Is there a way for the elevation of surface to be shown in the bottom left corner along with the easting and northing as the cursor tracks over the surface? currently only the easting and northing track with the cursor the elevation remains 0.00
View 4 Replies
Per the attached exhibit, how to get the plot border to cover the entire sheet border instead of just the bottom left corner.
View 1 Replies View RelatedNormally, when you select an object or a group of objects and you go to copy it/them with Ctrl+V (NOT Ctrl+Shift+V), AutoCAN'T will use the bottom left extents of the object(s) as the base point for what you are pasting. For whatever reason, when I select+copy+paste an object, the base point/origin/whatever you want to call it, is way off and not even near any of the objects.
How can I reset this?
Trying to draw a titleblock for a college assignment and its supposed to start at 5,5 but that is in the middle of the paper (A3 setup). 0,0 is somewhere in the middle too - how do i get 0,0 to be the bottom left corner of the paper in paperspace??
View 9 Replies View RelatedI lost the text window that is normally docked on the bottom of the AC screen. I searched and found that F2 brings it up, but I can't find how to have it permanently docked in the bottom left hand corner, where it normally resides. I'm using AutoCad 2002.
View 5 Replies View RelatedYesterday, I went into my presets folder because I was searching for a particular brush, and I noticed a little grey overlay icon with a white line in a 45 degree angle. The little icons sit on top of the presets icons, and they are located to the bottom left hand corner. I tried to search what that means, with no luck. Just in case, I even checked everything with my antivirus, but it doesn't seem to be a virus. What is that? (I'm running Adobe CS6, in a Windows 7 Ultimate, 64 bit pc)
View 8 Replies View RelatedI have blocks forming a column, and I need to allow the user to select the top block of the column but return the bottom left corner of bounding box of the bottom block in the column.
(DEFUN NXT-INSPNT (/ BLKLST CURENT CUROBJ IDX IPNT MCMD NENT SEL SS VENT) (PROMPT "
>> Pick the Category HEADER to add note:") (SETQss nilss (SSGET ":E:S" (LIST (CONS 0 "INSERT"))) )
(IF ss (PROGN (SETQ sel (ENTGET (SSNAME ss 0)) iPnt (CDR (ASSOC 10 sel)) )
(princ iPNT) (setvar "attreq" 0) (VL-CMDF "-INSERT" "LEG-NOTE" "S" 1 iPnt 0 PAUSE)
[Code] ....
I'm not exactly sure where my code is failing but I get the following error.
error: AutoCAD.Application: Null extents
how to restore the Color Eyedropper tool at the bottom left corner for some reason it completely disappeared.
View 8 Replies View RelatedI have a project I designed and grading plan is almost done. My proposed surface lables read as 1256.50. How can I get them to read just 56.50? I have a FG surface I created and am labeling using surface elevations. I am running out of room and need to free up some space. I don't want do drop my surface 1200'.
View 3 Replies View RelatedI'm trying to determine if it's possible to take a 09 LDD Companion drawing in which the elevations for many points have been moved AND/OR rotated (to align with roadway), and not only convert these to C3D, but also have them transferred along with the move/rotate information. We're talking about a mile long stretch of roadway and the project is 6 years old (i.e. no C3D when it was originally done).
The problem is that there are a ton of ground shots that need only be shown to 0.1 precision but are shown to 0.01 precision. LDD was not able to assign an elevation precision to groups of points, only all cogo points together, which meant we had to explode certain groups of "soft shot" points once they had been inserted at the desired precision.
If there's no way to do what I'm asking, it's no big deal for this case since the higher precision can be easily rounded to the lower by the viewer (better than the other way around). But as I am the only one on C3D and have been for the past 2 and a half years, we will likely face this monster again several times over with other drafters' projects and I'd like to have a best practice in place if we need to go the other way (extracting 0.01 precision from 0.1 precision).
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
I want to color cut/fill using red/greens schemes.
I want to use "interval with datum" method, and 2' intervals.
That gives like 20 rows for cut and fill, and so c3d applies one red to 5 rows, then next red to another 5, and so on.
I could pick colors by hand, but that dumb dialog is so slow, and its not easy to visually pick a nice gradation.
Is there no way to say "step from this color to that"?
Even when I do get all set up, I am finding performance of displaying the 2d solids takes forever.
I obviously have a large surface, but that is why we pay for good software right?
I am on c3d 2012 on a fast 64 bit win 7 machine. [URL]
C3D 2012 SP3 on Win 7 Pro:
I have an alignment with horizontal PVI points that are coincidental with COGO points. I want to display in a profile view, a surface elevation at the alignment PVI points in a band style. Is it possible to do this? If so, how?
This may be a silly question but what is the big A in the upper left corner?
View 6 Replies View RelatedAfter closing and reopening my command prompt, I find that it is now at the bottom left of the screen and no longer part of the main graphics window. How can I get it to display at the bottom of the main display?
View 9 Replies View RelatedI have to make it possible to insert table by choosing any of it's corners. I cannot get it to work with choosing bottom corners - I can't get the exact height of the table.
The sample code of the one-row table is:
acApp.Document doc = acApp.Application.DocumentManager.MdiActiveDocument;Editor ed = doc.Editor;Transaction tr = ed.Document.Database.TransactionManager.StartTransaction();try{ BlockTable bt = (BlockTable)tr.GetObject(doc.Database.BlockTableId, OpenMode.ForRead); Table tb = new Table(); tb.InsertColumns(0, 24, 1); tb.SetRowHeight(4); tb.Columns[0].Width = 24; tb.Columns[1].Width = 24; tb.Cells[0, 0].TextHeight = 2; tb.Cells[0, 0].TextString = "some text"; tb.Cells[0, 0].Alignment = CellAlignment.MiddleRight; tb.Cells[0, 1].TextHeight = 2; tb.Cells[0, 1].TextString = other_text_from_variable; tb.Cells[0, 1].Alignment = CellAlignment.MiddleCenter; tb.HorizontalCellMargin = 0; tb.VerticalCellMargin = 0; tb.GenerateLayout(); tb.Position = // exactly... what should I do here? BlockTableRecord btr = (BlockTableRecord)tr.GetObject(bt[BlockTableRecord.ModelSpace], OpenMode.ForWrite); btr.AppendEntity(tb); tr.AddNewlyCreatedDBObject(tb, true); tr.Commit();}catch (Autodesk.AutoCAD.Runtime.Exception ex){ ed.WriteMessage("
ERR: " + ex.Message);}finally{ tr.Dispose();}
Now... I'm trying to make 1-row table width the height 4. I should set tb.Position by just subtracting 4 from the Y-value of the clicked point... NOT.
tb.Height gives me 4. But I get the table with height 5.667. And I can't just use that value for subtracting, because even then, bottom-right corner is about 0.2 above or below clicked point... (X-value is correct and equals the clicked point's X-value.)
The same thing happens when I insert a table with the number of rows depending on the number of the records selected from DB. The same thing happens, when I use obsolete .NumRows and .NumColumns. What am I missing?
In the upper right hand corner of most auto cad applications post dating 2012, perhaps predating as well, there is an option to select 3d views and a UCS. The scope of my job dose not include 3D, and this option only gets in the way. Is there any way to remove this from my view?
View 5 Replies View RelatedWonder if can Can Image stretch from left or right or top or bottom side instead of diagonal ?
Reason is picture or tiff not correct length to the object of build.
I did scale to right length on "X" but the "Y" is off so how ?
I know that in Photoshop have stretch all side whatever I want but not in autocad 2011
what are the 2 gray boxes in the upper left corner of my documents? are they new in ps7? one has the number one in it and the other looks like an envelope.
View 2 Replies View RelatedI'm running PS CS3 on Mac iBook with 10.5.8
I've been using this setup for years & have always been able to drag out the right bottom corner to increase the grey space round an image so i can transform better or what ever. But now when I try to drag out that corner the image window flinches slightly & a line appears around the image which disapears when I let go.Also when I try to expand the layers palette down by dragging it's lower right cornes so I can see more layers nothing happens, there is no stripey corner marks on that corner & when i try click & try to drag nothing happens.
I need to remove the person at a bottom right corner of the picture. Need replacing him with a floor and walls.
View 9 Replies View RelatedI have a series of sheets, each with two viewports to show two plan views of a long road alignment. I arranged them to read bottom to top, as it goes up stationing, as we do with cross section sheets, but have been told by an outside reviewer that the sheets are confusing and should read top down.
How would you arrange them?
I've been using photoshop CS6 since it came out of beta, and I've been happy with 99% of the interface changes, except for some of the the new tool cursors which now have arrows in the upper left corner. I've been meaning to post this a while ago, but it seemed that the forums were offline.
One example is the crop tool, but what mainly hinders me are the lassos and paint bucket cursor icons. Is there any way I can replace those with the original ones from cs5 and prior?
When you pick up a tool, and it has an icon of an object (i.e. a lasso), your instinct is to look at and use the tip of that object, not some little black arrow in a corner.
For example, you wouldn't want to have an arrow next to your text cursor, or next to your magic wand cursor, would you? You'd want to use the tip of the wand.
I'm not sure what part of the user community suggested these little arrows be added on those tools, but I find it to be a bad design idea. And it's an annoying choice imo, beacause it doesn't make sense from an interaction design point of view, and not because it would be hard for me to get wrid of my habit of using the tip of the lasso, and to get used to the arrow instead. It's bad, because now, there are two conflicting pointers in the same tool: the icon tip and the arrow tip.
[EDIT] I'm sure people will say that they prefer the new design, arguing about "design consistency" and whatnot. So this is why I ask if there's a way for me to replace the cursors in my photoshop, not everyone's.
(XDPX9) - Can't seem to get it to react. I followed both variations of how it's done...
1. Drag the adjoining X & Y at the top left corner of the ruler.... dragged down. Nothing.
2. Page properties - Grid and ruler tab... changed the Y Coordinate. Nothing again.
Made sure 'page' is not 'locked'. All pages same size. Been at it for over an hour and have decided I'm either missing something or maybe I found a bit of a bug?
My page is 'custom' size.... Landscape 1000X600
I need the x, y origin point to be in the lower left corner. In the past I was able to go into the Adobe Illustrator setting and change some code so when I double clicked in the left corner of the ruler it would switch my origin to lower left. Now there is nothing in the setting folder because this program is on the cloud.
View 2 Replies View RelatedIs this a bug? Why can't I reposition the grid lines from the top left corner?
Things are looking wacky. [URL]....
My work bought me a huge new Thunderbolt monitor yesterday, so I took advantage of the real estate and expanded my Layers palette to be very tall, and along with several other adjustments, saved this out as a custom workspace. Today though I am working only on a laptop offsite with no Thunderbolt and the bottom of the Layers palette is offscreen where I can't get to it. I know if I change workspaces to one of the Adobe presets it will give me a standard size Layers palette, but if possible I would like to work within my custom workspace and just change the height of the palette.
View 2 Replies View RelatedI have a square image where I want to erase everything left of a line from bottom left corner to top right corner, so it will be transparent. How's that done easiest?
View 2 Replies View RelatedI recently found out about the 3D features in Photoshop and I started to experiment with them. I've created some nice extrusions. However, when I try to start the render of my current project, it waits a short while and then continues on rendering the rest of the image, leaving a grey box in the upper-left corner. When I zoom in, I can see that the texture is in place and the box starts at the border of the 3D object, not at the border of the image.
I'm running Windows 7 Home Premium x64, Intel i5-2430M (2.4 GHz), nVidia GeForce GT555M (1 GB) and 8 GB of RAM. I've rendered my other projects successfully with the same settings (all highest quality, though very slow). Could this possibly be a bug in the software, is it an error of mine or is this 3D document just irrenderable?
The dialog box for "Adjust/Highlight-midtone-shadow" has become "locked" at the very top-left corner of my monitor screen.
It's top "grab-bar" and "shadows-value-field" are outside the edges of my monitor.
I cannot "grab" it with my mouse cursor to relocate it. How can I move it into the visible area of my monitor?
I have opened an image in photoshop and when I choose "image size", it says that the image has a resolution of 72 pixels/inch ( it's a five x eight image..)
But in the bottom of image, it says 680.1K/680.1K.
My stats are being show, but the text is yellow....very difficult to see against a light background. I haven't been able to find a place to change the text color.
View 1 Replies View Related
