heres the problem we had created a slope style in 2012 15% - 25% and 25% - 100%. done this many times with no problems. so we upgrade and open the file in 2014 now there is a large white area that c3d is filling in.
Win 7 pro 12gb
NVIDIA Quadro 2000
LDD 2009
IDS 2014
We just recieved 2014 C3D upgrade from 2012. I opened a 2012 dwg and saved in the 2013 file format. now when i attempt to open the drawing in 2014, C3D freezes while loading the drawing. It can't seem to get past "reading triangles from file". Weird thing is i can open a copy of the original 2012 DWG and work for minutes or hours in 2014 saving many times along the way and if i close the DWG and attemp to re-open, it freezes up everytime. I have done this same procedure with other DWG's and don't have any issues.
C3D 2014
Intel Xeon 3.07 GHz
15 GB Ram
Win 7-64 bit
I'm having an issue with my cad files that were done with Civil 3D 2012. When we made the jump to Civil 3D 2014 all my drawings seem to be corrupt. Now I have pipe networks in my base file. I have tired recovering and recoverall but no luck. I can send the CAD file.
View 1 Replies View RelatedIn previous versions when you hovered over an invisible axis in the browser you could see the whole line in the model. Now you just get the end points displaying as yellow circles and it can be quite difficult to see where the line is. What's the point of this change? Is there a way to get the old behaviour back?
View 1 Replies View RelatedI just started work in Civil 3D 2014 and was going about creating different point groups for some volume calculations so I could create different surfaces. I noticed after creating my first point group that the NO DISPLAY group could not been seen in the Prospector under Point Group. Now in previous editions there has always been a NO Display Group so you can easily view your different groups. Is this something they changed in Civil 3D 2014 or was the installations faulty?
View 7 Replies View RelatedGetting bizarre display in the Section Editor of the 3D Polylines that are in the drawing. The green line is the EG ground section.
In 2013, this same drawing displays normal, we don't see the 3D polylines in the Section Editor.
C3D 2014 SP1
W7x64; i7 8gb; Radeon HD 5700
Is there any way to change the referenced surface on a Surface Elevation Label. I can see the surface in the properties but cannot change it.
C3D 2011
We have recently upgrading from 2012 to 2014. Several of our jobs are not reading the surface when we open the drawing. We have to force the sync of the surface and then the grades display.
AutoCAD Civil 3D 2014
HP Z620 Workstation 64-bit
Duel Intel Xeon E5-2620 @ 2.00 GHz
Ram: 48 GB
We have a pipe part list that we have based of our own catolgue and it work fined in our template in 2012 and how we have upgraded to 2014 part of the list does not appear in the drop down selector see the screen capture attached? and figured out what caused it.
View 1 Replies View RelatedI have a couple of questions regarding surface volumes/analysis in Civil 3D 2014. First, there used to be a way to determine the volume between two surfaces without creating a volume surface. The command is _AeccReportSurfaceVolume, but I can't find it on the ribbons in 2014 to save my life. Do I need to create a new button myself?
Second, and more important, dealing with the elevation analysis in 2014, and noticed that the colors reset anytime that the volume surface is rebuilt? It has always been annoying not to save a color scheme, but at least once you had set it up, the colors stayed as the surface changed. Is there a new setting that I am missing, or is this just a glitch with 2014?
I have a surface profile which has 2 surfaces in it. The surfaces overlap, and where there is overlap I just want to show one surface. Right now it looks like I'm going to have to smack a new boundary on the one surface to clip it, but I thought there might be a way to limit the display range of one surface in the profile.
Right now, I've only figured out how to do this so both surfaces are limited to the same range, but I can't figure out how to do it if you want to just control the range displayed of one surface and show all of the other surface.
I have a project I designed and grading plan is almost done. My proposed surface lables read as 1256.50. How can I get them to read just 56.50? I have a FG surface I created and am labeling using surface elevations. I am running out of room and need to free up some space. I don't want do drop my surface 1200'.
View 3 Replies View RelatedJust trying to clean up a surface. I can swap edges fine. This project was a 2009 project.
View 1 Replies View RelatedIs it possible to data shortcut a surface from c3d2013 into c3d2012?
I tryed it and it says that the surface is in the drawing but its not showing up.
I've tried changing the style and the layer but nothing works.
Is it possible to weed contour lines displayed in a surface based on the slope? I am having an issue plotting construction plans due to steep cut slopes and flat adjacent areas. I have several cuts ranging from 33%-50% adjacent to flat areas around 1%. Due to the drawing scale required by the client and the .2FT and 1FT contours required to detail the flat areas, my steep cuts appear as dark hatches due to the tight contour lines.
View 1 Replies View RelatedI am looking for either a corridor style or surface style to display slopes while in plan view while working on a corridor. I know you can turn on slope arrows as a surface style, but I am actually looking for the grade to be displayed next to a slope arrow. Hopefully I am explaining it properly.
I just am looking for a better way to spot errors before putting surfaces into machine control without checking station by station in the section editor.
Since Action recorder does not work with the surface style display box, is there any way
to automate the toggle of points and triangles display ?
I dont see any command lines that can change the light bulb status?
using c3d 2012
After adding 9 or so breaklines, the display of my surface (e.g. contours) disappears when I add the next breakline. Based on the surface elevation shown at the pointer location, the breakline seems to have been added and the surface rebuilt.
View 3 Replies View Related4 days ago, I installed the 2012 Update 2.1.
Prior to that, the linetype as seen in the attached screen short displayed the same for both the alignment style (green) and the polyline (white). After 2.1, they display at different scales. Why? There now seems to be a problem with linetype scaling in the style definitions.
The same linetype is used in the alignment style as is assigned to the polyline. The scale is the same for both (in the alignment style definition and as assigned to the polyline).
The only thing that changed is that on Friday morning, I installed the update 2.1 and this is what things looked like in existing model files when I opened them that displayed correctly when I went home on Thursday. Open this file on my computer and it displays according to the attached screen shot. Open the exact same file on another team member's computer and they display at the same scale.
I am grading a parking lot and trying to highlight areas with less than 1% slope.
I can't find the spot to set user slope ranges in the setting tab.
I can find setting number of ranges with three options of minimal use.
This used to be so simple in LDD.
The examples I have seen for this function all show odd ranges of limited value.
I want to color cut/fill using red/greens schemes.
I want to use "interval with datum" method, and 2' intervals.
That gives like 20 rows for cut and fill, and so c3d applies one red to 5 rows, then next red to another 5, and so on.
I could pick colors by hand, but that dumb dialog is so slow, and its not easy to visually pick a nice gradation.
Is there no way to say "step from this color to that"?
Even when I do get all set up, I am finding performance of displaying the 2d solids takes forever.
I obviously have a large surface, but that is why we pay for good software right?
I am on c3d 2012 on a fast 64 bit win 7 machine. [URL]
C3D 2012 SP3 on Win 7 Pro:
I have an alignment with horizontal PVI points that are coincidental with COGO points. I want to display in a profile view, a surface elevation at the alignment PVI points in a band style. Is it possible to do this? If so, how?
If I had some custom lisp routes that I used with ACAD 2009, then 2012...do you think I would need to upgrade, modify or change any of the lisp to work correctly in 2014?
Could a custom lisp that I used in 2012, corrupt, effect performance, screw with other key commands (although with worked in the 2012 software) in 2014 if I didn't upgrade the 2012 lisp?
Civil 3D data shortcuts.
So I first created a drawing which included a surface called "CONTOURS" and an existing sewer pipe network. I then created a data shortcut of the existing sewer network and started a new drawing with a proposed sewer pipe network.
When I received better contour data, I created a new "10FT EXIST CONTOURS" surface in the existing sewer drawing and switched the reference surface for the existing sewer structures and pipes to the new "10FT EXIST CONTOURS" surface. And of course I deleted the old "CONTOURS" surface because I no longer needed it.
Now, the part that makes me want to pull all my hair out! When I open the proposed sewer drawing I get all the error messages that "Reference surface 'CONTOURS' not found in reference drawing" for all 22 of the existing sewer structures.
I've tried deleted the existing sewer network in the proposed sewer drawing and recreating the data shortcut but nothing makes the errors go away. Is there any other way the existing sewer structures could be referencing the deleted surface that I have not thought about? How to get the error messages to clear?
I want to change the reference surface for a pipe network with existing pipes and structures. however the changes will only affect new objects, I have to manually change the others one by one. Even with the vista open I can select multiple structures, but when I click in the reference surface column of one of the selected structures, all the others are deselected.
View 6 Replies View RelatedI can only change the layer color.
But I can't change the cross simbol, its drwaing scale.
Also cant view the point number,....
Maybe I cant view or set these properties when points were added using "Point Files" option.??
Civil 3D (2013)
Is there any way to change the format of Lat/Long in a C3D point list display from degrees, minutes, seconds to decimal degrees? I have looked pretty hard, but can't find anything. The geodetic calculator only does one item at a time, I think. Any plug-ins out there? I suppose this could be on a wish list as well.
I am using R2012.and have ended up manipulating point values in Excel-not a quick way of going about it.
I recently installed my 2014 and cant switch back to the normal display and get this instead.
see the ghostly back parts?
how to go back to normal?
I am running ACAD 2012 & Civil3d 2012 and would like to install ACAD 2014 to start playing around with the software. Are there issues with running both versions on the same computer?
View 3 Replies View RelatedI have a file with several Space Styles. As I progress on the drawings I would like to modify some of the display properties, primarily color of the fill. I would think I could set the overall appearance of each Space Style in one location and then adjust elements of various display representations. In my case have a red hatch for a space style but in one display rep it would be solid and in another it would be a diagonal hatch.
As I see it, if I wish to modify the color I have to go into each display rep and adjust the color of the base hatch and click on the Style Override check box. It seems like duplicative work. Is there another method of setting the color of each Space Style so that it shows the same in all display reps?
I just loaded 2014 onto a new computer and poof every custom toolbar has a question mark. Yet the image displays on the preview in the cui.
All of my button images are in a folder on my C: drive and that path is in the support file search path.
I went to one of the buttons and click on the small and large image and browsed to the folder with the BMP files and clicked it for both small and large.. And when I clicked 'ok' everything started to display correctly.
Custom Build with Win7 Pro 64Bit SP1
Gigabyte Tecohnology Co. X79-UD3
3.60 gigahertz Intel Core i7-3820
16GB GSkill Ripjaw Z PC3 2133 PC17000
PCI-E ATI FirePro V7800 2GB 256bit
ATA SanDisk SDSSDX24 SCSI Disk Device (256 GB)
Dell 2001FP and (2) 2407WFPHC Triple monitor setup