I have created an ipart and want to create a right hand and left hand option of that part. I can mirror the features involved and suppress the mirror feature for the the RH part and so the RH version looks fine.
BUT if the mirror feature for the LH version is in the compute state I get both handing showing. How do I suppress one handing and leave the other for my RH version.
I have a modeled right hand part and a detail drawing of that right hand part with a pin that defines r.h from l.h. and I would like to save them as a left hand part then change the model by reversing the pin. How would I proceed with this task?
View 3 Replies View RelatedI lost the text window that is normally docked on the bottom of the AC screen. I searched and found that F2 brings it up, but I can't find how to have it permanently docked in the bottom left hand corner, where it normally resides. I'm using AutoCad 2002.
View 5 Replies View RelatedMy left hand menu is missing?? How do I get it back? Ive tried pressing tab and F but still nothing.
View 2 Replies View RelatedI'm on CS6 on a year old iMac. Plenty of RAM and memory. For some reason all of a sudden, the tools on the left hand side of the screen won't work. All I get is the hand. What I hit or what happened. I've re-started PS, the computer and reset Bridge. How to reverse what happened?
View 2 Replies View RelatedI have opened an image in photoshop and when I choose "image size", it says that the image has a resolution of 72 pixels/inch ( it's a five x eight image..)
But in the bottom of image, it says 680.1K/680.1K.
I recently upgraded from ps elements 10 to 12 and have noticed that all of my albums from 10 have disappeared, but to the lower right of each photo thumbnail there is a red album icon, and if I hang my mouse over it, it tells me what album it is in, but the album isn't listed on the left of the screen. I really do not want to recreate these albums, as it would be almost impossible. I am dealing with over 2000 photos over several years (downloaded from discs from the last several years). I need to have these albums back to print, delete, edit, share.
View 6 Replies View RelatedI am currently working with a trial version of Lightroom 4.2 and i have been doing some silly things. The end result is that Catalog has disappeared from the left hand panel of the library tab ie i only see Folders, Collections and Publish Services..
I have tried to use File/New Catalog, Open Catalog and Open Recent but, in each case, I get an error box appearing: " ....catalog address refers to a location that is not available" it does not close and re-open LR
Now for the confession as to how this situation arose. I had been using LR quite happily using the catalogue which was automatically created when i started. Then I decided to try creating a new catalogue, in fact I ended up creating a few new catalogues. I decided to remove all the catalogues and start again with one catalogue which I would set up (I was not worried about losing the updates to the photos i had been playing around with) But, as i could find nothing within LR about deleting catalogues, I decided to remove them via Windows Explorer. When i went back into LR, Catalog was still showing in the left hand panel and, when i looked in Explorer, it was in the original folder My Pictures/Lightroom which I thought i had deleted along with all the other catalogues. Presumably it had been re-created automatically as in my original use of LR
I then compounded my mistakes by clicking on the + to the right of Catalog and, for interest, choosing whatever was at the top of the resultant list. It was at this point that Catalog disappeared never to be seen again.
My lr4 doesn't have a folders panel on the left hand side. Is the software defective or is it hidden?I just lost all my images!
View 3 Replies View RelatedI attached a photo of the project i am working on. Im trying to figure out how to create the roof on the left hand side of the taller area. It should be a arched roof just like the others except it is also rounded.
View 3 Replies View RelatedWhen I add a image to my background my background shrinks to the top left hand corner of canvas. I have been trying to do this every night for a week now and held out posting until I gave up. Also when I try to paste an image I get a message saying I don't have enough memory (I have 20 GB of memory free). I tried to find Pleska plugin for adding from file but could not find it.
View 8 Replies View Relatedim having an issue with my site Headphone Styles, I'm trying to extract the logo at the top left hand corner and edit in photoshop. if this image file extension is compatible with photoshop?
View 4 Replies View RelatedHere is my situation: I want to draw a vertical line on the left-hand side of my workspace about an inch away (to the right) from the left edge. Then I want to fill up that inch-wide column with a particular color. The end result being that I will have an inch-wide bar of color running vertically down the left side of my project.
I know this is probably really easy to do but it's been a long time since I had a course in Photoshop.
I use PSE 6.
I am having trouble getting my presets to show up under presets on the left hand side of the screen. They are still in develop presets but there not showing up and Ive tried deleting them and adding them again then closing out of lightroom 4 and going back in but I can not seem to get them to show up again. I must have hit something but there not showing up again
View 2 Replies View RelatedHow do I change the BOM structure of iParts from Normal to Purchased? The BOM editor in the assemblies that use the iParts have the iParts as read only. I can't find a way to change them to purchased from inside the iPart either.
View 3 Replies View RelatedIs there a way to add an iPart column to the iPartTableColumns collection? I'm using Inventor 2009.
View 5 Replies View RelatedI've made a component pattern in an assembly using an iPart. The iPart as several different lengths, but I cannot switch lengths in the assembly. In other assemblies, right clicking on the Table icon allows me to change lengths, but this assembly will not.
View 2 Replies View RelatedIn C++ can I use this function, using the key index Member string to select which row in the factory I want to insert?
In the docs all I see is Use an iPartTableRow (but no examples in C++).
Use an index, this works but I need to know the index before using it.Use a set of parameters in a string (but "[Member=142314]" does not seem to work. Can I not simple use a string with the appropriate member?
its possible to UN-author an iPart?
View 7 Replies View RelatedI want to insert a row which contains data into iPart as new part member but without using excel.
View 3 Replies View RelatedHow do I rename an iPart member name? Can I use Design Assistant?
View 2 Replies View RelatedCan I use diferrent types of threads (as variants), in one iPart/iFeature file, ex. M10x1.5 (ISO Metric profile) and G1/8" (ISO Pipe Threads)? Look at the file in attachment and correct it if possible.
View 2 Replies View RelatedIs it possible to add a Appearance tab to a Ipart table? I am cataloging a set of parts and one part is made with steel but in Gloss - Black and Matte - Black and i'd like to differentiate the 2 without haveing to make 2 seperate Ipart files.
View 2 Replies View RelatedI have listbox that shows ipartname of one ipartfactory it would like and me that when selecting one of them it could send to the assembly ipart selected hear show code.
Dim InvApp As Inventor.ApplicationSet InvApp = GetObject(, "Inventor.Application") Dim IpartSeleccion As ipartMemberSet IpartSeleccion = listbox1.Value Dim oDoc As AssemblyDocumentSet oDoc = InvApp.ActiveDocument Dim oOccs As ComponentOccurrencesSet oOccs = oDoc.ComponentDefinition.Occurrences
[Code] ........
I have an ipart but I can't for the life of me get them to be in order, small to big in the browser.
I have them in order in the table but they are mixed up in the browser.
Is there a way to do this.
see attached picture
I'm trying to take multiple parts of the same type and make them into one .ipt I began doing this and It seemed to be working fine. When I put those grouped .ipts into an .iam, Inventor creates a Subfolder of each .ipt and fills it with each part from that group and now those created ipts are unique unlinked parts (unlinked to the group ipt). I'm trying to reduce our file count and link our .ipts and .idws/.dwgs so this Inventor file creator results in the opposite of what I'm looking for. My question now is is there any way to modify this process to work the way I need it to or is there a completely different way that I should be doing this?
View 4 Replies View RelatedHow can I get the iPart information in a partlist.
I have a tupe DN 25 iPart where I can control the length, and i'll like to have a text I description field in my partlist that says "DN 25, Length = <actual length>".
the newest model I have made I have run into some troubles. When I switch between one member and another most parameters update correctly but the part is still requiring an update before the finished part is created.
When the feature small sheds is enabled the pattern isn't working correctly.It seems as though the height that controls the sheds is not updating during the member change process and is causing the pattern to be the wrong length.
I have set up a form to add my parameters as there are a large number in the ipart table.I can't generate my member files as they show the member before it is updated and is wrong.
Is it possible to show surfaces in a drawing view of an ipart member - although the option of include all surfaces is there I can't get them to show. Similar issue with showing sketches - get model sketches is there but nothing can be shown.
View 2 Replies View RelatedI need an ipart for helical gear.
View 9 Replies View RelatedI have used ipart to create multiple members in casting & machining.but, i have face problem how to link members in that file. For example i will open 4 member in machining it will automatically refer 4 member in casting. How to link these fille.
please find the attached file for details.
