weirdness is the sheet file that refs it does not have the hole. What is that all about.
P.S. Editing a surface built up like a Rube Goldberg contraption is no fun at all. Glad my best practices are coming along since
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
I am working in Civils 3D 2014 and I have a survey with points already on the correct elevation layer, I have tried creating a surface from this but it does not show up.
My process:
- I create a new drawing and insert a block (my topo survey) and click explode when I do this
- I create the surface by TIN and make sure I have the correct layer for the points that I am selecting
- Click ok
- Then go into that surface and turn on all layers and refresh - still nothing
- I also made sure that my surface style was 1m contours so I would definately see this.
I have created a contour layer in MAP and need to bring the data into Civil (to create and EGL surface) which I usually I do via an alter properties query.
There is the Create Surface from GIS data in 2014 but this requires shp files so the two questions I have are:
Can the contour layer be output as shp files (and if so how)?
If yes, is this easier/more efficient than my current workflow?
(No connection with Autodesk other than using the products in the real world)
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
I am using AC3D 2014. I have created a surface from downloaded DEM points, but, as expected, the contours are not as accurate as I would like. They vary from known elevations anywhere from a few inches to several feet.
I also have survey data from approximately 500 points which include Northings, Eastings and Elevations. Is there a way to add these points to my existing contour surface and incorporate these know NEZ points such that he contour surface is more accurate?
I have already converted my "known point" file to a .txt format with comma delimited information.
I'm working on a topo survey and the contours are crossing each others (See attached pic) and what I did was edit the surface by adding points. I know that these points are fake, but how does this affect the terrain surface for design point of view? I did try swapping edge and deleting lines but makes it worse. Also as you can see in the pic, I don't see the added points like it did back C3D 2008.
View 5 Replies View RelatedI have a 1 mile road topo coming up for design purposes. The curb is standard, but there is full curb & depressed curb. If you had your way from the CAD seat, what shots do you prefer?
Most accurate I've seen iis Centerline, Edge Pavement/Edge Concrete Gutter, Flowline Gutter, Face Curb, Back Curb. More fieldwork, but made a good product.
What I have seen is CL, EP, BC, then "let them just use a template" and several variations thereof.
I have never seen a good way to automatically offset from say BC only and handle depressed curb by field coding.
I have a Surface that is data referenced into many different drawings. On one of the drawings, the reference will not show contours until I sync. It will show the boundary. Just one of them...but I can't use sheet set manager to publish drawings since I have to open it up and sync. Is there a setting we changed? The styles are all the same. The surface is on C-Surface, the boundary is on C-Surface, the Contours are on C-Surface-MJR, C-Surface-MNR.
View 2 Replies View RelatedJust trying to clean up a surface. I can swap edges fine. This project was a 2009 project.
View 1 Replies View Relatedheres the problem we had created a slope style in 2012 15% - 25% and 25% - 100%. done this many times with no problems. so we upgrade and open the file in 2014 now there is a large white area that c3d is filling in.
Win 7 pro 12gb
NVIDIA Quadro 2000
LDD 2009
IDS 2014
I have checked my data folder and I cannot find the file Surface-7.dwg used in a surfaces tutorial. It's a multi-view block. I checked my entire hard drive and it is not there. Can the files be downloaded? I can't seem to find where I can do this.
As a matter of fact, the location where the tutuorials say to look, Windows 7: C:ProgramDataAutodesk AutoCAD Civil 3D2012enuData, does not exist on this Windows 7 Home Premium computer I am using.
Windows 7 x 64
Nvidia GeForce GTS 450
8 GB Ram
Intel Core i5-2310 @ 2.90 GHz
v. F.107.0.0 AutoCAD Civil 3D 2012 SP1
I have a rather large project for a roadway reconstruction. Therefore, the existing utilities are in a separate drawing and the existing ground surface model is in a separate drawing. All the above surface items (curb and gutter, asphalt, concrete, signs, sidewalks, landscaping, etc..) are in the master drawing. I then xref'd in my utility drawing and though I would use data shortcuts for my existing ground surface drawing. I took the surveyed triangles (3d faces) from our raw survey drawing and copied them into my surface drawing, created a surface from the triangles, created a boundary and such. So far everything is good. I created the working folder for the data shortcuts for this project and saved the drawing and closed it. I went into my master drawing and clicked on "Create Reference". I did not promote. The reference came though and everything is fine. Now I want to add contour labels in my surface drawing which I did but they do not show up in my master drawing but the contours themselves do. Do I have to promote this drawing into my master drawing so I can create the contour labels in my master drawing? I guess that is fine but the issue is we have small areas of topo that will be added as needed down the road. If I promote the surface drawing into my master drawing then when I add topo to the surface drawing, it wont update in my master drawing.
View 9 Replies View Related