AutoCad :: Text Window - Permanently Docked It In Bottom Left Hand Corner
Jun 9, 2011
I lost the text window that is normally docked on the bottom of the AC screen. I searched and found that F2 brings it up, but I can't find how to have it permanently docked in the bottom left hand corner, where it normally resides. I'm using AutoCad 2002.
Normally, when you select an object or a group of objects and you go to copy it/them with Ctrl+V (NOT Ctrl+Shift+V), AutoCAN'T will use the bottom left extents of the object(s) as the base point for what you are pasting. For whatever reason, when I select+copy+paste an object, the base point/origin/whatever you want to call it, is way off and not even near any of the objects.
Trying to draw a titleblock for a college assignment and its supposed to start at 5,5 but that is in the middle of the paper (A3 setup). 0,0 is somewhere in the middle too - how do i get 0,0 to be the bottom left corner of the paper in paperspace??
Is there a way for the elevation of surface to be shown in the bottom left corner along with the easting and northing as the cursor tracks over the surface? currently only the easting and northing track with the cursor the elevation remains 0.00
I have opened an image in photoshop and when I choose "image size", it says that the image has a resolution of 72 pixels/inch ( it's a five x eight image..)
But in the bottom of image, it says 680.1K/680.1K.
When I add a image to my background my background shrinks to the top left hand corner of canvas. I have been trying to do this every night for a week now and held out posting until I gave up. Also when I try to paste an image I get a message saying I don't have enough memory (I have 20 GB of memory free). I tried to find Pleska plugin for adding from file but could not find it.
Yesterday, I went into my presets folder because I was searching for a particular brush, and I noticed a little grey overlay icon with a white line in a 45 degree angle. The little icons sit on top of the presets icons, and they are located to the bottom left hand corner. I tried to search what that means, with no luck. Just in case, I even checked everything with my antivirus, but it doesn't seem to be a virus. What is that? (I'm running Adobe CS6, in a Windows 7 Ultimate, 64 bit pc)
I have blocks forming a column, and I need to allow the user to select the top block of the column but return the bottom left corner of bounding box of the bottom block in the column.
(DEFUN NXT-INSPNT (/ BLKLST CURENT CUROBJ IDX IPNT MCMD NENT SEL SS VENT) (PROMPT " >> Pick the Category HEADER to add note:") (SETQss nilss (SSGET ":E:S" (LIST (CONS 0 "INSERT"))) ) (IF ss (PROGN (SETQ sel (ENTGET (SSNAME ss 0)) iPnt (CDR (ASSOC 10 sel)) ) (princ iPNT) (setvar "attreq" 0) (VL-CMDF "-INSERT" "LEG-NOTE" "S" 1 iPnt 0 PAUSE)
[Code] ....
I'm not exactly sure where my code is failing but I get the following error.
im having an issue with my site Headphone Styles, I'm trying to extract the logo at the top left hand corner and edit in photoshop. if this image file extension is compatible with photoshop?
I have a modeled right hand part and a detail drawing of that right hand part with a pin that defines r.h from l.h. and I would like to save them as a left hand part then change the model by reversing the pin. How would I proceed with this task?
My stats are being show, but the text is yellow....very difficult to see against a light background. I haven't been able to find a place to change the text color.
I want to extract all the texts in a illustrator file to a txt file. which could be done like this:
var docObj=app.activeDocument; var tfObj=docObj.textFrames; var myTextFrames = []; for(var m=0; m < tfObj.length; m++){ myTextFrames.push(tfObj[m].contents); }
But since the text frames were extracted by create order, not by layout, I want to ajust the oder from top left to bottom right first, then export.
I thought it could be done by selecting all the text frames first, then sorting the selection orders by loop. But I don't know how to select all the text frames, and not sure whether this is the right way...
In Photoshop CS6 if one wants to use floating document windows (I don't care for tabs) the opened image cannot be moved around the interface. If you drag the image the document window snaps back to where you moved it from plus some amount to the left. Eventually if you keep trying to drag it to a new location it will move all the way to the left side of the screen and will snap back there when you try to move it. I often like to have several images up at once as I do comps and I am very disappointed that such a major interface issue made it through testing un-noticed.
This happens on both my laptop PC and my Desktop. Both Windows 7 64bit pro machines and each have 8G of ram. Desktop has Nvidia graphics and the laptop has Intel graphics. Happens in both 32 and 64 bit versions of windows.
I have to make it possible to insert table by choosing any of it's corners. I cannot get it to work with choosing bottom corners - I can't get the exact height of the table.
Now... I'm trying to make 1-row table width the height 4. I should set tb.Position by just subtracting 4 from the Y-value of the clicked point... NOT.
tb.Height gives me 4. But I get the table with height 5.667. And I can't just use that value for subtracting, because even then, bottom-right corner is about 0.2 above or below clicked point... (X-value is correct and equals the clicked point's X-value.)
The same thing happens when I insert a table with the number of rows depending on the number of the records selected from DB. The same thing happens, when I use obsolete .NumRows and .NumColumns. What am I missing?
I have created an ipart and want to create a right hand and left hand option of that part. I can mirror the features involved and suppress the mirror feature for the the RH part and so the RH version looks fine.
BUT if the mirror feature for the LH version is in the compute state I get both handing showing. How do I suppress one handing and leave the other for my RH version.
photoshop CS2 stoped displaying the red channel correctly on all images. The red channel displays very muted color.
After deleting all preferences of CS2, cleaning out the Windows registry, and upgrading to CS3 the problem still remains.
In CS3 however, the color shift goes away if I drag the image outside of Photoshop's main window.
I have a screenshot of this, http://www.miats.com/tmp/PhotoshopIssue.jpg
Photoshop states that both of the large images are solid R:255 G:0 B:0. However, after print screening the images and pasting them back into Photoshop, it shows that the one on the left is actually R:201 G:88 B:34.
The same thing happens for green and blue as well, though the difference is much less dramatic.
I don't remember changing any settings and my laptop (Win XP, CS2) does not have this problem when loading the same images.
My computer is running VISTA 32bit with 3GB of ram. The graphics card is a NVIDIA 6800.
In the upper right hand corner of most auto cad applications post dating 2012, perhaps predating as well, there is an option to select 3d views and a UCS. The scope of my job dose not include 3D, and this option only gets in the way. Is there any way to remove this from my view?
The minimize, restore down, & close icons keep disappearing from the upper right hand corner on my current drawing file in 2013 LT. They will reappear once I re-zoom the drawing. Is there any way to keep these icons on the screen at all times?
what are the 2 gray boxes in the upper left corner of my documents? are they new in ps7? one has the number one in it and the other looks like an envelope.
I've been using this setup for years & have always been able to drag out the right bottom corner to increase the grey space round an image so i can transform better or what ever. But now when I try to drag out that corner the image window flinches slightly & a line appears around the image which disapears when I let go.Also when I try to expand the layers palette down by dragging it's lower right cornes so I can see more layers nothing happens, there is no stripey corner marks on that corner & when i try click & try to drag nothing happens.
I've been using photoshop CS6 since it came out of beta, and I've been happy with 99% of the interface changes, except for some of the the new tool cursors which now have arrows in the upper left corner. I've been meaning to post this a while ago, but it seemed that the forums were offline.
One example is the crop tool, but what mainly hinders me are the lassos and paint bucket cursor icons. Is there any way I can replace those with the original ones from cs5 and prior?
When you pick up a tool, and it has an icon of an object (i.e. a lasso), your instinct is to look at and use the tip of that object, not some little black arrow in a corner.
For example, you wouldn't want to have an arrow next to your text cursor, or next to your magic wand cursor, would you? You'd want to use the tip of the wand.
I'm not sure what part of the user community suggested these little arrows be added on those tools, but I find it to be a bad design idea. And it's an annoying choice imo, beacause it doesn't make sense from an interaction design point of view, and not because it would be hard for me to get wrid of my habit of using the tip of the lasso, and to get used to the arrow instead. It's bad, because now, there are two conflicting pointers in the same tool: the icon tip and the arrow tip.
[EDIT] I'm sure people will say that they prefer the new design, arguing about "design consistency" and whatnot. So this is why I ask if there's a way for me to replace the cursors in my photoshop, not everyone's.
(XDPX9) - Can't seem to get it to react. I followed both variations of how it's done...
1. Drag the adjoining X & Y at the top left corner of the ruler.... dragged down. Nothing.
2. Page properties - Grid and ruler tab... changed the Y Coordinate. Nothing again.
Made sure 'page' is not 'locked'. All pages same size. Been at it for over an hour and have decided I'm either missing something or maybe I found a bit of a bug?
I need the x, y origin point to be in the lower left corner. In the past I was able to go into the Adobe Illustrator setting and change some code so when I double clicked in the left corner of the ruler it would switch my origin to lower left. Now there is nothing in the setting folder because this program is on the cloud.