AutoCAD Civil 3D :: 2011 Edit Cogo Point Descriptions
May 19, 2011
I'm seeing weird behavior in C3D 2011 that I never saw in previous versions.Sometimes when I select a Cogo Point and attempt to edit the Raw Description from the Properties window, C3D changes the description to all lower-case letters, and it will not let me key in any upper-case letters. If I select the point -> Edit Points, I can edit the description in Panorama without problems. It's only in the Properties window that it refuses to accept anything other than uppercase letters.
This issue only happens sometimes. Sometimes, I'm able to edit descriptions from the Properties window with no problem. Other times, C3D changes the existing description to all lowercase letters, and refuses to allow me to enter anything but lowercase letters.what causes it, and ideally some way to get C3D 2011 to stop behaving like this?
View 5 Replies
ADVERTISEMENT
Dec 9, 2013
Is there a way to edit the point descriptions in the drawing and update my auto line work to match it. I can edit the point description fine, but my auto line work will not update?
View 3 Replies
View Related
Sep 16, 2013
Question 1: Is it possible to change a Survey COGO point to a regular COGO point so you can edit the datum?
If not:
Question 2: Is it possible to transfer the survey database from one office to another so the end office can make datum changes to the survey COGO points. Will the link between the file and the database still apply?
C3D 2013
Windows 7 64 bit
View 2 Replies
View Related
Nov 20, 2012
I was given a file with LDT points in it that show point#,Elev, Desc. When I convert the description turn into a number. How does that happen and how can I change it to convert the description correctly?
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
View 9 Replies
View Related
Feb 23, 2012
Im experimenting with C3D2012, and found an issue... (Same issue is found in C3D2011)
When I change a points Raw Description to anything that isn't listed in the DescKey, the Full Description does not change. It will only change/update the Full Description if the new Raw Description is contained within the DescKey file.
Original Point Raw Description as "EP" - DescKey format for "EP" is "Edge Pavement" - Full Description = "Edge Pavement"
Change Point Raw Description to "X" - No listing for "X" in DescKey - Full Description stays "Edge Pavement"
Change Point Code to "GS" - DescKey format for "GS" is "Ground Shot" - Full Description updates to "Ground Shot"
While most of the time any updated code SHOULD be in the DescKey file, I can see times where that may not be the case, so it should update even if it doesn't find the Raw Description in the DescKey file.
View 9 Replies
View Related
Jan 7, 2013
image attached.is there a way to get rid of the hover information that pops up for cogo points? while im looking at the points in a list there is a box thats pops up with the information i am looking at blocking the information i need to look at. if there is a way.
View 5 Replies
View Related
Apr 23, 2012
I've this file.It's containing survey block point ..I can't convert it to cogo point ..Also no body can do it cuz it's coming from civil 3D by exporting the file.......
View 9 Replies
View Related
Jan 4, 2013
I have a couple hundred cogo points with all different descriptions. is there a way to add "use these" to the beginning of all the nodes at once?
View 2 Replies
View Related
Jul 30, 2012
I would like to rotate my Cogo point label so that i will be able to see it from a set view or a different UCS. Example I would like to see the label in the "LEFT" view.
View 1 Replies
View Related
Sep 18, 2013
I have a large number of cogo points that I have set. I would like to move, as a group, the label portion only and leave the coordinate value as is. This would be a time saver as I am seeing that I am going to have to move every point individually. I used to be able to do this in LDD along with changing the rotation. I've tried locking the points and then moving them but the values change. Not too happy with the lack of control with the leader either.
View 3 Replies
View Related
Aug 5, 2012
any way to make a cogo point label become freely movable. Just now I can move it somewhat freely to the left or to the right of the original location, but if I want to move it just up or down it doesn't work very well. It flips around the (invisible) leader.
View 2 Replies
View Related
Aug 10, 2012
I am a surveyor doing an asbuilt of some ponds. I am working in the engineer's dwg. In PS, he does not scale down his drawing sheet block to 1"=1', he keeps it the same scale as model space, i.e. 1"=50'.
He has a viewport in the layout, and my Cogo Points seemed to be scaled at 1"=1', which makes them much to small, but everthing else is scaled correctly.
How can I make my Cogo Points appear bigger in PS?
I tried dbl-clicking in the viewport to be in MS, and the viewport says it's scale is 1'0" = 1'0". When I change it to 1"=50', the model view shrinks way down (the viewed area is bigger), and when I scroll to make the model view bigger, the Cogo Points are still small.
When I read the Properties of the viewport, it says:
Anno scale: 1"=50
Standard scale= 1"=50
Custom scale= 0.02
How I can get this viewport to make my Cogo Points big as they should be?
C3d 2010 (no SP)
Win7
View 5 Replies
View Related
Mar 29, 2012
It's taking a long time to move cogo points. About 2 minutes for a single point move. Other commands affecting points are taking longer too. Would it just be a function of file size.
Sample point:
AECC_COGO_POINT Layer: "V-NODE-P-CURB-FACE"
Space: Model space
Handle = daf3e
Primary point group : Pro Face Curb
Point Number : 5198
[code]...
View 4 Replies
View Related
Oct 10, 2012
I'm trying to determine if it's possible to take a 09 LDD Companion drawing in which the elevations for many points have been moved AND/OR rotated (to align with roadway), and not only convert these to C3D, but also have them transferred along with the move/rotate information. We're talking about a mile long stretch of roadway and the project is 6 years old (i.e. no C3D when it was originally done).
The problem is that there are a ton of ground shots that need only be shown to 0.1 precision but are shown to 0.01 precision. LDD was not able to assign an elevation precision to groups of points, only all cogo points together, which meant we had to explode certain groups of "soft shot" points once they had been inserted at the desired precision.
If there's no way to do what I'm asking, it's no big deal for this case since the higher precision can be easily rounded to the lower by the viewer (better than the other way around). But as I am the only one on C3D and have been for the past 2 and a half years, we will likely face this monster again several times over with other drafters' projects and I'd like to have a best practice in place if we need to go the other way (extracting 0.01 precision from 0.1 precision).
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
View 9 Replies
View Related
Dec 17, 2012
How I would replace the Elevation label on a point with Alphanumeric text on certain points in a point group (or if it can be done at all)
Some background info:
I work with site diagrams that have monitoring wells and each one has a groundwater elevation value that gets updated every year according to field data. Our current setup is that the monitor well name and elevation values are displayed using point labels and looks like:
x 12-1 (Monitoring well name)
788.432 (Groundwater elevation value)
However, sometimes the monitoring well is dry and we need to display 'DRY' instead of a numeric elevation value. Autocad won't let me put 'DRY' as an elevation because it's not a number. Is there a way to override this, or somehow make the label display 'DRY' if elevation of 0 is entered?
Another use to overriding point label elevation is that sometimes the groundwater elevation that we get from the monitoring well is so far off from the general contour pattern that we will put the elevation value of that well in brackets such as (788.432) and indicate that this means the elevation was not included in the groundwater contour flow map.
Is there a way to do this override, or is there another method I should be using to label my monitoring well elevations? I know I could just MTEXT everything, but that's double the time to update the point elevations for the contours and then updating the mtext to display the numerical elevation values.
View 4 Replies
View Related
Dec 11, 2012
I am using Description Keys for all my points that I bring in from surveying in the field. Any point that does not have a specific descriptor key ends up on a specific layer with a specific style that I cannot figure where to set. I have gone through my point default settings as stated in other postings but all seem to be set correctly mostly to <none>. I have gone through my Point Group settings without finding the culprit either. I can easily change the settings as I only have a few points that do this but I want to find the issue.
View 6 Replies
View Related
May 18, 2012
I've been generally having trouble with Civil 3D 2012 taking a long time to do tasks. One that takes quite a while is if I drag a Cogo Point Label. As stated it takes about 75 seconds. It will move to where I drag it immediately but then the program is unresponsive for a minute and 15 seconds.
In the past 4 days I've repaired C3D, tried 4 or 5 different versions of the display driver and did a windows update. A lot of commands, specifically Civil 3D commands, are very slow. Does this ring any bells?
Civil 3D 2012 with SP (Update) 1
NVIDIA Quadro FX 4600 768MB GDDR3 (Tune log reports 2530 MB)
Driver 8.17.0012.9670
View 9 Replies
View Related
Jul 10, 2013
I have a plugin that creates cogo points, and for some users it seems to crash every time, but for others it works just fine (as for myself, I have zero problems with it). The subroutine is simple:
Using civLock As DocumentLock = acadDoc.LockDocument
Using trans As Transaction = db.TransactionManager.StartTransaction()
Try
Dim Location As New Point3d(PointX, PointY, PointZ)
Dim CogoPoints As CogoPointCollection = civilDoc.CogoPoints
[Code] .....
The fatal error occurs when the point is added, prior to the attempt to assign a raw description. What is boggling me is that, like I said, it works flawlessly for me (and others) but not at all for some users.
View 1 Replies
View Related
May 14, 2013
So I have a survey of a roadway that was created 15 years ago and was converted into autocad civil 3d 2012. No problems there, however, I am going through the survey and rotating the COGO points (ie Traffic Signs, Utility Poles) and the text to be parallel to the roadway. I am in UCS World and have no problems rotating the points and text to what I want. THe problem starts when I rotate the drawing using UCS 3P so that I am looking at a portion of the roadway that is parallel to my computer screen. Now the text and orientation of the signs etc are no longer parallel to the roadway and did not rotate when I rotated the entire project.
Now I was under the impression the points were to rotate automatically to what I set them as, ie parallel to the roadway. I'm sure this is an easy fix or I am not understanding something.
View 1 Replies
View Related
May 18, 2013
I need to update the user defined property values using C# code,I can see information on how to ge the values of UDP but cannot see any information on how to modify, edit, update or add information to the UDP of a point.Basically in the attached image i want to add "Street light" to the Type UDP.
View 5 Replies
View Related
Oct 7, 2013
I think this issue started with SP2. I don't remember having these issues in SP1 and earlier.
Create some COGO points at varying elevations.Start a new feature line.Use "node" object snap and pick your first cogo pointIt does not pick up the elevation of the point (it used to)Now draw feature line segments to a few more cogo points entering the elevation each time.It does not pick up the elevation of the point (it used to)Now switch to Arc mode and snap to a few more cogo points.It does correctly picks up the elevation of the cogo points (like it used to)R.K. McSwain | CADpanacea | twitter | Cadalyst tips/code
View 2 Replies
View Related
Aug 7, 2012
We have survey files that we xref into our design files. In the survey files themselves, the points don't change color. When we xref them in, the point markers (only the circular node on the actual point, not the line coming off of it) take on the color of whatever the current layer is in the drawing, only fixable by changing the current letter and regenerating.
View 1 Replies
View Related
Nov 29, 2012
Just switched to 2012 from 2010. When I try to edit the description format field in the properties window of a selected cogo point, I can't type in caps, it's all lower case. If I right click and edit the point, I can use capital letters, however. (running C3D 2012 sp4, Win7 64bit, 8GB)
View 2 Replies
View Related
Feb 2, 2012
We have been processing/adjusting our field control observations in an outside program (Star-net) and then importing the control into our C3D Database through an import event (PNEZD File). Once the control has been imported we import our field data (.fbk file) through an import event as well. The problem that we are having is once you process a .fbk that uses one of those control points it "locks" the control point, so the next day when we get another field download and the control is re-adjusted, we can't update the control points in the C3D Database.
The only way we have found to get our newly adjust control into the C3D Database is too delete all of the "import events" that use the control point and then import our new control. This is a HUGE hassle.
View 9 Replies
View Related
Nov 1, 2012
See pic. Top pic is 2013 point cloud properties. bottom pic is 2011 point cloud properties. 2013 has a new 'point cloud adjust' option in properties.
Both drawings have same 'Lidar Classification' Style, but 2013 is all gray. I tried changing some fields inside the properties for 2013 under the point cloud adjust to no avail.
why this is like this and what I need to do to see the different colors for the different classifications.
View 9 Replies
View Related
Jun 20, 2012
I have been trying to export our 2012 DescKeys with Point Styles and Labels to 2011. How to do this without recreating them all.
View 2 Replies
View Related
Apr 15, 2012
how I can export the nested data of Cogo Points. I need to get them into a spreadsheet.
I have tried exporting a .shp file and opening the .dbf file in excel, however, it only seems to export the data field of the table and not the value.
View 9 Replies
View Related
Aug 26, 2013
I know this. I am aware. This is why I avoid changing the reference point as much as possible if I have profile views or anything else dependent on my alignment. I also have no problem with this dialog giving me a useful reminder.
My problem is this: if I want to make my alignment longer, and I grab the grip at the end of it and drag it to a new location, the reference point moves too! Who in their right mind would want the reference point to move when adjusting the end? Personally I wouldn't want C3D to ever move my reference point automatically. I can have some sympathy with moving it if I am grip-editing the start of the alignment, or the tangent on which the reference point resides. But I'm editing at the end of the alignment, on a different tangent. Why would you move my reference point and make me have to go back and reset it to where it was? How dare you throw your warning message at me for moving the reference point back to where it should be when you secretly moved it to a wrong location with no warning whatsoever?
View 1 Replies
View Related
May 31, 2012
In LDDT, I was able to create points and manually assign a point number.
I know in Civil 3D 2013, i can assign a point number also by changing a toggle under Point Creation Tools to False.
My problem is that everytime I close out of that box and get back in, it reverts the toggle back to TRUE so I have to keep changing it back to False as well as the Next Point Number. In the above example, the Next Point Number should be 1147 (which is after my manually created point 1146) but it keeps going back to 33 which is the next available number after #1.
View 2 Replies
View Related
Nov 29, 2012
I created a Description Key called "EP" and it will land in a "S-PTS-EP" layer automatically.
I then created a Description Key called "NEW EP* " and created it to land in a new layer called "S-PTS-EP-NEW". But, when I manually create a point called "NEW EP" or "NEW EP BC", it does not land in the "S-PTS-EP-NEW" layer.
Is there some switch I need to turn on or is my description not complying with some naming convention?
View 2 Replies
View Related
Mar 23, 2012
I've been using the COGOEditor in civil 3D 2012. I enter a description for each entry. The description does not get saved. If i open the traverse file using a text editor, enter a description, save it, then reopen in COGOEditor, I still don't see any descriptions.
View 6 Replies
View Related
