AutoCAD Civil 3D :: Cogo Point Elevation Precision / Display From LDD
Oct 10, 2012
I'm trying to determine if it's possible to take a 09 LDD Companion drawing in which the elevations for many points have been moved AND/OR rotated (to align with roadway), and not only convert these to C3D, but also have them transferred along with the move/rotate information. We're talking about a mile long stretch of roadway and the project is 6 years old (i.e. no C3D when it was originally done).
The problem is that there are a ton of ground shots that need only be shown to 0.1 precision but are shown to 0.01 precision. LDD was not able to assign an elevation precision to groups of points, only all cogo points together, which meant we had to explode certain groups of "soft shot" points once they had been inserted at the desired precision.
If there's no way to do what I'm asking, it's no big deal for this case since the higher precision can be easily rounded to the lower by the viewer (better than the other way around). But as I am the only one on C3D and have been for the past 2 and a half years, we will likely face this monster again several times over with other drafters' projects and I'd like to have a best practice in place if we need to go the other way (extracting 0.01 precision from 0.1 precision).
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
View 9 Replies
ADVERTISEMENT
Dec 17, 2012
How I would replace the Elevation label on a point with Alphanumeric text on certain points in a point group (or if it can be done at all)
Some background info:
I work with site diagrams that have monitoring wells and each one has a groundwater elevation value that gets updated every year according to field data. Our current setup is that the monitor well name and elevation values are displayed using point labels and looks like:
x 12-1 (Monitoring well name)
788.432 (Groundwater elevation value)
However, sometimes the monitoring well is dry and we need to display 'DRY' instead of a numeric elevation value. Autocad won't let me put 'DRY' as an elevation because it's not a number. Is there a way to override this, or somehow make the label display 'DRY' if elevation of 0 is entered?
Another use to overriding point label elevation is that sometimes the groundwater elevation that we get from the monitoring well is so far off from the general contour pattern that we will put the elevation value of that well in brackets such as (788.432) and indicate that this means the elevation was not included in the groundwater contour flow map.
Is there a way to do this override, or is there another method I should be using to label my monitoring well elevations? I know I could just MTEXT everything, but that's double the time to update the point elevations for the contours and then updating the mtext to display the numerical elevation values.
View 4 Replies
View Related
Sep 16, 2013
Question 1: Is it possible to change a Survey COGO point to a regular COGO point so you can edit the datum?
If not:
Question 2: Is it possible to transfer the survey database from one office to another so the end office can make datum changes to the survey COGO points. Will the link between the file and the database still apply?
C3D 2013
Windows 7 64 bit
View 2 Replies
View Related
Jun 20, 2008
In the profile band the elevations are set to 3 decimal places. I just want to get it to 2 places.
View 3 Replies
View Related
Jul 1, 2013
I have a rather odd situation. I have input a small table of survey points (we don't have access to a data collector, so it had to be manual).
I have a properly located and back-sited setup, with all of the points located in 3 dimensions.
The Northing/Easting/Elevation data is calculated and displayed for all of the points in the "observations" table accurately.
Every point has the same display/labeling properties/settings, but only 2 points properly display the elevation as calculated.
The problem seems to be that the points aren't accurately retrieving the Elevation from the table.
For some reason, in the “Properties” dialogue for the points that display properly, the “Point Elevation” field actually contains a number; whereas the points that don’t, the same field reads “*PROPERTY NOT SET*”.
This makes no sense, because in the table that defines the points, the elevation is accurate for all of the points, and I can’t find a difference in the table- or in the point properties- between the correctly displayed points, and the ones that are missing the elevation label.
View 8 Replies
View Related
Jun 17, 2013
Can you manually create a new cogo point and have it pick up the elevation from a 3D entity that you snap to?
I found this thread from 2010 that says no at that time.
[URL]
Is this still not possible with C3D 2013?
View 2 Replies
View Related
Dec 19, 2012
When I snap a point to an object, the point takes on the elevation of the object. I would rather the point's elevation stay as is.
-changing osnapz variable
-latest civil 3d service pack
A few weeks ago I did not have this problem but once my computer was switched to the company's global server and c3d was reinstalled the problem appeared. Furthermore (post switchover), when a colleage of mine prepared a simple test drawing with just a line and a point, he was able to snap to that line without the point changing elevation. When he sent that drawing to me and I tried snapping the point to the object, the same problem occured with the point taking the elevation of the line object. I suspect it is a system variable issue
View 7 Replies
View Related
Jan 7, 2013
image attached.is there a way to get rid of the hover information that pops up for cogo points? while im looking at the points in a list there is a box thats pops up with the information i am looking at blocking the information i need to look at. if there is a way.
View 5 Replies
View Related
Apr 12, 2012
I have a layout in my drawing (Civil 3d 2011) with multiple viewports and my point symbols (trees, manholes, etc.) won't display. I have other layouts in the same drawing that display them fine, but I need to use this specific layout for what I'm doing. This must be a setting of some sort but I can't seem to figure it out.
View 3 Replies
View Related
Apr 23, 2012
I've this file.It's containing survey block point ..I can't convert it to cogo point ..Also no body can do it cuz it's coming from civil 3D by exporting the file.......
View 9 Replies
View Related
Jan 4, 2013
I have a couple hundred cogo points with all different descriptions. is there a way to add "use these" to the beginning of all the nodes at once?
View 2 Replies
View Related
Jul 30, 2012
I would like to rotate my Cogo point label so that i will be able to see it from a set view or a different UCS. Example I would like to see the label in the "LEFT" view.
View 1 Replies
View Related
Sep 18, 2013
I have a large number of cogo points that I have set. I would like to move, as a group, the label portion only and leave the coordinate value as is. This would be a time saver as I am seeing that I am going to have to move every point individually. I used to be able to do this in LDD along with changing the rotation. I've tried locking the points and then moving them but the values change. Not too happy with the lack of control with the leader either.
View 3 Replies
View Related
Aug 5, 2012
any way to make a cogo point label become freely movable. Just now I can move it somewhat freely to the left or to the right of the original location, but if I want to move it just up or down it doesn't work very well. It flips around the (invisible) leader.
View 2 Replies
View Related
Aug 10, 2012
I am a surveyor doing an asbuilt of some ponds. I am working in the engineer's dwg. In PS, he does not scale down his drawing sheet block to 1"=1', he keeps it the same scale as model space, i.e. 1"=50'.
He has a viewport in the layout, and my Cogo Points seemed to be scaled at 1"=1', which makes them much to small, but everthing else is scaled correctly.
How can I make my Cogo Points appear bigger in PS?
I tried dbl-clicking in the viewport to be in MS, and the viewport says it's scale is 1'0" = 1'0". When I change it to 1"=50', the model view shrinks way down (the viewed area is bigger), and when I scroll to make the model view bigger, the Cogo Points are still small.
When I read the Properties of the viewport, it says:
Anno scale: 1"=50
Standard scale= 1"=50
Custom scale= 0.02
How I can get this viewport to make my Cogo Points big as they should be?
C3d 2010 (no SP)
Win7
View 5 Replies
View Related
May 19, 2011
I'm seeing weird behavior in C3D 2011 that I never saw in previous versions.Sometimes when I select a Cogo Point and attempt to edit the Raw Description from the Properties window, C3D changes the description to all lower-case letters, and it will not let me key in any upper-case letters. If I select the point -> Edit Points, I can edit the description in Panorama without problems. It's only in the Properties window that it refuses to accept anything other than uppercase letters.
This issue only happens sometimes. Sometimes, I'm able to edit descriptions from the Properties window with no problem. Other times, C3D changes the existing description to all lowercase letters, and refuses to allow me to enter anything but lowercase letters.what causes it, and ideally some way to get C3D 2011 to stop behaving like this?
View 5 Replies
View Related
Mar 29, 2012
It's taking a long time to move cogo points. About 2 minutes for a single point move. Other commands affecting points are taking longer too. Would it just be a function of file size.
Sample point:
AECC_COGO_POINT Layer: "V-NODE-P-CURB-FACE"
Space: Model space
Handle = daf3e
Primary point group : Pro Face Curb
Point Number : 5198
[code]...
View 4 Replies
View Related
Dec 11, 2012
I am using Description Keys for all my points that I bring in from surveying in the field. Any point that does not have a specific descriptor key ends up on a specific layer with a specific style that I cannot figure where to set. I have gone through my point default settings as stated in other postings but all seem to be set correctly mostly to <none>. I have gone through my Point Group settings without finding the culprit either. I can easily change the settings as I only have a few points that do this but I want to find the issue.
View 6 Replies
View Related
May 18, 2012
I've been generally having trouble with Civil 3D 2012 taking a long time to do tasks. One that takes quite a while is if I drag a Cogo Point Label. As stated it takes about 75 seconds. It will move to where I drag it immediately but then the program is unresponsive for a minute and 15 seconds.
In the past 4 days I've repaired C3D, tried 4 or 5 different versions of the display driver and did a windows update. A lot of commands, specifically Civil 3D commands, are very slow. Does this ring any bells?
Civil 3D 2012 with SP (Update) 1
NVIDIA Quadro FX 4600 768MB GDDR3 (Tune log reports 2530 MB)
Driver 8.17.0012.9670
View 9 Replies
View Related
Jul 10, 2013
I have a plugin that creates cogo points, and for some users it seems to crash every time, but for others it works just fine (as for myself, I have zero problems with it). The subroutine is simple:
Using civLock As DocumentLock = acadDoc.LockDocument
Using trans As Transaction = db.TransactionManager.StartTransaction()
Try
Dim Location As New Point3d(PointX, PointY, PointZ)
Dim CogoPoints As CogoPointCollection = civilDoc.CogoPoints
[Code] .....
The fatal error occurs when the point is added, prior to the attempt to assign a raw description. What is boggling me is that, like I said, it works flawlessly for me (and others) but not at all for some users.
View 1 Replies
View Related
May 14, 2013
So I have a survey of a roadway that was created 15 years ago and was converted into autocad civil 3d 2012. No problems there, however, I am going through the survey and rotating the COGO points (ie Traffic Signs, Utility Poles) and the text to be parallel to the roadway. I am in UCS World and have no problems rotating the points and text to what I want. THe problem starts when I rotate the drawing using UCS 3P so that I am looking at a portion of the roadway that is parallel to my computer screen. Now the text and orientation of the signs etc are no longer parallel to the roadway and did not rotate when I rotated the entire project.
Now I was under the impression the points were to rotate automatically to what I set them as, ie parallel to the roadway. I'm sure this is an easy fix or I am not understanding something.
View 1 Replies
View Related
May 18, 2013
I need to update the user defined property values using C# code,I can see information on how to ge the values of UDP but cannot see any information on how to modify, edit, update or add information to the UDP of a point.Basically in the attached image i want to add "Street light" to the Type UDP.
View 5 Replies
View Related
Oct 7, 2013
I think this issue started with SP2. I don't remember having these issues in SP1 and earlier.
Create some COGO points at varying elevations.Start a new feature line.Use "node" object snap and pick your first cogo pointIt does not pick up the elevation of the point (it used to)Now draw feature line segments to a few more cogo points entering the elevation each time.It does not pick up the elevation of the point (it used to)Now switch to Arc mode and snap to a few more cogo points.It does correctly picks up the elevation of the cogo points (like it used to)R.K. McSwain | CADpanacea | twitter | Cadalyst tips/code
View 2 Replies
View Related
Aug 7, 2012
We have survey files that we xref into our design files. In the survey files themselves, the points don't change color. When we xref them in, the point markers (only the circular node on the actual point, not the line coming off of it) take on the color of whatever the current layer is in the drawing, only fixable by changing the current letter and regenerating.
View 1 Replies
View Related
Nov 29, 2012
Just switched to 2012 from 2010. When I try to edit the description format field in the properties window of a selected cogo point, I can't type in caps, it's all lower case. If I right click and edit the point, I can use capital letters, however. (running C3D 2012 sp4, Win7 64bit, 8GB)
View 2 Replies
View Related
Oct 30, 2012
I have a project I designed and grading plan is almost done. My proposed surface lables read as 1256.50. How can I get them to read just 56.50? I have a FG surface I created and am labeling using surface elevations. I am running out of room and need to free up some space. I don't want do drop my surface 1200'.
View 3 Replies
View Related
Nov 21, 2013
Is there a way for the elevation of surface to be shown in the bottom left corner along with the easting and northing as the cursor tracks over the surface? currently only the easting and northing track with the cursor the elevation remains 0.00
View 4 Replies
View Related
Sep 21, 2012
Is there a way to change all your point styles display mode (flatten to elevation, use point elevation, or exaggerate elevation) at once? I don't mean make a new style and then apply it to all points: I want to systematically change it for all my current point styles.
View 5 Replies
View Related
Sep 19, 2012
I want to color cut/fill using red/greens schemes.
I want to use "interval with datum" method, and 2' intervals.
That gives like 20 rows for cut and fill, and so c3d applies one red to 5 rows, then next red to another 5, and so on.
I could pick colors by hand, but that dumb dialog is so slow, and its not easy to visually pick a nice gradation.
Is there no way to say "step from this color to that"?
Even when I do get all set up, I am finding performance of displaying the 2d solids takes forever.
I obviously have a large surface, but that is why we pay for good software right?
I am on c3d 2012 on a fast 64 bit win 7 machine. [URL]
View 1 Replies
View Related
Jul 28, 2012
Is there anyway to create a point from the coordinate and elevation data listed in a section inquiry panel (see attached)?
View 3 Replies
View Related
Aug 28, 2012
I'm looking to change an elevation of a survey point within a drawing. I can see where it is possible to manually unlock the points from the Survey Database to allow the user to edit the point. I'm not seeing a method or property in the API Help for 2013 to do the unlocking with code.
Also is it possible to convert a Survey Point to a regular Cogo Point through the code? Or do I have to delte the point and then recreate it as a COGO point? I think this will be my work around if the above doesn't work.
View 5 Replies
View Related
