AutoCAD 2010 :: Length Of Single Entity Using List Command?
Feb 27, 2012When we launch the Area comand the area value is hold in the system variable "area".
What is the system variable that holds the Length value of the selected entity?
When we launch the Area comand the area value is hold in the system variable "area".
What is the system variable that holds the Length value of the selected entity?
When we launch the list command, the Area system variable holds the area value of the selected shape.
How to get the length value into an Autolisp program to use it?
How to automatically stick the coordinates obtained from the “list” command in a table?
I’m wondering if there is a way to automatically store the XYZ coordinates obtained from the “list” command in a table with three columns in the AutoCAD.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I'm borrowing from the samples library in the Inventor:
Public Sub GetSingleSelection()
' Get a feature selection from the user
Dim oObject As Object
Set oObject = ThisApplication.CommandManager.Pick(kPartFeatureFilter, "Pick a feature")
MsgBox "Picked: " & oObject.Name
End Sub
Works fine, and is fairly simple, but the problem I'm having is if I press the escape key after starting the command, but before making my selection, I'm not able to start the command again.
I realize from my searching that using the Selection (Simple) sample allows for an interrupt, with some modification, was just wondering if there was something similar for this simpler selection option.
I am having an issue with the sheet set manager's tool to insert sheet list table. I have a new sheet set for a new project that was created entirely in Autocad 2012. When I try to insert a new sheet list table, after I click OK in the Sheet list Table dialoge box, it simply closes to an empty command line with nothing inserted. Why nothing is inserted?
View 2 Replies View RelatedIs there a way to surface this geometry with a single surface entity?
I had to use 2 lofts to "surface it" instead of region due to lines being non-coplanar with the arc (in other words top most corner is higher than the other adjacent 3 corners).
A defined block "DH" has:
A circle on layer CIR having a color of red...
A defined attribute on layer ATTR having a color of white...
The insertion point is the center of the circle...
Is it possible to change the circle to blue on one instance of the block without affecting the same change to other identical blocks in the drawing? Example:
Attachment 35286
I need to save a drawing file and give it the name of my desire using a single command, I don't want to issue "saveas" and then specify the name in the file name prompt. This problem is has been faced when I was using ScriptPro and I couldn't succeeded to do that. Hence I need to know if it is feasible to do the stuff using a single command. It will be preferred if I can choose the location to save the file also rather than save the file to the default location.
View 2 Replies View Relatedpresuming I have a selection set of different entities, that might have different linewight.
The code that is responsible for this property is 370
370Lineweight enum value. Stored and moved around as a 16-bit integer.not omitted from here
I need to make all of the entities have the same layer, and to make sure the each entity has the "ByLayer" lineweight.
The problem that I encountered, is the lineweight changement.
This is the colution that I came with, but it doesn't work for me:
(defun c:test () (setq en (car (entsel))) (setq el (entget en)) (setq el1 '()) (setq indx -1) (repeat (length el) (setq indx (1+ indx)) (if (/= (nth indx el) (assoc 370 el)) (setq el1 (cons (nth indx el) el1)) ) ) (setq el el1) (entmod el) (princ) )
Having tested it in different ways, it looks like at the end, el1 represents the association list that I want my object to have, but it doesn't want to update.
I use extended data on 2d entity in AutoCAD 2010. In a lisp program, I have filtered with extended data selection. Filters work with entity like: line, polyline and Mline but with insert entity it don’t work.
The end get result for a block :
((-1 . <Nom d'entité: 7ffffbe7d90>) (0 . "INSERT") (330 . <Nom d'entité: 7ffffb039f0>) (5 . "18CA91") (100 . "AcDbEntity") (67 . 0) (410 . "Model") (8 . "Fam_POTEAU_ROND_INSERT_021") (100 . "AcDbBlockReference") (2 . "POTEAU_ROND") (10 155239.0 -100209.0 0.0) (41 . 16.05) (42 . 16.05) (43 . 16.05) (50 . 0.0) (70 . 0) (71 . 0) (44 . 0.0) (45 . 0.0) (210 0.0 0.0 1.0) (-3 ("CREEMET000" (1000 . "Fam021") (1040 . -14.0) (1040 . 434.0) (1071 . 0)) ("CREEMET001" (1071 . 2) (1071 . 3) (1071 . 0)) ("CREEMET014" (1000 . "Poteau rond mixte (a completer)")) ("CREEMET002" (1000 . "_0_0_0_0_0_0_0_0_0_0_0_0_0_0_0_0_0_0_0_0_-1_-1_-1"))))
The filter list use :
((-4 . "<OR") (2 . "POTEAU_ROND*") (-4 . "OR>") (-3 ("CREEMET002" (1000 . "_0_0_0_0_0_0_0_0_0_0_0_0_0_0_0_0_0_0_0_0_-1_-1_-1"))))
line command is a multiple command. there is a way to execute it like a single command?
View 4 Replies View RelatedI am looking for a function to print out the entire entity list of the selected entity...
so... walking down through the entity data... print out what it finds... any time it encounters an entity name... then do an entget and print that out too.
AutoCad 2011. I am having no luck when trying to drag a command from the Command List pane to the Quick Access Toolbar. I have success draging to Tool Palettes
View 1 Replies View RelatedI have been able to create an upright with slots and holes to the length of 29-1/4" and via two seperate cut extrusions cause the part to shorten using iParts. I was told that the Frame Generator uses the parameter of G_L to populate the new cut length for use with the parts list. I have been able to create a frame generated part and get the length to populate the parts list however I have not been able to get my upright cut length to show in my parts list.
I did create a new property in my parts list column chooser, my BOM is set to Phantom, my .ipt parameters has a user parameter of G_L/equation of Length which above is listed as 29.25 in. Every thing that I can think of is the same from my frame generated files to my upright files.
Right now my parts list will not even show quantities of any kind. How to get parts list to show the cut length?
I use flat piano hinges on doors for many of the machines we build. I would like to be able to calculate the total length of multiple doors on a single machine. We buy these hinges so it needs to go on a buy out parts list.
So here is my problem:
To make it a useable hinge I build an assembly from two hinge halves.
This allows me to check for interference within the machine when the door gets opened.
I set the BOM structure of the assembly to purchased so it shows up on my buy out list.
Both halves of the hinge are set to normal.
There are hinges of different lengths on the same machine.
I can link a parameter of one of the halves to the assembly to show length of the hinge but I cannot set the BOM base qty on the assembly to that parameter so Inventor can add up the lengths.
When I group the items in a buyout parts list the result is "0." The individual assemblies show the correct length because I use the "length" parameter that is linked for the QTY in the parts list. But I cant "add" the lengths and have a total whe I group them.
I need to have mixed units in this list. Some things are bought as Each and these hinges are bought in length.
I would like to add additional entities to the selection if any of the selected entities contains a an xdata value.
If I put the condition into the ImpliedSelectionChanged reactor I imagine will probably loop back on itself.
I use my parts list to generate a total length in inches of the same part that is used in several places in my assemblies. I then export it to excel, convert it to feet, etc. I've been doing this for some time now and it works great. The problem I am now having is I forgot how I got this magic to happen and I need to set another part to appear with it's total length in the list. From what I remember I set the QTY column in the parts list to show the length of the part and then I set the parts list to merge the same parts. For the life of me I can't remember how I did this. How this is done correctly?
All of the parts are created by the frame generator if this matters.
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
where I can obtain a freeware lisp routine that lists the lengths of all the polylines on a specific layer or within a selection set? I want to avoid list if possible as there are rather a lot of polylines!
View 2 Replies View RelatedI have a line that i would ideally like to divide into 3 equal segments. The divide command places points along the line, but I can't snap to them.
I know that I can place a block at each point which I could snap to, but is there a way of doing it without creating a block? Also is there a command that actually splits a line into 3 equal-length lines?
I've migrated from Autocad 2005 to ACAD LT 2014. After using it for a couple of weeks I find the angle and length display on the line command more of a distraction. Can I turn this feature off?
View 3 Replies View RelatedIn our “Parts list” (or BOM as we call it) on our .idw’s we have field for “LENGTH”. For example, we use round tubing. We would list the cut length of that piece of tube in the “LENGTH” column. As it stands now, we add “LENGTH” as a custom iproperty in the .ipt. Then in the drawing we add that property to the parts list to capture the length. This works fine, but I’m wondering if we can eliminate some steps by capturing the actual dimension from the sketch to automatically populate the “LENGTH” value. Needless to say, this would eliminate room for error (less typing) and will update the value automatically if length is changed or if the part is copied. I suppose the same would apply for “WIDTH” on sheet metal parts... How do I do this?
View 9 Replies View RelatedI am wondering when in the idw and have multiple parts some the same and some different. I would like to distinguish between each part as a different part or balloned so they all have a different ref number.
example: have part A and part B and part C
part A has three different instances in the iam
part B has two
part C has four
How do I represent them in parts list and ballooning as different single instances?
part A- ballooned like- 1, 2, 3
part B- ballooned 4,5
part C- ballooned 6,7,8,9
For example, I have a 10cmx10cm grid with lines every 1cm. I want to turn this square into a triangle by reducing the length of the top edge to a single point. The final image should show the vertical lines reaching up towards the top centre, while still leaving the horizontal lines 1cm apart.
Using DISTORT will push the vertical lines up towards the top, producing uneven spaces between the lines. How do I avoid this? know it would be easy to recreate the desired triangular grid from scratch, but this is just an example of my problem. I need to apply the solution to graphics which cannot be reproduced again - i.e. bitmaps.
how to draw a certain line and be able to delete part of it.
Example 1: I would like to draw a bunch of seried resistors, so I made a bunch of rectangles and draw a wire across them. But there are wire crossing through each one of them, how do I remove/erase that part in between each of the resistor? The line is made by using command: LINE
Example 2: Drawing some polygon and random shapes. Simplest example, drawing a half circle, so I draw a circle and want to remove the other half, how do I do it?
Yes, I know in example 1 I can do one object first then copy paste... But that is not what I am asking. I am seeking the command how to remove the lines or object in between.
Autocad2008 has the Break, Break at Point, and Dimension Break tools. There may be other variations of the break command, but I'm not able to fined a way to quickly use any of these commands to create a very simple single break point on a single segmented line at an unequal segment. I'm surprised Break at Point doesn't fit the billet.
Example:
I've drawn vertical line 10 units long. I would like to place a single break point at 7.956 units from either endpointe of that very same line. This is not a polyline. When selected it is depicted as a line with two equal segments.
The purpose of the break is so that I can intersect a horizontal line at 7.956 units located on the vertical line.
It seems to me that with all of the break tools available, one of them should be able to accomplish this simple task on the fly. Even most basic CAD programs such as Draft It, has a break tool that performs this function easily and quickly with one mouse click and one single text box entry.
Also, the fastest way I have found to accomplish this task is to simply draw another vertical line 7.956 units over the original vertical line, and that allows me to attach my horizontal line at 0 or 180 degrees from the vertical 7.956 units. I then go back and delete the second vertical line.
without reiterating a lot of what is said in this thread: [URL] ......
This happen outside the potential malware infection?
if you care to not click-through, the problem is that certain commands (not all of them) simply do not disply in the command line. so the MOVE command for example looks like this:
NORMAL:
Command: _move
Select objects:
NOW:
Command:
Select objects:
same with QSAVE and who knows how many others.
Is there a way to modify the DEFAULT SCALE LIST to show a metric scale list in an imperial template? I mean, I start a drawing using the imperial template, but i want to use the standard metric scales on paper space. on previous versions the scale list shown both imperial & metric. Now it depends of what the template is using.
View 1 Replies View Relatedwant to upated attributes in proxy entity is this possible?
View 1 Replies View RelatedIs there a comprehensive list of all the surfacing commands or possibly a full tutorial showing surfacing in inventor?
I would like to be able to compare the surfacing tools to other systems to make a purchasing decision, and not sure how to get a list or evaluate the surfacing functionality.
using the list command used to pop up the grapscr text box, now it does not, is there a setting for that?
View 2 Replies View RelatedHow to get the individual polyline length of the entire drawing as per the name of the line written against him in the excel sheet. That would prepare the Bar bending schedule quickly.
View 2 Replies View Related