How to automatically stick the coordinates obtained from the “list” command in a table?
I’m wondering if there is a way to automatically store the XYZ coordinates obtained from the “list” command in a table with three columns in the AutoCAD.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD 2008 & 2012 – Right-click on the box that says “Command:”, go to options. User changes the Font type but it does not stick after re-opening another blank autocad drawing. I tried Updated the font, Set as Current profile, exported the profile, attempted acad to open the profile automatically with the /p command in the Shortcut Target with the same results.
I can verify that the profile from the “/p” is being opened properly but the custom settings/font do not stick.
How can I automatically get point coordinates and show it in drawing. For example I have 100 points and I need to write x and y coordinates right next to the point. (not in table or somewhere else).I guess I need a plugin or smth?
View 3 Replies View RelatedI'm using autocad2010. The command( Paste with original coordinates ) is not working.
The application(autocad-2010) uninstall and then reinstalled the error is continued.
When we launch the Area comand the area value is hold in the system variable "area".
What is the system variable that holds the Length value of the selected entity?
I am having an issue with the sheet set manager's tool to insert sheet list table. I have a new sheet set for a new project that was created entirely in Autocad 2012. When I try to insert a new sheet list table, after I click OK in the Sheet list Table dialoge box, it simply closes to an empty command line with nothing inserted. Why nothing is inserted?
View 2 Replies View RelatedI have to make an animation for a game, and I have to put a large number of images exactly next to each other in a line. This takes a lot of time to do by hand. Is there a way (or software) to do this automatically?
View 2 Replies View RelatedThis is happening on all my Autodesk software (AutoCAD, Map 3D, and Civil 3D)(2012 and 2013). . .
I initiate a command (say LINE), I pick my first point to draw the line and nothing happens. I must click it again to get it ot work. It only happens when I'm working fast. For instance:
L (for line)right-click (for ENTER)immdediately try to click the first point of the linenothing happens and I must re-pick the firtst point again
or
E (for erase)right-click (for ENTER)immediately try to pick a corner for your boxnothing happens and I must re-create my selection box However, if I go slow it works fine. For instance, after initating the command simply wait about 2 or 3 seconds and then try to click. It all works fine there, but waiting becomes annoying now.
The mouse clicks work fine in all my other software (Excel, MS Word, etc.). I am having another (maybe totally unrealated issue) with my keyboard. While typing, my cursor will magically move somewhere else on the screen. I'm using a laptop and have made sure I'm not touching the touch pad. This may be a completely unrelated issue to the mouse clicks, but I thought I'd inform you just in case the two go hand in had. by the way. . .dynamic mode is disabled, PICKFIRST is set correctly, and I've messed with the 3D Config options.
AutoCad 2011. I am having no luck when trying to drag a command from the Command List pane to the Quick Access Toolbar. I have success draging to Tool Palettes
View 1 Replies View RelatedWhen you extract information from attribute blocks to form a spreadsheet can you specify that the spreadsheet also lists the co-ordinates x,y, z for that block? For example, you have an attribute block with information regarding, station number, chine number. When I extract the information I would like to list the x, y co-ordinate point of the circle block .
View 2 Replies View RelatedI want to insert or import an image that automatically recognizes my drawing coordinates.If I need to, I can use AUD (as Map 3D).However, my computer has difficulty processing too much data.
View 7 Replies View RelatedI have been using the "LIST" command to get coordinates of a point. The list can be as long as my monitor is high. I need to copy the coordinates of about 3 000 points to a Microsoft Word file to manipulate with them.
The "LIST" command would show me about 4 points after which i have to press "ENTER" to get the next ones, but this is obviously pointless. How could i get the coordinates of very many points to a text file all at once?
i need to make a list of all the coordinates (X,Y) or (X,y,Z) of all the points in my project
the shape of my project look like an Eclipse
i made it out of 236 points ... i want to to put all those points in a table of ( X,y,Z ) ... i think there is some kinda output that can do that for me
iam uploading a vedio on youtube to show u what iam talking about
[URL]....
just a list of X,y,z of every point how i can do that ?
Is there any way to go round an autocad site plan using the ID command and have the coordinates registered automatically to a table in Autocad 2004
View 5 Replies View RelatedIs it possible to obtain a list of coordinates for view ports (with dxf codes or otherwise) similar to obtaining a list of (assoc 10) for polylines?
I'm aware I can get the center, width and height from the dxf codes, but what about for clipped view ports with irregular shapes?
I'm trying to create about 150 cross-sections, each consisting of 9 closed polylines of which I have created the coordinates. My issue is making the list of coordinates create separate polylines instead of one enormous polyline. Any way to setup the columns, perhaps with blank rows, some way of applying ASCII code, etc. to automatically break up these polylines? (even if they aren't closed that's fine, I just need to make the polylines separate.)
View 1 Replies View RelatedI created a vb add-in that creates standard sheet setups using a .pc3 file called BATC PDF.pc3 . (This .pc3 file was created using the DWG To PDF.pc3 plot config - Margins were set to 0)
The add-in accomplisheds the following :
Queries a database for all of the blocks and associated attributes that our company has used over the past 20 years for Drawing FormatsDetermines if any of the blocks (formats) exists in the drawing.Determines if any of the plocks overlap and warn userDetermines the appropriate sheet numbers for plottingCreates a standardized (by name) plotCreates a Drawing Sheet Description file (DSD file) that contains all of the sheets in the appropriate order (all sheet desctiptions usually exist in the same drawing file and the same drawing layout.Leverages the Publish Engine (Autodesk.AutoCAD.Publishing.Publisher PublishExecute method to publish contents leveraging informaiton in the DSD
I am testing the application functionality with a wide variety of our AutoCAD drawing library. I have ran into some anomalies with some of our drawings that have a large number of sheets:
Exceptions obtained Random) - via .dll (Random FATAL ERROR: Unhandled Access Violation Reading Oxffff Exception at ........No exception - using CommandLine "Publish" using DSD created by routingNo exception - via Visual Studio debugging (speed via debug infrastructure is 1/10th publish speed)
Routine works well with drawings that have smaller sheet counts(10 or so) sheets.
I am configuring the Visual Studio solution so that it can be executed without the supporting database
I am using the ALIGN command to overlay two groups of blocks, I'm then using some VBA code to export the coordinates of the blocks to an excel sheet to make comparisons.
The issue I'm having is when I use the ALIGN command the coordinates exported are different to those in the drawing (but only for those moved using the ALIGN command).
I don't get this issue when I use the move, rotate and mirror commands, only ALIGN. What may be causing this?
I'm relatively new to 3ds max and for a project I need to be able to get a list of all objects along with their respective coordinates. I've found ways to get the object list, but none of them display the coordinates?
View 2 Replies View RelatedI am testing using script files to automate inserting blocks for As-Built drawings. My script files run fine, but AutoCAD is placing the blocks at a location that is different than what the input on the command line shows. For instance, I am placing a block at (6,6), which is reflected in the command line, but the block is actually placed at (6,5.898). The 5.898 does not appear anywhere in my script file, and the command line even shows that (6,6) was entered for the insertion point.
View 4 Replies View RelatedIs it possible to add the pound symbol to the parts list automatically.
View 3 Replies View RelatedI have a Part List in the assembly drawing.
This list has Renumber Items activated.
All renumbered items become in blue cells in Part List properties table.
All added or altered after that Part Properties are not shown in this Part List.
For instance if I would add or change some Description, Comments or other properties to some parts which are in “blue” cells those will be not updated in neither auto nor any manual way.
So far I should delete and create the table again to see new added properties.
The question is: Is there are any other more simple ways to update the Part List table without recreating it from scratch?
Is there a command that would break lines at intersections automatically?
I know there is such a command in autocad map 3D, but is there a way to do it in LT? With a macro?
I have attached a picture of the parcels that I like to break at each intersection has an example.
Then I go on to use the OVERKILL command which works very well.
without reiterating a lot of what is said in this thread: [URL] ......
This happen outside the potential malware infection?
if you care to not click-through, the problem is that certain commands (not all of them) simply do not disply in the command line. so the MOVE command for example looks like this:
NORMAL:
Command: _move
Select objects:
NOW:
Command:
Select objects:
same with QSAVE and who knows how many others.
Is there a way to modify the DEFAULT SCALE LIST to show a metric scale list in an imperial template? I mean, I start a drawing using the imperial template, but i want to use the standard metric scales on paper space. on previous versions the scale list shown both imperial & metric. Now it depends of what the template is using.
View 1 Replies View RelatedWe have our options set to Auto Publish on Save (Autocad 2011). On some of our stations, the PDF will pop up automatically. This is what we WANT to happen. On other stations, the pdf has to be found and then opened to make sure it is correct. (this step, which is apparently way to difficult for some people, is not being performed, leading to extra work/time later to complete the project) I had everyone ensure their DWGtoPDF.pc3 custom properties was set to "open in PDF viewer when done" (and when they do a straight plot, it does come right up) It just wont do it when its thru Auto Publish. Mine is one of them that comes up just fine....I have looked at every setting I have and tried to compare with theirs, but it all looks the same.
View 2 Replies View RelatedHow do I import a list of x,y coordinates to produce a complex curve in CorelDraw x4?
View 1 Replies View RelatedFirst time importing into 2012-have csv file that I imported. Coordinates land in right spot. Local system-No transformations/State Plane zones attached. When I look at them with tracking everything is okay. When I export the points they are the same I imported.
When I list the points they are way off?
if it's possible to import a list of coordinates into a drawing so that it places points in the drawing at the specified locations?
View 2 Replies View Related I have a few GPS coordinates in the form as:
N37*29.059
W82*39.793
Can I convert this to a point and start drawing lines with these points?
Apart from FLATTEN, is there a way to change the Z coordinates of an MLEADER to stop the text from appearing bold.
FLATTEN explodes the MLEADER & is thus not suitable for this.