I have used ipart to create multiple members in casting & machining.but, i have face problem how to link members in that file. For example i will open 4 member in machining it will automatically refer 4 member in casting. How to link these fille.
please find the attached file for details.
I have facing issue to link the ipart members in to the new part.
for example, i have one machining part that machining part showing make from number. so, i created make from first. it has 10 instance.using iPART i created 10 members.after that i need to be do the machining.machining drawing also having 10 members. How i call the each make from members in to the machining model.
I am looking to generate ipart members for each ipart as I activate it?
View 2 Replies View Relatedis it possible to show all files from a folder with external links in a listbox? Is it possible to check if the link is OK?
View 1 Replies View RelatedI have several assemblies where I've linked parameters between sketches. I need to copy some of these files for re-use in other un-related assemblies. What is the best way to break the link between the files? They are going to be used in the same project.
View 8 Replies View RelatedI have never seen this before we implemented vault. But, this could be a inventor related issue. In vault collaboration 2012 we use a single project file for all projects. The ipj file is checked into vault. We keep a unchecked-out copy in the working folder. By the end of the day I must I started and closed inventor several times. I notice that there are several copies of shortcut link (lnk) files to the ipj file created in the same location as of ipj file.
Inventor Professional 2013
Vault Collaboration 2013
How do I change the BOM structure of iParts from Normal to Purchased? The BOM editor in the assemblies that use the iParts have the iParts as read only. I can't find a way to change them to purchased from inside the iPart either.
View 3 Replies View RelatedIs there a way to add an iPart column to the iPartTableColumns collection? I'm using Inventor 2009.
View 5 Replies View RelatedI've made a component pattern in an assembly using an iPart. The iPart as several different lengths, but I cannot switch lengths in the assembly. In other assemblies, right clicking on the Table icon allows me to change lengths, but this assembly will not.
View 2 Replies View RelatedIn C++ can I use this function, using the key index Member string to select which row in the factory I want to insert?
In the docs all I see is Use an iPartTableRow (but no examples in C++).
Use an index, this works but I need to know the index before using it.Use a set of parameters in a string (but "[Member=142314]" does not seem to work. Can I not simple use a string with the appropriate member?
its possible to UN-author an iPart?
View 7 Replies View RelatedI want to insert a row which contains data into iPart as new part member but without using excel.
View 3 Replies View RelatedHow do I rename an iPart member name? Can I use Design Assistant?
View 2 Replies View RelatedCan I use diferrent types of threads (as variants), in one iPart/iFeature file, ex. M10x1.5 (ISO Metric profile) and G1/8" (ISO Pipe Threads)? Look at the file in attachment and correct it if possible.
View 2 Replies View RelatedI have created an ipart and want to create a right hand and left hand option of that part. I can mirror the features involved and suppress the mirror feature for the the RH part and so the RH version looks fine.
BUT if the mirror feature for the LH version is in the compute state I get both handing showing. How do I suppress one handing and leave the other for my RH version.
Is it possible to add a Appearance tab to a Ipart table? I am cataloging a set of parts and one part is made with steel but in Gloss - Black and Matte - Black and i'd like to differentiate the 2 without haveing to make 2 seperate Ipart files.
View 2 Replies View RelatedI have listbox that shows ipartname of one ipartfactory it would like and me that when selecting one of them it could send to the assembly ipart selected hear show code.
Dim InvApp As Inventor.ApplicationSet InvApp = GetObject(, "Inventor.Application") Dim IpartSeleccion As ipartMemberSet IpartSeleccion = listbox1.Value Dim oDoc As AssemblyDocumentSet oDoc = InvApp.ActiveDocument Dim oOccs As ComponentOccurrencesSet oOccs = oDoc.ComponentDefinition.Occurrences
[Code] ........
I have an ipart but I can't for the life of me get them to be in order, small to big in the browser.
I have them in order in the table but they are mixed up in the browser.
Is there a way to do this.
see attached picture
I'm trying to take multiple parts of the same type and make them into one .ipt I began doing this and It seemed to be working fine. When I put those grouped .ipts into an .iam, Inventor creates a Subfolder of each .ipt and fills it with each part from that group and now those created ipts are unique unlinked parts (unlinked to the group ipt). I'm trying to reduce our file count and link our .ipts and .idws/.dwgs so this Inventor file creator results in the opposite of what I'm looking for. My question now is is there any way to modify this process to work the way I need it to or is there a completely different way that I should be doing this?
View 4 Replies View RelatedHow can I get the iPart information in a partlist.
I have a tupe DN 25 iPart where I can control the length, and i'll like to have a text I description field in my partlist that says "DN 25, Length = <actual length>".
the newest model I have made I have run into some troubles. When I switch between one member and another most parameters update correctly but the part is still requiring an update before the finished part is created.
When the feature small sheds is enabled the pattern isn't working correctly.It seems as though the height that controls the sheds is not updating during the member change process and is causing the pattern to be the wrong length.
I have set up a form to add my parameters as there are a large number in the ipart table.I can't generate my member files as they show the member before it is updated and is wrong.
Is it possible to show surfaces in a drawing view of an ipart member - although the option of include all surfaces is there I can't get them to show. Similar issue with showing sketches - get model sketches is there but nothing can be shown.
View 2 Replies View RelatedI need an ipart for helical gear.
View 9 Replies View RelatedAfter I place an iPart into an assembly, how can I change from one configuration to another?
View 1 Replies View RelatedHaving this issue with IE9? I have a table driven iPart that has an expression in the description field. The expression is =PL <THICK> x <WIDTH>, so that as the thickness and width change the description of this plate also changes. I have recently added rows to this part for the use of bar instead of plate on certain shapes. In order for the bar description to match standard steel shape nomenclature the expression on these parts needs to be =BAR <WIDTH> x <THICK>. How can I add the description to the iPart table so that I can simply edit the bar parts to be as needed?
Some things to note:
1.) These are custom iParts so when the item is inserted you select the thickness, file name, save location, etc.
2.) There are about 705 lines to this iPart right now and I would prefer not to go higher.
3.) I would like to keep these as the same iPart instead of having two different files.
4.) I need the description to be an expression because long after these parts are placed, they sometimes change and I need the dimensions to update after the fact like all our other parts (so don't forget that these one won't and then the drawings are incorrect).
Inventor Professional 2013 (SP-2.3), Product Design Suite Ultimate
Desktop: Intel Core i7 3.4GHz, 16.0 GB RAM, Windows 7 Ultimate SP-1, 64-bit OS, (2) GeForce GTX 580 (331.81), Space Pilot Pro (3.16.1)
Laptop: Intel Core i7 3.9GHz, 16.0 GB RAM, Windows 7 Pro SP-1, 64-bit OS, GeForce GTX 780 (331.81), SpaceNavigator (3.17.7)
When I create a configuration in one iPart, I have one Extrusion’s sketch link to another supressed Extrusion and cause problem.
Can I supress sketch in iPart ?
If I can suppress that sketch and I think the problem will be solved.
I am experiencing a crash when I try and place an ipart (any of them) into a new drawing. The open file box works but when the base view is placed in the drawing it has an unexpected problem and crashes.
Is this a documented problem , and a hotfix is forthcoming or is this just me and something local to my installation. Normally my install is very stable.
I have been trying to create an ipart. Once the ipart is created i am un-able to edit the sketches of features with issues.
I need to modify a sketch and to create an alternate sketch (suppress/unsuppress) but get an error message when i try to edit the sketch.
Windows 7 64 bit
Inventor 2012 Professional
Dell T1600 CPU E31245 @ 3.30GHz
8 GB RAM
I am having a problem with an iPart. I created a rectangular patern in an iPart. When I place the member of the iPart in the Assembly file the pattern is not there. I need it to constrain another part to it.
View 4 Replies View RelatedI have been able to create an upright with slots and holes to the length of 29-1/4" and via two seperate cut extrusions cause the part to shorten using iParts. I was told that the Frame Generator uses the parameter of G_L to populate the new cut length for use with the parts list. I have been able to create a frame generated part and get the length to populate the parts list however I have not been able to get my upright cut length to show in my parts list.
I did create a new property in my parts list column chooser, my BOM is set to Phantom, my .ipt parameters has a user parameter of G_L/equation of Length which above is listed as 29.25 in. Every thing that I can think of is the same from my frame generated files to my upright files.
Right now my parts list will not even show quantities of any kind. How to get parts list to show the cut length?
I have a sheet metal part that I converted into an iPart and I set up different rows with different sheet metal styles. What I want to do is run an iLogic code to change to a specific row which in turn would change the actual material of that sheet metal part....I've tried the snippet iPart.ChangeRow but cannot get it to run the code. I'm not sure if I'm not doing something right or what...
Inventor 2014, Windows 7, 64 bit