AutoCad :: Delete Section Of A Drawing From Single COMMAND?
May 19, 2012
how to draw a certain line and be able to delete part of it.
Example 1: I would like to draw a bunch of seried resistors, so I made a bunch of rectangles and draw a wire across them. But there are wire crossing through each one of them, how do I remove/erase that part in between each of the resistor? The line is made by using command: LINE
Example 2: Drawing some polygon and random shapes. Simplest example, drawing a half circle, so I draw a circle and want to remove the other half, how do I do it?
Yes, I know in example 1 I can do one object first then copy paste... But that is not what I am asking. I am seeking the command how to remove the lines or object in between.
View 3 Replies
ADVERTISEMENT
Oct 24, 2011
I need to save a drawing file and give it the name of my desire using a single command, I don't want to issue "saveas" and then specify the name in the file name prompt. This problem is has been faced when I was using ScriptPro and I couldn't succeeded to do that. Hence I need to know if it is feasible to do the stuff using a single command. It will be preferred if I can choose the location to save the file also rather than save the file to the default location.
View 2 Replies
View Related
Oct 27, 2013
line command is a multiple command. there is a way to execute it like a single command?
View 4 Replies
View Related
Feb 6, 2013
I have a single corridor "section" that extends from the 'tip' of my cul-de-sac back to the start of the alignment.I scoured the group before posting and didn't see anything quite the same.Would it have something to do with the corridor line being parallel to the alignment?
View 2 Replies
View Related
Jun 18, 2012
I'm in the process of creating an exploded view of an assembly. I'm having to do this in a presentation file, and I was wondering if it was possible to section one of the parts in the exploded view. To be more specific, I have the majority of my parts spread out around another assembly in the center of the page. I want to get a three quarter section view of the center assembly so the internals are visible. Is this possble from within a presentation file and if so, how can it be done?
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
View 2 Replies
View Related
Sep 12, 2011
Autocad2008 has the Break, Break at Point, and Dimension Break tools. There may be other variations of the break command, but I'm not able to fined a way to quickly use any of these commands to create a very simple single break point on a single segmented line at an unequal segment. I'm surprised Break at Point doesn't fit the billet.
Example:
I've drawn vertical line 10 units long. I would like to place a single break point at 7.956 units from either endpointe of that very same line. This is not a polyline. When selected it is depicted as a line with two equal segments.
The purpose of the break is so that I can intersect a horizontal line at 7.956 units located on the vertical line.
It seems to me that with all of the break tools available, one of them should be able to accomplish this simple task on the fly. Even most basic CAD programs such as Draft It, has a break tool that performs this function easily and quickly with one mouse click and one single text box entry.
Also, the fastest way I have found to accomplish this task is to simply draw another vertical line 7.956 units over the original vertical line, and that allows me to attach my horizontal line at 0 or 180 degrees from the vertical 7.956 units. I then go back and delete the second vertical line.
View 9 Replies
View Related
Feb 27, 2012
When we launch the Area comand the area value is hold in the system variable "area".
What is the system variable that holds the Length value of the selected entity?
View 6 Replies
View Related
Jul 9, 2012
Currently using Autocad 2011. What are the advantages of using Sectionplane over the earlier Section command?Alternatively,point me towards a SIMPLE(!) tutorial or book that will explain how to use Sectionplane.
View 9 Replies
View Related
Jan 31, 2012
At my job, we are 15 drawers using acad 2008 and 2006. For some reson, on 1 computer, when the guy explode a block, acad delete that block insted exploding it. It make the just for some block, not all block. It make this with acad 2006 and acad 2008 but just with that computer.
View 4 Replies
View Related
Jun 17, 2013
I have captured a video with my little sony photo & video camera and some how there is a scene in the video TWICE I have tried everything to remove one section read instructions but they do not work, or I am not doing the right thing.I have tried to trim the clip using the in and out markers and it says to delete the unwanted portion . there is no action or place that I find to do this ( tried many hours )
View 3 Replies
View Related
Jul 12, 2013
I've attached 2 images showing of the section of the geometry I want to delete, second image is as a editable poly displayed as a wireframe.Is there a simple way of idenfying the section boundary and deleting all the enclosing polygons?
View 1 Replies
View Related
Mar 30, 2013
I'm trying to delete a unused layer. But when I do that I get the following error (see attachment). I googled a bit and figured out that the LAYDEL command might solve my issue, but as I'm using Autocad 2013, that's not possible, as it doesn't have this command...
The block that causes the error can also be deleted, I tried with the purge command, but must be doing something wrong cause it didn't work. Oh yeah, with regard to the purge command, I see it this way (attachment 2), how can you display it in a window kind of view to get a better overview?
View 3 Replies
View Related
Jan 17, 2012
Where is the command delete duplicate objects in AC2012? In version 2011 it was in express tools. Whether this command is not in version 2012?
View 2 Replies
View Related
Nov 11, 2012
I'm working on a project that details with topo lines. I have the contours, however because I imported them as DWG's from sketchup they're a bit messy. Basically, instead of being one continuous line, their endpoints intersect and overlap, making it look very messy. Is there anyway I could delete these extra lines? I tried the overkill command to no avail.
View 3 Replies
View Related
Sep 26, 2011
How to delete the selected area.like in this photo. i want to delete the section on circle.when i press delete it ask me to delete the layer not the circle.now how i can do this?
View 6 Replies
View Related
Jan 6, 2013
I've got a very long rectangular image. The top is important and the bottom is important, I want to cut out the stuff in the middle.How can I use the marquee tool to get rid of a large area that I have selected?I have done a fair amount of searching on Google and the forum but I still cannot figure it out.
View 9 Replies
View Related
Mar 4, 2011
I installed Xrite ColorChecker Passport software and loaded a couple of custom profiles in the develop module under camera calibration. There was a glitch in the software and it did not allow me to name those profiles. Once I uninstalled that version and loaded the newer version the naming process works fine. I would like to be able to delete the unname profile out of Lightroom but I am not seeing how that can be done.
View 13 Replies
View Related
Aug 30, 2001
I have recently started to try to learn map. can I import a single layer from another drawing?
View 9 Replies
View Related
Sep 16, 2011
I design press tools. Is there any ways in inventor 2012, where I can have only one common sketch in zero height and extrude profiles in different heights. Like plate no 1 @100 to 120mm (in vertical axis. A 20mm thick plate placed at 100mm above zero plane.) and plate no 2 in 150 to 175mm height and so on.
View 6 Replies
View Related
Jan 3, 2013
I'm fairly new to the AutoCAD API for .NET, and for the last month or so I've been googling about, looking for comprehensive documentation on the Autodesk API (their equivalent of man pages). I've yet to find anything that describes each method and class in the API.
My goal is this: I'm trying to figure out how to copy the contents of all drawings in the same directory into a single dwg file. What subsets of the AutoCAD API should I use to do so?
View 5 Replies
View Related
Oct 26, 2011
Does AutoCAD Architecture 2012 have a single drawing mode?
View 2 Replies
View Related
Jul 28, 2012
Sometimes in CS6 the delete command just acts as a non-optional "clear" command, and does not show a menu providing the content aware option. Sometimes this cures itself by closing and reopening the program. Sometimes not.
How do I get rid of this defect in the program?
View 1 Replies
View Related
Jun 13, 2012
Where is the setting to enable Single Drawing Compatibility Mode in 2013? It used to be under the system tab in the options and is not there in 2013. Is this option still available?
I want to open multiple drawings in the same AutoCAD window by double clicking a dwg file like I have always done. Is this still possible in 2013?
View 3 Replies
View Related
Feb 4, 2011
How do I create Multiple Levels in a single Drawing File
View 4 Replies
View Related
May 1, 2012
i can delete the drawing but not the name??
View 5 Replies
View Related
Jan 3, 2013
I'm using AutoCAD 2013 that came with Building Design Suite (Revit) and the copy command terminates after making the first copy, instead of continuing to make multiple copies until I terminate the command. Is there a switch to control this? A sysvar?
View 2 Replies
View Related
Nov 30, 2012
No Clean button or command in document palette settings.. Of course there are reset command but not to positive results.. I want to delete the colors in document palette but no clean or delete colors command... Also color styles is not useful and very sophisticated.
View 6 Replies
View Related
Jun 19, 2012
I facing problem with broken out section command problem.Whenever i select the command and select view inventor tip occured ( # fef attachment).
When i select ok everything command get canceled.I created sketch on view and then select command then also same problem occurred.
Is there any setting for this command. or i am going wrong while using this command.
View 3 Replies
View Related
Oct 24, 2011
I have a drawing where I am cutting a section on one sheet and them moving it to another sheet. Is there a way to get the section mark/callout to state on which sheet the section resides?
For example instead of the section just stating "A" it would say "A/3" or "A/Sheet 3" or something like that?
Inventor Professional 2013 (SP-2.3), Product Design Suite Ultimate
Desktop: Intel Core i7 3.4GHz, 16.0 GB RAM, Windows 7 Ultimate SP-1, 64-bit OS, (2) GeForce GTX 580 (331.81), Space Pilot Pro (3.16.1)
Laptop: Intel Core i7 3.9GHz, 16.0 GB RAM, Windows 7 Pro SP-1, 64-bit OS, GeForce GTX 780 (331.81), SpaceNavigator (3.17.7)
View 3 Replies
View Related
Jan 29, 2012
Can the Plot command be used to combine multiple drawing views into a single DWF file?
View 1 Replies
View Related
Feb 1, 2012
I have a part file that contain 7 separate solid. But in the drawing i want to show only 4 solids.
For this reason i put invisible command to other 3 solids in the part file . but in the drawing, i still see all the seven parts.
View 1 Replies
View Related
