AutoCAD Civil 3D :: Clipping Surface Profile Display
May 28, 2013
I have a surface profile which has 2 surfaces in it. The surfaces overlap, and where there is overlap I just want to show one surface. Right now it looks like I'm going to have to smack a new boundary on the one surface to clip it, but I thought there might be a way to limit the display range of one surface in the profile.
Right now, I've only figured out how to do this so both surfaces are limited to the same range, but I can't figure out how to do it if you want to just control the range displayed of one surface and show all of the other surface.
View 4 Replies
ADVERTISEMENT
Mar 14, 2013
Im creating a Profile Bandset and would like to have multiple surface/profile elevations shown, ie: EG, FG, Back of Curb and Back of walk. While creating this bandset I see that the text component editor properties only has code for profile 1 elevation and profile 2 elevation in the properties area, which the code for this looks like below.
<[Profile1 Elevation(Uft|P2|RN|Sn|OF|AP)]>
<[Profile2 Elevation(Uft|P3|RN|AP|Sn|OF)]>
Ive tried to write my own code using the profile 2 as an example but it doesnt seem to work as a 3rd surface/profile and only seems to mimic the profile 2 elevation when placed in the band
My questions are as follows
1) does Civil 3d only allow 2 surface elevations in any band set? if it does allow more profiles/surface elevations what am i missing to create it?
2) if Civil 3d does alow for multiple surfaces to be shown in the band set how do i get the text component editor to supply the extra profile elevation codes? or would i need to create from scratch
3) if i need to write the code from scratch does any listing of the codes and meanings of each code ie what does RN, Uft, Sn and so forth do and mean .
View 3 Replies
View Related
Jun 17, 2013
I have a profile showing proposed storm sewer, existing sanitary, rock surface, existing surface, and proposed profile. Today for some reason the proposed profile and labels, and the existing surface are not showing on the profile and I'm not sure what has changed or how to get them back.
View 3 Replies
View Related
Mar 17, 2011
We have an engineer who is taking an existing surface and wants to show a proposed road 2" higher than existing.
I told him to simply adjust his assembly for his corridor to account for the 2" difference, but the County agency needs to see a profile.
My questions:
1) Is there a way to easily copy a profile made from a surface and "convert" it to a proposed profile? If we copy and explode, it turns into hundreds (thousands?) of tiny pline segments and it would be a mess to convert all those to a profile 1 by 1. If we make the corridor, and choose "profile from corridor", we do not have an option that could be used to represent the centerline.
2) Other than loss of dynamic updating), would it make sense to adjust the assembly so the top surface would be accurate, then copy the profile, explode the copy to a block and simply shift that (as essentially basic linework)?
View 9 Replies
View Related
Nov 28, 2012
Attached are survey points that created the surface of a road embankment portion that caved-in. The road is very near a reservoir shoreline.
1. How can a surface profile be produce? I/'ve use line to change it into an alignement and then create a proile , then a profile view. But the the surface profile is missing.
2.the points having higher elevation are the top edge( road level) of the cave-n . A few few shots were take before the shorline elevations.
3. What the best way to come up with the rock volume to fill the cave-in given this surveying points., Also the shoreline elevation will be lowered some more while work is being done since the fill is not allowed to fall in the reservoir.
View 2 Replies
View Related
Apr 19, 2013
I've been downloading whole tiles from OSIP for lidar surfaces. I've been using the grid files, and they work great. But, I don't really need an entire tile while working in my drawing, and I'd like to clip just my area of interest out of the tile. What is the fastest way to do this? These whole tiles are data hogs, and I fear they are slowing me down.
I used to have a computer at my old job that wouldn't slow at all using this stuff, so I haven't had a reason to learn how to do this until now when i'm forced to work on a laptop.
View 9 Replies
View Related
Mar 8, 2012
I have a centerline alignment defined from a polyline that starts at the middle of an existing T-intersection and starts with Sta 1+00.
When I draw the existing profile using this alignment I want it to show starting from Sta 0+50, while the plan view maintains a visible centerline starting at 1+00. I can get the grid to display the 'previous' 50 feet easily enough, but not the existing surface line(s).
Is this possible?
Windows 7-64
8GB RAM
AutoCAD Civil 3D 2013
View 2 Replies
View Related
Jun 3, 2013
I have a couple of questions regarding surface volumes/analysis in Civil 3D 2014. First, there used to be a way to determine the volume between two surfaces without creating a volume surface. The command is _AeccReportSurfaceVolume, but I can't find it on the ribbons in 2014 to save my life. Do I need to create a new button myself?
Second, and more important, dealing with the elevation analysis in 2014, and noticed that the colors reset anytime that the volume surface is rebuilt? It has always been annoying not to save a color scheme, but at least once you had set it up, the colors stayed as the surface changed. Is there a new setting that I am missing, or is this just a glitch with 2014?
View 8 Replies
View Related
Aug 14, 2013
I have alignments that go in and out of a surface boundary (this is because I have a surface that represents the bottom of pavement.) I want to show the surface profile with the gaps in the profile view (where there is no surface. However in the profile view the gaps are sometimes connected with a straight line instead of being blank.
How can I have a surface profile represent the bottom of pavement properly? (An alignment that is not fully withing the surface boundary.) I know I could add the profile multiple time with different start/end stations But, I don't want that, I want it to be dynamic, as the alignment will change.
View 3 Replies
View Related
Jan 23, 2013
I have the profile of my pressure network and storm crossings converted into ellipses but I can't get my surface to show on the profile to show the amount of cover I have between the existing ground and top of pipe.
View 1 Replies
View Related
Apr 19, 2013
I've got a weird problem with pipes in 2014. When I edit a pipe (right-click Pipe Properties) and make a change, when I press OK or Apply, the pipe SIZE changes? It's still listed as a 300mm PVC, but it's being represented as a 410mm? Look at the attached image. The storm (green) shoes a 300mm pipe and 375. The 375 is smaller? The pipe style (as you can see int he image, is set to display the inside pipe walls.
Nothing is unique here about the pipe sizes, this is a stock pipe catalog. But the size doesn't really change, only how the pipe is drawn in the profile. I've never seen something like this before. It measures .418m instead of .3m.
View 3 Replies
View Related
Dec 10, 2012
How do I revise the profile stationing from 100+00 to display 100.
Also is it possible to remove the beginning and end stations in the profile view
I have attached an example.
View 4 Replies
View Related
Oct 30, 2012
I have a project I designed and grading plan is almost done. My proposed surface lables read as 1256.50. How can I get them to read just 56.50? I have a FG surface I created and am labeling using surface elevations. I am running out of room and need to free up some space. I don't want do drop my surface 1200'.
View 3 Replies
View Related
Sep 9, 2013
Civil 3d 2014.... I have existing surface and a profile with 5 sample lines. All of them are good except 1 sample offset. I can do I quick profile and the profile looks like it should but if I generate an actual profile 90% of the profile is off. I have already tried reoding the alignment but it looks same on either one.
View 2 Replies
View Related
Oct 18, 2012
How to rename the existing profile “profile from surface”? On the right click there is no such option!
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 2 Replies
View Related
Apr 10, 2013
I have a profile with an eg surface and a fg surface made from design tool. Now I want to import a proposed surface in there too.
View 4 Replies
View Related
Jul 3, 2012
I Created a profile from existing surface and created a layer called "PRO-EXISTING" and set linetype to "HIDDEN". I also set my standard style to display linetype "BYLAYER" but my dashes are not even like polylines when plinegen is "ON"
View 4 Replies
View Related
Sep 17, 2012
i need to transition from a proposed to a future linetype part of the way down my profile. It's the same surface, just that @ station XX+XX.XX it becomes future. I need it a diff linetype to faded back, for example. Is there a way to do that? I'm thinking my only option is two create two surfaces, one propsed and one future. My situiation currently is that I already have one complete surface and would like to know if it's possible.
View 9 Replies
View Related
Dec 9, 2013
I have a drawing with surface profiles and the linetype generation is working on some and not the others. They're all dynamic and they're not dref'd in and like I said, a few with the same style look correct and a few are incorrect.
C3D 2012
View 1 Replies
View Related
Jun 15, 2012
I have modeled a storage pond on my site and I have the existing surface hidden for the extent of the pond.
Is there a way to make that hidden existing surface, show up on the profile view?
I have attached images to better explain myself.
I am working in C3D 2012.
View 1 Replies
View Related
Aug 10, 2012
A way to associate a default profile style with a surface. In other words, I would like to set a different default profile style for each surface. Same could be true for sections.
View 6 Replies
View Related
Aug 27, 2012
I have a drawing with multiple profiles. We originally had an existing and finished ground surface in the drawing, but decided to use a data shortcut to the surfaces as the design kept changing. We deleted the old surfaces from the drawing, and created the data references, using the same surface names for the new referenced surfaces.
The ground lines show up in the profile, but I can't get it to show the linetype I need for the EG surface (dashed). It doesn't act like a typical profile line - it now shows a lot of PVI points, and plinegen settings have no effect.
View 1 Replies
View Related
Apr 9, 2012
Every time I created surface profile, offset profile and sections it always at ZERO (0) LAYER. All label, grid, etc always at 0 layer. What is the correct way of doing it to assign at the proper layer?
View 5 Replies
View Related
Apr 30, 2013
How I have come to this question is through the process of trying to realistically show a hydrant in profile view. First off it it possible to create a completely vertical pipe in C3D? Also if you can, is it possible to show that in profile view? Basically, what I am trying to avoid is representing a fire hydrant pipe by creating some sort of custom cyclinder part in partbuilder. I have done this, but do not like the results.
Civil 3D 2013 SP2 | Win 7 64-bit SP1
Intel Core i5-2500 @ 3.30GHz, 8GB Ram | ATI Radeon HD 5450
View 3 Replies
View Related
Sep 17, 2013
I have drawn in essentially a sewer pressure pipe (using gravity part network because I don't have time to setup the other) and I am using PVC pipe and null structures at the joints. I created the pipe network from a feature line with verticies at the grade breaks and every 10'. As you can see in the picture the pipes are lining up but I have these straggling lines on the profile.
View 2 Replies
View Related
Jan 8, 2014
I can create labels to display stationing in a profile, but is there a way to display the coordinates in the profile instead? When I need to move my pipes I am using the station I get from the profile label and then use grip move. If I could get the N, E, I could just type it in on the Vista table.
AutoCAD Civil 3D 2012 SP4
Windows 7 (64)
View 4 Replies
View Related
Jul 24, 2012
Is it possible to weed contour lines displayed in a surface based on the slope? I am having an issue plotting construction plans due to steep cut slopes and flat adjacent areas. I have several cuts ranging from 33%-50% adjacent to flat areas around 1%. Due to the drawing scale required by the client and the .2FT and 1FT contours required to detail the flat areas, my steep cuts appear as dark hatches due to the tight contour lines.
View 1 Replies
View Related
Jun 6, 2013
I am looking for either a corridor style or surface style to display slopes while in plan view while working on a corridor. I know you can turn on slope arrows as a surface style, but I am actually looking for the grade to be displayed next to a slope arrow. Hopefully I am explaining it properly.
I just am looking for a better way to spot errors before putting surfaces into machine control without checking station by station in the section editor.
View 4 Replies
View Related
Dec 5, 2013
Since Action recorder does not work with the surface style display box, is there any way
to automate the toggle of points and triangles display ?
I dont see any command lines that can change the light bulb status?
using c3d 2012
View 4 Replies
View Related
Jan 2, 2014
heres the problem we had created a slope style in 2012 15% - 25% and 25% - 100%. done this many times with no problems. so we upgrade and open the file in 2014 now there is a large white area that c3d is filling in.
Win 7 pro 12gb
NVIDIA Quadro 2000
LDD 2009
IDS 2014
View 3 Replies
View Related
Sep 24, 2013
After adding 9 or so breaklines, the display of my surface (e.g. contours) disappears when I add the next breakline. Based on the surface elevation shown at the pointer location, the breakline seems to have been added and the surface rebuilt.
View 3 Replies
View Related
