AutoCAD Civil 3D :: 2014 - Point Group (NO DISPLAY) Does Not Appear To Be Included
Dec 20, 2013
I just started work in Civil 3D 2014 and was going about creating different point groups for some volume calculations so I could create different surfaces. I noticed after creating my first point group that the NO DISPLAY group could not been seen in the Prospector under Point Group. Now in previous editions there has always been a NO Display Group so you can easily view your different groups. Is this something they changed in Civil 3D 2014 or was the installations faulty?
View 7 Replies
ADVERTISEMENT
Jan 9, 2014
I'm preparing for our office wide install of Infrastructure Design Suite 2014 so we can begin training/using Civil 3D 2014.
I’m reading through readme file for the Architecture-MEP 2014 Object Enabler & noticed that it’s installed as part of the normal installation of all AutoCAD 2014 based products, including Civil 3D…woohoo! Unfortunately, the Structural & Plant OE’s don’t appear to have a readme file. Are these also installed as part of the normal installation of C3D 2014? Or will they need to be installed separately?
View 7 Replies
View Related
Nov 7, 2012
C3D 2012
Is there a 'property' to use the Point Group Name. I need it in the Point Table Style: Title text like this:
View 4 Replies
View Related
Aug 7, 2012
I am having a problem getting all the points I want to include in my DTM into a Point Group. The raw description inclusion of most double codes, codes with line designators and codes with size and description modifiers does not bring the points into the point group. (e.g. WL S, CLF E, PIN 18 where the description key set is created to size the pine tree by 18 and create a descriptor that says 18Inch Pine).
View 1 Replies
View Related
Jan 3, 2013
I know that there used to be a way in land desktop to change an entire point group to the same layer without having to do each point separately. How to do this in Civil 3d 2011?
View 3 Replies
View Related
Nov 7, 2013
When point groups are deleted through the UI and then recreated via code with the same name the criteria such as the excluded point number list is included. It would be nice if it started with a clean slate once created and not keep around deleted point group.
View 6 Replies
View Related
Apr 23, 2013
I have a bunch of culvert points in my drawing and I would like to include all of the in the same point group. They all have CUL in the raw discription but some are CUL 0.3 INV, CUL 0.4 INV, etc, etc.
Is it possible to group all of these by just using the CUL somehow so that I don't miss any?
View 2 Replies
View Related
Jan 20, 2012
How do I set a Default Point Group? When creating points manually, I want them to automatically go into a certain/current point group, but since I don't know the point range prior to creating the points, I am having to continuously update the "include" points catergory. I can set the default/current layer, default point style, etc, can I do the same with point group? I understand about the "all points" group and the description keys that can be utilized in the other individual point groups to group information , but Is there a better way? Under the point creation toolbar, there is a point group template, but when I create a point group thru there, it doesn't do anything but create the point group. None of the newly created points go into that group.... what is the point of that option?
View 6 Replies
View Related
May 25, 2013
Is there a way to renumber all the points in a point group? Right now I am doing each point individually but I have many points and it would be wonderful to learn how to do that automatically.
View 4 Replies
View Related
Mar 7, 2012
Is it possible to add points to a surface without adding them to a point group? I've got a bunch of ponds I'm doing and it will save me some time if I could just select the points, and not have to put them in a point group then add the point group.
View 5 Replies
View Related
Nov 14, 2013
im trying to create a point group by including all points and then excluding the points i don't need. it doesnt seem to be removing anything from the group. i used to do this all the time in ldd. is it still possible in c3d?
View 2 Replies
View Related
Apr 12, 2012
Project objects to profile view... got it. No problems selecting individual survey points or survey figures and projecting to profile view. Is there a way to project a entire point group to a profile. I have a point group created for the large number of points to be projected. Next I right click on the point group and click "select'. Then go to Project objects to profile view. Nothing...
This process works for the survey figures, but not the point groups! In prospector tab go to survey > figures then select CTRL + each figure to project then VIOLA' the whole group of figures are projected.
Is this limited to graphical selections only? If so, is there a workaround to generate a graphical selection set from the point group.
Using C3D 2010 on Win 32bit platform
View 1 Replies
View Related
Feb 2, 2012
I am trying to use the Station Offset to Points report from the Reports manager. Currently, as far as I ca see, there is no way to select a group of points to include, either by point group or selection from the drawing. There is only "Select All' or "Deselect All". I want a report that will show the station, offset, raw or full description and elevation of a group of points related to an alignment/street. I don't see that option.
View 2 Replies
View Related
Oct 5, 2013
when selecting a point group from the prospector tab, sometimes the point grips will light up and sometimes only the points will be only dashed.
Having the grips light up like that is very useful when viewing a region with many point groups.
How do I toggle this on and off?
View 3 Replies
View Related
May 23, 2013
Sometimes when i import points Civil 3d creates a Point group in the drawing with the name of the point file, sometime it does not. I prefer when it does create this point group. It always seems to create a Survey Point Group. How do i control wether or not a point group is created in the import?
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
View 5 Replies
View Related
Aug 30, 2013
When I use the AutoCAD List command on a Civil 3d Point, one reported datum is Primary Point Group.
I want to get at that information with vlisp, but when I vlax-dump a point, there is no mention of Primary Point Group. If that's a limitation of using vlisp, let me know, and I won't chase it.
Maybe I have to go in through the point groups collection?
View 5 Replies
View Related
Oct 31, 2012
I am running C3D 2010.
Somewhere along the line, someone in our office made our template import points into separate layers based on the RAW Description. I would like to un-do this. So far, I have deleted every point style & point label style except for 'Basic'. Inside of 'Basic', the layer is 'V-NODE'. However, some of my points are still coming in on layers like: 'V-Site-'(Raw Desc).
I'm about to start from scratch on the template, however, I'd like to avoid that because of the array of styles that are in it.
View 3 Replies
View Related
Apr 12, 2012
I'm using civil 3D 2012 for 2 weeks now. When I create a query to include or exclude points in a specific point group I get an error. It doesn't allow me to build a query with decimal number but only with natural number.
Everything was fine with my old civil 3D 2011.
The problem is with civil 3D 2012? or maybe their is a magic switch somewhere to allow me to use decimal number?
View 7 Replies
View Related
Jan 2, 2014
heres the problem we had created a slope style in 2012 15% - 25% and 25% - 100%. done this many times with no problems. so we upgrade and open the file in 2014 now there is a large white area that c3d is filling in.
Win 7 pro 12gb
NVIDIA Quadro 2000
LDD 2009
IDS 2014
View 3 Replies
View Related
May 3, 2013
Getting bizarre display in the Section Editor of the 3D Polylines that are in the drawing. The green line is the EG ground section.
In 2013, this same drawing displays normal, we don't see the 3D polylines in the Section Editor.
C3D 2014 SP1
W7x64; i7 8gb; Radeon HD 5700
View 2 Replies
View Related
Oct 15, 2013
Is there a way to create a point group of random points within a drawing and adjust the elevations for the points within that group? Some of the points in the group may have been manually created and some may have been imported by way of "Import Events"..
View 3 Replies
View Related
May 3, 2012
When you use the Import Survey Data wizard it automatically creates a point group that goes to the top of the list. This used to be created with a standard point style and description, but something has changed and I'm getting a different symbol and label that I definitely don't want as the default. I would think that this would be controled by the CreatePointGroup settings, but that isn't working for me. I can't find any other settings that would override or control this.
(running C3D 2012 sp4, Win7 64bit, 8GB)
View 9 Replies
View Related
Jul 10, 2013
I have a plugin that creates cogo points, and for some users it seems to crash every time, but for others it works just fine (as for myself, I have zero problems with it). The subroutine is simple:
Using civLock As DocumentLock = acadDoc.LockDocument
Using trans As Transaction = db.TransactionManager.StartTransaction()
Try
Dim Location As New Point3d(PointX, PointY, PointZ)
Dim CogoPoints As CogoPointCollection = civilDoc.CogoPoints
[Code] .....
The fatal error occurs when the point is added, prior to the attempt to assign a raw description. What is boggling me is that, like I said, it works flawlessly for me (and others) but not at all for some users.
View 1 Replies
View Related
Feb 28, 2012
when i create a point it does not display (label or point). if i create a point group with overrides for the point and label style the points display. the default point and label style are set to the same styles as the overrides.
View 2 Replies
View Related
Jan 2, 2013
how to show point labels on the points I imported from a .shp file. I used MAPIMPORT and brought in the associated object data but I don't know how to get it to display in my drawing.
View 7 Replies
View Related
Jul 17, 2013
I am new in using AutoCAD Civil 3D 2013. I used ArcMAP 10.1 to create a .mxd MAP of 4 points/locations - each point/location has the values of SampleID, XYZ-coordinates, Depth, ChemicalName - see the attached file for details.
I used the ArcToolbox to convert ArcMAP to CAD in the GeoProcess, obtained a DWG, and saved it in a folder of my C:/Temp/CDC_ArcGIS-GeoDatabase folder - see the first page of the attched file. I used AutoCAD Civil 3D 2013 to open that DWG file - I played with it in the basic 3D Wireframe a little bit, but I don't know how to display the feature/object of my 4-point MAP - see the last page of my attached file. How I can display/view the feature/object of my 4-point MAP in AutoCAD Civil 3D 2013.
The background of my AutoCAD Civil 3D 2013 is black. How can I change the background color to white or other light colors?
View 5 Replies
View Related
Oct 10, 2012
I'm trying to determine if it's possible to take a 09 LDD Companion drawing in which the elevations for many points have been moved AND/OR rotated (to align with roadway), and not only convert these to C3D, but also have them transferred along with the move/rotate information. We're talking about a mile long stretch of roadway and the project is 6 years old (i.e. no C3D when it was originally done).
The problem is that there are a ton of ground shots that need only be shown to 0.1 precision but are shown to 0.01 precision. LDD was not able to assign an elevation precision to groups of points, only all cogo points together, which meant we had to explode certain groups of "soft shot" points once they had been inserted at the desired precision.
If there's no way to do what I'm asking, it's no big deal for this case since the higher precision can be easily rounded to the lower by the viewer (better than the other way around). But as I am the only one on C3D and have been for the past 2 and a half years, we will likely face this monster again several times over with other drafters' projects and I'd like to have a best practice in place if we need to go the other way (extracting 0.01 precision from 0.1 precision).
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
View 9 Replies
View Related
Jul 21, 2013
How can I display images that are not included in any collection (some filter or smart collection)? A smart collection with parameters "Collection - contains - empty field" does not work. Lightroom 5.
View 2 Replies
View Related
Apr 4, 2012
Is there any way to change the format of Lat/Long in a C3D point list display from degrees, minutes, seconds to decimal degrees? I have looked pretty hard, but can't find anything. The geodetic calculator only does one item at a time, I think. Any plug-ins out there? I suppose this could be on a wish list as well.
I am using R2012.and have ended up manipulating point values in Excel-not a quick way of going about it.
View 7 Replies
View Related
Dec 21, 2013
I got this problem during creation of corridor surface boundaries. I would like to create a corridor datum surface using the daylight feature lines, automatically from the corridor surfaces-boundaries dialog box, but the daylight does not appear in the list.
View 5 Replies
View Related
Jun 25, 2013
2013 version. Long story short, I am having problems with pressure networks in my drawing so to simplify things I want to just show the top of the current watermain in my profiles because we are not doing anything with the water main, though it needs to be shown in the profile. To do this I created some points where the watermain is and made their elevation 1.8m lover than the existing surface at those points (due to the 1.8m of cover the watermain has).
I then created a surface using those points and an outer boundary surrounding the points. For some reason the surface stops at one point and doesn't continue to the rest (about 5 more points). So when I create my profile the surface stops short. The points are included in the point group the surface uses, and the outer boundary doesn't cut them out either. Not sure why the surface isn't referencing those points.
View 5 Replies
View Related
