AutoCAD Inventor :: G_L To List Cut Length Of IPart
Oct 24, 2008
I have been able to create an upright with slots and holes to the length of 29-1/4" and via two seperate cut extrusions cause the part to shorten using iParts. I was told that the Frame Generator uses the parameter of G_L to populate the new cut length for use with the parts list. I have been able to create a frame generated part and get the length to populate the parts list however I have not been able to get my upright cut length to show in my parts list.
I did create a new property in my parts list column chooser, my BOM is set to Phantom, my .ipt parameters has a user parameter of G_L/equation of Length which above is listed as 29.25 in. Every thing that I can think of is the same from my frame generated files to my upright files.
Right now my parts list will not even show quantities of any kind. How to get parts list to show the cut length?
View 1 Replies
ADVERTISEMENT
Nov 15, 2012
I created a inventor part by name "011-03-054-A-25x50 HS" 100mm in length. Used "011-03-054-A-25x50 HS" in a assembly and used the same part in another assembly. Then I created a ipart with a different length which is 250mm. Now I want to use 250mm length in the second assembly. How do I doit? I couldn't find an answer any where. I am using Autodesk Inventor 2013 in windows 7.
This was called configrations in Solidworks and was very easy to use.
View 2 Replies
View Related
Feb 21, 2012
In a simple case I have an extrusion with some attached seals/weather stripping, all implemented as iParts having their own LENGTH parameters.
RailPart.ipt, Seal_A.ipt, Seal_B.ipt
The goal is to encapsulate these IParts within an iAssembly: RailAssy.iam, where a LENGTH parameter can be input when the iAssembly is placed, causing RailPart and Seal_A to have their length parameters set to the LENGTH provided at that time and SEAL_B having Length set by an iLogic rule to LENGTH - 5.
I've been unable to set up a Custom Parameter Column in an iAssembly table. Is this even permitted?
Inventor Premium 2012 SP1
View 5 Replies
View Related
Jul 8, 2013
I have a form with a multi value selection containing name vaules from an iPart.
I want to make a selection from the field in my form and swap out my iPart in the assembly for my selection.
I thought that something like:
Dim iFactory As String
MulitValue.SetListInComponent ("FileName:1", "Param name", "list of params.......")
Parameter("FileName:1", Param name") = "PK 407" 'could be any thing selected from the list of params..
iFactory=Param name
iPart.ChangeRow("iPart Factory File Name:1", iFactory)
Such that the part would be swaped out for what ever Param name = as a result of user selection.
I get the following error from this: Object reference not set to an instance of an object.
View 1 Replies
View Related
Jun 7, 2013
I use my parts list to generate a total length in inches of the same part that is used in several places in my assemblies. I then export it to excel, convert it to feet, etc. I've been doing this for some time now and it works great. The problem I am now having is I forgot how I got this magic to happen and I need to set another part to appear with it's total length in the list. From what I remember I set the QTY column in the parts list to show the length of the part and then I set the parts list to merge the same parts. For the life of me I can't remember how I did this. How this is done correctly?
All of the parts are created by the frame generator if this matters.
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
View 9 Replies
View Related
Mar 1, 2013
In our “Parts list” (or BOM as we call it) on our .idw’s we have field for “LENGTH”. For example, we use round tubing. We would list the cut length of that piece of tube in the “LENGTH” column. As it stands now, we add “LENGTH” as a custom iproperty in the .ipt. Then in the drawing we add that property to the parts list to capture the length. This works fine, but I’m wondering if we can eliminate some steps by capturing the actual dimension from the sketch to automatically populate the “LENGTH” value. Needless to say, this would eliminate room for error (less typing) and will update the value automatically if length is changed or if the part is copied. I suppose the same would apply for “WIDTH” on sheet metal parts... How do I do this?
View 9 Replies
View Related
Feb 27, 2012
When we launch the Area comand the area value is hold in the system variable "area".
What is the system variable that holds the Length value of the selected entity?
View 6 Replies
View Related
Jul 30, 2012
where I can obtain a freeware lisp routine that lists the lengths of all the polylines on a specific layer or within a selection set? I want to avoid list if possible as there are rather a lot of polylines!
View 2 Replies
View Related
Sep 28, 2009
How do I change the BOM structure of iParts from Normal to Purchased? The BOM editor in the assemblies that use the iParts have the iParts as read only. I can't find a way to change them to purchased from inside the iPart either.
View 3 Replies
View Related
Nov 21, 2009
Is there a way to add an iPart column to the iPartTableColumns collection? I'm using Inventor 2009.
View 5 Replies
View Related
Apr 9, 2013
I've made a component pattern in an assembly using an iPart. The iPart as several different lengths, but I cannot switch lengths in the assembly. In other assemblies, right clicking on the Table icon allows me to change lengths, but this assembly will not.
View 2 Replies
View Related
Oct 2, 2013
In C++ can I use this function, using the key index Member string to select which row in the factory I want to insert?
In the docs all I see is Use an iPartTableRow (but no examples in C++).
Use an index, this works but I need to know the index before using it.Use a set of parameters in a string (but "[Member=142314]" does not seem to work. Can I not simple use a string with the appropriate member?
View 2 Replies
View Related
Feb 21, 2012
its possible to UN-author an iPart?
View 7 Replies
View Related
May 17, 2012
I want to insert a row which contains data into iPart as new part member but without using excel.
View 3 Replies
View Related
May 22, 2012
How do I rename an iPart member name? Can I use Design Assistant?
View 2 Replies
View Related
Jan 22, 2012
Can I use diferrent types of threads (as variants), in one iPart/iFeature file, ex. M10x1.5 (ISO Metric profile) and G1/8" (ISO Pipe Threads)? Look at the file in attachment and correct it if possible.
View 2 Replies
View Related
Sep 27, 2012
I have created an ipart and want to create a right hand and left hand option of that part. I can mirror the features involved and suppress the mirror feature for the the RH part and so the RH version looks fine.
BUT if the mirror feature for the LH version is in the compute state I get both handing showing. How do I suppress one handing and leave the other for my RH version.
View 9 Replies
View Related
May 31, 2013
Is it possible to add a Appearance tab to a Ipart table? I am cataloging a set of parts and one part is made with steel but in Gloss - Black and Matte - Black and i'd like to differentiate the 2 without haveing to make 2 seperate Ipart files.
View 2 Replies
View Related
Jan 31, 2012
I have listbox that shows ipartname of one ipartfactory it would like and me that when selecting one of them it could send to the assembly ipart selected hear show code.
Dim InvApp As Inventor.ApplicationSet InvApp = GetObject(, "Inventor.Application") Dim IpartSeleccion As ipartMemberSet IpartSeleccion = listbox1.Value Dim oDoc As AssemblyDocumentSet oDoc = InvApp.ActiveDocument Dim oOccs As ComponentOccurrencesSet oOccs = oDoc.ComponentDefinition.Occurrences
[Code] ........
View 3 Replies
View Related
Nov 22, 2011
I have an ipart but I can't for the life of me get them to be in order, small to big in the browser.
I have them in order in the table but they are mixed up in the browser.
Is there a way to do this.
see attached picture
View 4 Replies
View Related
Nov 2, 2012
I'm trying to take multiple parts of the same type and make them into one .ipt I began doing this and It seemed to be working fine. When I put those grouped .ipts into an .iam, Inventor creates a Subfolder of each .ipt and fills it with each part from that group and now those created ipts are unique unlinked parts (unlinked to the group ipt). I'm trying to reduce our file count and link our .ipts and .idws/.dwgs so this Inventor file creator results in the opposite of what I'm looking for. My question now is is there any way to modify this process to work the way I need it to or is there a completely different way that I should be doing this?
View 4 Replies
View Related
Apr 11, 2012
How can I get the iPart information in a partlist.
I have a tupe DN 25 iPart where I can control the length, and i'll like to have a text I description field in my partlist that says "DN 25, Length = <actual length>".
View 3 Replies
View Related
Feb 1, 2012
the newest model I have made I have run into some troubles. When I switch between one member and another most parameters update correctly but the part is still requiring an update before the finished part is created.
When the feature small sheds is enabled the pattern isn't working correctly.It seems as though the height that controls the sheds is not updating during the member change process and is causing the pattern to be the wrong length.
I have set up a form to add my parameters as there are a large number in the ipart table.I can't generate my member files as they show the member before it is updated and is wrong.
View 1 Replies
View Related
Oct 11, 2012
Is it possible to show surfaces in a drawing view of an ipart member - although the option of include all surfaces is there I can't get them to show. Similar issue with showing sketches - get model sketches is there but nothing can be shown.
View 2 Replies
View Related
Dec 19, 2003
I need an ipart for helical gear.
View 9 Replies
View Related
Mar 13, 2013
I have used ipart to create multiple members in casting & machining.but, i have face problem how to link members in that file. For example i will open 4 member in machining it will automatically refer 4 member in casting. How to link these fille.
please find the attached file for details.
View 1 Replies
View Related
Mar 29, 2012
After I place an iPart into an assembly, how can I change from one configuration to another?
View 1 Replies
View Related
Nov 27, 2011
Having this issue with IE9? I have a table driven iPart that has an expression in the description field. The expression is =PL <THICK> x <WIDTH>, so that as the thickness and width change the description of this plate also changes. I have recently added rows to this part for the use of bar instead of plate on certain shapes. In order for the bar description to match standard steel shape nomenclature the expression on these parts needs to be =BAR <WIDTH> x <THICK>. How can I add the description to the iPart table so that I can simply edit the bar parts to be as needed?
Some things to note:
1.) These are custom iParts so when the item is inserted you select the thickness, file name, save location, etc.
2.) There are about 705 lines to this iPart right now and I would prefer not to go higher.
3.) I would like to keep these as the same iPart instead of having two different files.
4.) I need the description to be an expression because long after these parts are placed, they sometimes change and I need the dimensions to update after the fact like all our other parts (so don't forget that these one won't and then the drawings are incorrect).
Inventor Professional 2013 (SP-2.3), Product Design Suite Ultimate
Desktop: Intel Core i7 3.4GHz, 16.0 GB RAM, Windows 7 Ultimate SP-1, 64-bit OS, (2) GeForce GTX 580 (331.81), Space Pilot Pro (3.16.1)
Laptop: Intel Core i7 3.9GHz, 16.0 GB RAM, Windows 7 Pro SP-1, 64-bit OS, GeForce GTX 780 (331.81), SpaceNavigator (3.17.7)
View 3 Replies
View Related
Mar 27, 2012
When I create a configuration in one iPart, I have one Extrusion’s sketch link to another supressed Extrusion and cause problem.
Can I supress sketch in iPart ?
If I can suppress that sketch and I think the problem will be solved.
View 5 Replies
View Related
Jan 16, 2012
I am experiencing a crash when I try and place an ipart (any of them) into a new drawing. The open file box works but when the base view is placed in the drawing it has an unexpected problem and crashes.
Is this a documented problem , and a hotfix is forthcoming or is this just me and something local to my installation. Normally my install is very stable.
View 2 Replies
View Related
Dec 19, 2011
I have been trying to create an ipart. Once the ipart is created i am un-able to edit the sketches of features with issues.
I need to modify a sketch and to create an alternate sketch (suppress/unsuppress) but get an error message when i try to edit the sketch.
Windows 7 64 bit
Inventor 2012 Professional
Dell T1600 CPU E31245 @ 3.30GHz
8 GB RAM
View 2 Replies
View Related
