image attached.is there a way to get rid of the hover information that pops up for cogo points? while im looking at the points in a list there is a box thats pops up with the information i am looking at blocking the information i need to look at. if there is a way.
View 5 RepliesQuestion 1: Is it possible to change a Survey COGO point to a regular COGO point so you can edit the datum?
If not:
Question 2: Is it possible to transfer the survey database from one office to another so the end office can make datum changes to the survey COGO points. Will the link between the file and the database still apply?
C3D 2013
Windows 7 64 bit
I've this file.It's containing survey block point ..I can't convert it to cogo point ..Also no body can do it cuz it's coming from civil 3D by exporting the file.......
View 9 Replies View RelatedI have a couple hundred cogo points with all different descriptions. is there a way to add "use these" to the beginning of all the nodes at once?
View 2 Replies View RelatedI would like to rotate my Cogo point label so that i will be able to see it from a set view or a different UCS. Example I would like to see the label in the "LEFT" view.
View 1 Replies View RelatedI have a large number of cogo points that I have set. I would like to move, as a group, the label portion only and leave the coordinate value as is. This would be a time saver as I am seeing that I am going to have to move every point individually. I used to be able to do this in LDD along with changing the rotation. I've tried locking the points and then moving them but the values change. Not too happy with the lack of control with the leader either.
View 3 Replies View Relatedany way to make a cogo point label become freely movable. Just now I can move it somewhat freely to the left or to the right of the original location, but if I want to move it just up or down it doesn't work very well. It flips around the (invisible) leader.
View 2 Replies View RelatedI am a surveyor doing an asbuilt of some ponds. I am working in the engineer's dwg. In PS, he does not scale down his drawing sheet block to 1"=1', he keeps it the same scale as model space, i.e. 1"=50'.
He has a viewport in the layout, and my Cogo Points seemed to be scaled at 1"=1', which makes them much to small, but everthing else is scaled correctly.
How can I make my Cogo Points appear bigger in PS?
I tried dbl-clicking in the viewport to be in MS, and the viewport says it's scale is 1'0" = 1'0". When I change it to 1"=50', the model view shrinks way down (the viewed area is bigger), and when I scroll to make the model view bigger, the Cogo Points are still small.
When I read the Properties of the viewport, it says:
Anno scale: 1"=50
Standard scale= 1"=50
Custom scale= 0.02
How I can get this viewport to make my Cogo Points big as they should be?
C3d 2010 (no SP)
Win7
I'm seeing weird behavior in C3D 2011 that I never saw in previous versions.Sometimes when I select a Cogo Point and attempt to edit the Raw Description from the Properties window, C3D changes the description to all lower-case letters, and it will not let me key in any upper-case letters. If I select the point -> Edit Points, I can edit the description in Panorama without problems. It's only in the Properties window that it refuses to accept anything other than uppercase letters.
This issue only happens sometimes. Sometimes, I'm able to edit descriptions from the Properties window with no problem. Other times, C3D changes the existing description to all lowercase letters, and refuses to allow me to enter anything but lowercase letters.what causes it, and ideally some way to get C3D 2011 to stop behaving like this?
It's taking a long time to move cogo points. About 2 minutes for a single point move. Other commands affecting points are taking longer too. Would it just be a function of file size.
Sample point:
AECC_COGO_POINT Layer: "V-NODE-P-CURB-FACE"
Space: Model space
Handle = daf3e
Primary point group : Pro Face Curb
Point Number : 5198
[code]...
I'm trying to determine if it's possible to take a 09 LDD Companion drawing in which the elevations for many points have been moved AND/OR rotated (to align with roadway), and not only convert these to C3D, but also have them transferred along with the move/rotate information. We're talking about a mile long stretch of roadway and the project is 6 years old (i.e. no C3D when it was originally done).
The problem is that there are a ton of ground shots that need only be shown to 0.1 precision but are shown to 0.01 precision. LDD was not able to assign an elevation precision to groups of points, only all cogo points together, which meant we had to explode certain groups of "soft shot" points once they had been inserted at the desired precision.
If there's no way to do what I'm asking, it's no big deal for this case since the higher precision can be easily rounded to the lower by the viewer (better than the other way around). But as I am the only one on C3D and have been for the past 2 and a half years, we will likely face this monster again several times over with other drafters' projects and I'd like to have a best practice in place if we need to go the other way (extracting 0.01 precision from 0.1 precision).
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
How I would replace the Elevation label on a point with Alphanumeric text on certain points in a point group (or if it can be done at all)
Some background info:
I work with site diagrams that have monitoring wells and each one has a groundwater elevation value that gets updated every year according to field data. Our current setup is that the monitor well name and elevation values are displayed using point labels and looks like:
x 12-1 (Monitoring well name)
788.432 (Groundwater elevation value)
However, sometimes the monitoring well is dry and we need to display 'DRY' instead of a numeric elevation value. Autocad won't let me put 'DRY' as an elevation because it's not a number. Is there a way to override this, or somehow make the label display 'DRY' if elevation of 0 is entered?
Another use to overriding point label elevation is that sometimes the groundwater elevation that we get from the monitoring well is so far off from the general contour pattern that we will put the elevation value of that well in brackets such as (788.432) and indicate that this means the elevation was not included in the groundwater contour flow map.
Is there a way to do this override, or is there another method I should be using to label my monitoring well elevations? I know I could just MTEXT everything, but that's double the time to update the point elevations for the contours and then updating the mtext to display the numerical elevation values.
I am using Description Keys for all my points that I bring in from surveying in the field. Any point that does not have a specific descriptor key ends up on a specific layer with a specific style that I cannot figure where to set. I have gone through my point default settings as stated in other postings but all seem to be set correctly mostly to <none>. I have gone through my Point Group settings without finding the culprit either. I can easily change the settings as I only have a few points that do this but I want to find the issue.
View 6 Replies View RelatedI've been generally having trouble with Civil 3D 2012 taking a long time to do tasks. One that takes quite a while is if I drag a Cogo Point Label. As stated it takes about 75 seconds. It will move to where I drag it immediately but then the program is unresponsive for a minute and 15 seconds.
In the past 4 days I've repaired C3D, tried 4 or 5 different versions of the display driver and did a windows update. A lot of commands, specifically Civil 3D commands, are very slow. Does this ring any bells?
Civil 3D 2012 with SP (Update) 1
NVIDIA Quadro FX 4600 768MB GDDR3 (Tune log reports 2530 MB)
Driver 8.17.0012.9670
I have a plugin that creates cogo points, and for some users it seems to crash every time, but for others it works just fine (as for myself, I have zero problems with it). The subroutine is simple:
Using civLock As DocumentLock = acadDoc.LockDocument
Using trans As Transaction = db.TransactionManager.StartTransaction()
Try
Dim Location As New Point3d(PointX, PointY, PointZ)
Dim CogoPoints As CogoPointCollection = civilDoc.CogoPoints
[Code] .....
The fatal error occurs when the point is added, prior to the attempt to assign a raw description. What is boggling me is that, like I said, it works flawlessly for me (and others) but not at all for some users.
So I have a survey of a roadway that was created 15 years ago and was converted into autocad civil 3d 2012. No problems there, however, I am going through the survey and rotating the COGO points (ie Traffic Signs, Utility Poles) and the text to be parallel to the roadway. I am in UCS World and have no problems rotating the points and text to what I want. THe problem starts when I rotate the drawing using UCS 3P so that I am looking at a portion of the roadway that is parallel to my computer screen. Now the text and orientation of the signs etc are no longer parallel to the roadway and did not rotate when I rotated the entire project.
Now I was under the impression the points were to rotate automatically to what I set them as, ie parallel to the roadway. I'm sure this is an easy fix or I am not understanding something.
I need to update the user defined property values using C# code,I can see information on how to ge the values of UDP but cannot see any information on how to modify, edit, update or add information to the UDP of a point.Basically in the attached image i want to add "Street light" to the Type UDP.
View 5 Replies View RelatedI think this issue started with SP2. I don't remember having these issues in SP1 and earlier.
Create some COGO points at varying elevations.Start a new feature line.Use "node" object snap and pick your first cogo pointIt does not pick up the elevation of the point (it used to)Now draw feature line segments to a few more cogo points entering the elevation each time.It does not pick up the elevation of the point (it used to)Now switch to Arc mode and snap to a few more cogo points.It does correctly picks up the elevation of the cogo points (like it used to)R.K. McSwain | CADpanacea | twitter | Cadalyst tips/code
We have survey files that we xref into our design files. In the survey files themselves, the points don't change color. When we xref them in, the point markers (only the circular node on the actual point, not the line coming off of it) take on the color of whatever the current layer is in the drawing, only fixable by changing the current letter and regenerating.
View 1 Replies View RelatedJust switched to 2012 from 2010. When I try to edit the description format field in the properties window of a selected cogo point, I can't type in caps, it's all lower case. If I right click and edit the point, I can use capital letters, however. (running C3D 2012 sp4, Win7 64bit, 8GB)
View 2 Replies View Relatedhow I can export the nested data of Cogo Points. I need to get them into a spreadsheet.
I have tried exporting a .shp file and opening the .dbf file in excel, however, it only seems to export the data field of the table and not the value.
I was able to move Cogo points onto an existing line or polyline, and retain their existing Z value, rather than changing to 0.00 of the height of the poly line/line.
Is there a variable to change this? Thought it might be "OSNAPZ" but thats already set to 1 and this is still happening.
I am working in a .dwg that i have previously created cogo point in, but now when i try to created cogo points manually, it goes through the prompts, but will not create the point. P.S I am using Civil 3d 2011
View 2 Replies View RelatedI want to try the point inverse report but I am stumped on how to get to this dialog box?
I type 'cogo' and get to a cogo traverse box but nothing shows up about inverse report.
Is there a non-ribbon method?
Im so green at the ribbon that I type "ribbon" but still cant find it.
How to set a default point description to match the point number. I need to match the point number and the point description as per below:
Point # = 1 - Description = 1Point # = 2 - Description = 2Point # = 3 - Description = 3and so on.
Is there a quick way to add this description once the points are already created?
Also, it seem I can't make the default style and label to work. I edited the Feature Setting on the Setting tab of the Toolspace and I made sure there's no child override. When I open the point creation menu, my default styles are there (grayed out), but when I create the points, they pick up another style and another label style.
When I go into 3dorbit, or orbit mode, as I am panning moving around in space I can still see the points. As soon as I press 'Esc' or 'Enter' the points dissapear, how can I get them to stay visible?
View 2 Replies View RelatedIs there an easy way to export Cogo Points with attributes to a text file e.g csv file.
The attached imae shows an example of the Cogo Points I need to export and open in a spreadssheet. I need all the information (not just E,N,Z,D) of the point.
My delima is regarding cogo point readability. I'm used to LDD so this may be the issue. I set a cogo point but I want it to stay in the same orientation. if I use orbit or dview the cogo point data reorients (rotates) to line up horizontally. I would like the data to remain as set originally. I tried changing plan readabilty in label styles but when I drag the point it rotates to the current view orientation. Is there a way to control the rotation once dragged so it does not reorient if I change the orbit or dview?
View 9 Replies View RelatedI have a dwg that looks great in model space, however I created a couple paperspace layouts and then used Align Space to rotate to those views. The problem is that my point label style rotates the point labels based on the align space rotation.
I looked into the point label settings and changed the orientation reference to the World Coord. Sys., but it does not make the points rotate correctly. (world reference is the goal).
Adding a prefix to the end of a cogo point ie.(when we bring in info we have a top of curb and a face of curb shot and we add TC and FC to the text componite editor.) is there a process where i can add this at one time or set civli up to where when it processes the file to recognize them and add this automatically for minimize drafting time?
View 4 Replies View RelatedWe are in the middle of upgrading from LDD2008 to Civil3D2013. This is a 2 part question. Since there are NO point labels similar to Poiint labels in LDD2008. It is making cleaning the elevations up very teadious. With point labels that are just Mtext. I would rotate 1 label and then match properties to rotate the rest and then jiust more the elevations to make them readable.
How do you all deal with cleaning up the elevations? Is there a way to match proprties as far as the rotatiion of the points? or do you Create blocks from Cogo points?
So, I starting playing with the Creating Blocks from Cogo Points. This creates a block with attributes similar to the way Softdesk treated points back in the day. I ran into a couple of issues. 1 being, it rounds the elevation to 3 decimals places.
When it creates blocks from the Cogo Points some of the blocks are giving me 0.000 elevations for points that had actual elevations.
Civil3D 2013
Dell Optiplex 9010
Intel I-7 3770 CPU @ 3.4 Ghz
16 gb RAM, 64 bit