AutoCad :: Delete Drawing But Not The Name?
May 1, 2012i can delete the drawing but not the name??
View 5 Replies
ADVERTISEMENT
AutoCad :: Delete All Hatches Within A Drawing?
Oct 7, 2009Quite often I recieve drawings with loads of hatches/solid fills in. For example a housing layout with all of the houses, trees, roads, grass etc hatched.
I generally want to delete these/turn them off and work with a line drawing.
Sometimes the hatches have been drawn on their own layer, so turning them off is simple. But sometimes they've been drawn on layers with other things I want to keep. Genereally there are loads of hatches, so deleting them one by one is frustratingly slow.
I used to use Microstation, and in that there was a tool to delete hatches or fills, and if you selected all items you could delete the lot in one go. Is there such a tool in AutoCAD?
AutoCAD Inventor :: Cannot Delete Hatch In A Drawing
Oct 30, 2013I made a sketch attached to a drawing view, in it made a hatch. I closed the sketch and the file.
Opened again, after days, activated the sketch, selected the hatch, it turned red, pressed delete but it didn't disappear. Also on the right click there is no delete option.
When i select the hatch and it turns red, when i press delete or right click it turns green.
It is strange that when the sketch is closed and i select it in the browser i see the other lines of the sketch in red, but not the hatch.
AutoCAD Civil 3D :: Delete A Breakline And Keep It In The Drawing?
Dec 12, 2011I have a feature line in my drawing. It is one of over 1000 breaklines in a surface. I want to delete it from the surface but keep it in the drawing. How do I do this?
In 2009 this was easy. I could erase the featue line then use the OOPS command to get it back in the drawing. Unlike the UNDO command, OOPS did not put it back in the surface definition. This was a wonderful feature/bug. In 2012 OOPS behaves the same as UNDO.
I found this post regarding finding a breakline in the surface definition but that is not realistic with 1000 breaklines.
Here are a few options I have tried:
Delete all breaklines from the surface and add the ones I want. (This is my best option so far.)Copy the featureline to the clipboard, erase it, then paste it back in. (Copying feature lines to the clipboard, or wblock, is very slow. The feature line should be moved back to the orignal site.)Explode the feature line into a 3D polyline and then convert back into a feature line. (Good option but does not work well for curves.)
Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600
AutoCAD Civil 3D :: Delete Parcels From The Drawing
Jan 10, 2013I'm trying to clean up the drawing. I have erased everything, but there are still 20572 parcels somewhere in the drawing that I couldn't delete.
The file is too big to attach so use the link to download:
[URL].........
AutoCAD .NET :: How To Delete Overlap Entity In Drawing
Dec 2, 2012How to delete overlap entities in drawing?
Here i attached the dwg file.
AutoCAD 2010 :: How To Delete Shape File Which Comes From Other Drawing
Mar 22, 2012how to delete shape file which comes from other drawing
View 1 Replies View RelatedAutoCad :: Delete Section Of A Drawing From Single COMMAND?
May 19, 2012how to draw a certain line and be able to delete part of it.
Example 1: I would like to draw a bunch of seried resistors, so I made a bunch of rectangles and draw a wire across them. But there are wire crossing through each one of them, how do I remove/erase that part in between each of the resistor? The line is made by using command: LINE
Example 2: Drawing some polygon and random shapes. Simplest example, drawing a half circle, so I draw a circle and want to remove the other half, how do I do it?
Yes, I know in example 1 I can do one object first then copy paste... But that is not what I am asking. I am seeking the command how to remove the lines or object in between.
AutoCAD Visual LISP / AutoLISP :: Delete All OLE Objects From Drawing
Nov 26, 2012how to delete all OLE objects from drawing by most efficient way.
There are abt 150 drawings, each has from 2 to 20 or so OLE objects which need to be deleted. OLE objects are on many paper spaces.
I tried to use qselect but it selects only what is in current space.
Would need some lisp or some other methode than all can be deleted (excluding those which resides in blocks).
Tried also yto use ssx and then erase but still it deletes only what is on current space.
Just as additional info, those OLE are all pictures, not xls files for example.
AutoCAD 2010 :: Can't Delete Or Find Rogue Layer In Drawing?
Aug 28, 2012i have gotten a drawing from another user and have managed to purge all of thier layers except for one. I have deleted everything out of the drawing, done "select all" numerous times and deleted, but this layer still won't let itself be deleted. I have made sure it is not the current layer, w blocked the whole drawing etc. There was an ole image in this drawing at some stage, could that have left this horrible layer "25L"???
I hate when i have rogue layers in my files
AutoCad :: Select Or Delete Unwanted Switches In Layout Drawing?
Jan 22, 2014How to select or delete the unwanted switches in my layout drawing ? I can select it ... may i know what layer is that and it doesn't appear in my model drawing...
View 6 Replies View RelatedAutoCAD Inventor :: Delete Hatch / Copy Drawing From One Sheet To Other
Nov 13, 2013Using ISO.idw template I created into a sheet a Sketch which contains a hatch. Now I want to delete that hatch and I don't find anywhere how to delete it.
The second problem is this: I want to create in multiple sheets the same drawing but with small differences. How to copy a drawing from a sheet to another sheet. I press right click on the first sheet and i press Copy but there's no Paste button.
AutoCAD VB :: Delete Blocks With Specific Names In Multi Layout Drawing
Apr 25, 2011In autocad 2011 ... I am looking for some sample code to delete all blocks with specific names in a multi layout drawing. There may be multiple blocks with the same name.
This is what I have so far ... this code collects the objects and loops through the layouts and the blocks ... if it finds the text "REVBLK" in the block name ... I want it to delete the block ... it does delete some of them but not all of the blocks ...
Dim E1 As Object
Dim ATS As Variant
Dim EA As AcadAttributeReference
Dim objLayouts As AcadLayouts
Dim LayerNextNo As Integer
Set objLayouts = ThisDrawing.Layouts
LayerNextNo = ThisDrawing.ActiveLayout.TabOrder
[code]....
AutoCAD 2010 :: Delete / Remove Bar / Ribbon With All Of Functions Related To Actual Drawing
Nov 24, 2009I'm relatively new to the software and have somehow managed to delete/remove the bar/ribbon with all of the functions related to the actual drawing of..well a drawing.
View 6 Replies View RelatedXara :: Delete Part Of Line When Drawing?
Jun 15, 2011I just started using Xara and have been doing some sketches in Xara Photo & Graphics 7.0 Once I am done my sketch I often want to delete a line (inner line I used to draw but now needs to be deleted to make sketch look right). Is there a way to erase part of a line. If I try to highlight and delete the line I lose the whole thing. I just want to delete part of a line (in the center of the line not at the end of it). So far I have been importing into photoshop and erasing my lines with the eraser tool but it takes so much time!
View 6 Replies View RelatedIllustrator :: Remove Or Delete Blur From A Drawing?
Oct 25, 2013I need to delete or remove a gaussien blur from a drawing. How?
View 2 Replies View RelatedAutoCad 3D :: Won't Delete Layers In Drawing In Layers Properties Manager
Sep 20, 2006There are some layers in my drawing that won't delete in the layers properties manager. I don't know why. It gives me 4 possible reasons:
- It might be layer 0 or a Defpoint (whatever that is).
- It is the current layer
- It is an Xref dependent layer
- It is a layer containing objects
But none of these, to my knowledge, apply. There could be things on the layer that I'm just not seeing, but I've looked thoroughly. I even zoomed out to the extents, highlighted the whole area, and clicked the erase tool, but it still won't go away. I got the file from another computer, so it might be an Xref dependent layer and the Xref'ed files just didn't come with it. How would I be able to tell - and how could I remove the Xref dependency?
Other than that, is there any other reason a layer won't delete? Can I force it to delete?
Photoshop Elements :: 12 - Delete Many Chosen Photos With One Hit On Delete?
Jan 24, 2014Let's say I have downloaded 500 shots to PSE 12. I would like to go through them quickly and eliminate the ones I definitely do not want.How can I quickly tag them or whatever and then with one touch on the delete button delete them all at once?
View 3 Replies View RelatedLightroom :: Delete File From LR Using Delete From Disk Option?
Jun 22, 2012When i try to delete a file from LR using the delete from disk option the file does not so up in my trash. I have deleted 200 bad files and the never showed up in the trash. I have been trying to clear up some disk space but the available disk still shows the same so I know they haven't been deleted. Am using Lion on a MacBook Pro 15 and am fully updated. Am I doing something wrong?
View 2 Replies View RelatedLightroom :: 4.3 - How To Delete Pictures Using Contextual Menu Or Delete Key
Feb 9, 2013I have LR 4.3, Camera Raw 7.3
Until yesterday I was able to delete pictures, using the contextual menu or the delete key. I got the message asking me if I wanted to delete them from disk or from the catalog.
But now, that popup message doesn't appear. The picture is not removed, just nothing happens.
I checked the logs and this is the error message:
performCommandDesc could not perform command ag.library.expandAllStacks (Command was disabled.).
I uninstalled LR moving it to the trash. Then I deleted the com.adobe.Lightroom4.plist and I also removed the folder ~/Library/Application Support/Adobe/Lightroom.
I rebbooted the machine and installed it again. But the issue is still there, with the same error message.
I verified the disk and checked file permissions.
I also tried to use another catalog from a backup.
Nothing, same error.
One anusual thing that I did before the error was to install the "HDRsoft Merge to 32-bit HDR Plug-in for Lightroom - Version 1.0"
I removed it but the error was still there. After the re-install I didnd't install that plug-in again so if it was the problem, it shouldn't be after the clean installation that I did again.
Machine Specs:
Man mini server mid 2011
2GHz Intel core i7
Ram: 8G
Graphics: Intel HD Graphics 3000 512MB
OSX: 10.8.2 (12C60)
Photoshop :: Can't Delete Selected Layer Using Delete Key CS6
Aug 15, 2013Why can you no longer delete layers with the delete key?
View 4 Replies View RelatedIllustrator :: Can't Delete Anchor Points With Delete Anchor Point Tool
Aug 30, 2012I have a shape in illustrator CS6 that I'm trying to edit. When I try to click on a point with the Delete Anchor Point Tool nothing happens however I am able to select the point using the Direct Selection Tool and then remove it using the "Remove selected anchor points" option in the Control palette. Same issue with trying to use the Convert Anchor Point Tool.
View 7 Replies View RelatedAutoCAD 2010 :: No Longer Copy / Past One Item From One Drawing To Separate Drawing
Dec 10, 2013Eventually after I copy and paste with the clipboard enough times within one drawing, the ability goes away and I can no longer copy and past one item from one drawing to a separate drawing. I need to use the clipboard function because that is the only way of getting an item from one drawing to another.
I have download a clear clipboard function but it doesn't work. Closing CAD and restarting does not reinstate the function.
AutoCAD Inventor :: Showing Parameters Of Drawing Template On Actual Drawing
Jul 26, 2013I have created an iLogic panel which allows me to control my revision a lot easier and puts my entered data into the parameters of the sheet itself, is there a way to have this show up on the drawing itself for a template?
View 1 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Saveas Drawing With Default Drawing Name
Oct 13, 2013I am trying to put together a lisp routine for exporting a Civil3D drawing to basic autocad entities and convert it to a clients layer standards.
I don't want any user input, so I see two problems with the routine at the moment.
Step 2. SAVEAS - I want the drawing to be saved in the same directory as the current drawing, either called "CLIENT_export.dwg" or preferably "Export_{current drawing name}.dwg". If the dwg exists I want it either to overwrite or increment a suffix number.
Step 4. At the moment it askes the user for a selection, I want it to select "ALL"
;;;Purpose to convert a Civil3D drawing into CLIENT layer standards.
(defun c:client ()
(setq old-echo (getvar "CMDECHO"))
(setvar "cmdecho" 1)
[Code]...
I don't have any experience with LISP or any other programming. I have just been cobbling this together from bits and pieces I have found on the web.
AutoCAD 2010 :: Double Click Opens Drawing Plus Blank Drawing
Sep 11, 2012My Autocad has started a new behavior. When (in Win7) I double-click on a drawing file in Windows Explorer, Autocad opens the drawing file and also starts a new drawing, all in the same session of Autocad. Is there some system variable or Windows variable that controls this?
View 1 Replies View RelatedAutoCAD LT :: Exiting Drawing By Clicking On Small X In Upper Right Corner Of Drawing
Oct 31, 2011When exiting a drawing by clicking on the small X in the upper right corner of the drawing, my program routinely "stops working". I get the error message that it has stopped working and it closes. No chance to save work in other drawings open at the time. I often have three or four drawings open so my only workaround is to go through each and save, then close the one I want to close, let the system crash and reopen the other drawings. It does not crash every time but several times a day.
View 6 Replies View RelatedAutoCad :: Architectural Drawing - Levels Show In Model View But Not In Drawing?
Sep 14, 2011The layer is on and the ground levels on the architectural drawing in model view show the number and the box surrounding them however in the drawing window be it in the numbers have dissapeared and we are left with only the boxes ?
View 3 Replies View RelatedAutoCAD Inventor :: IPart Drawing Template - One Drawing File Versus Individual Drawings
Jun 21, 2013Setting up a tabulated ipart drawing template. Which is better...one drawing file with a table or individual drawings for each tabulation? Also does one method work better than the other when introducing vault?
View 1 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Insert Another Drawing Layout Tabs Contents In Current Drawing
Mar 7, 2013I want to insert another drawing layout tabs contents in current drawing.
It's easy for MODEL tab, but for LAYOUT tabs, I dont know how!?
I prepared a code for INSERTING MODEL tab in current drawing:
(defun INS_DWG (TAB path dwg P / blk)(setq blk (strcat ""*" path dwg """));(setq N (vla-get-count (vla-get-layouts)));;Number of LAYOUT TABS in dwg(if (or(= TAB 0) (= TAB nil))(command "INSERT" blk P 1 0)); TAB=0 or omitted ==>Insert MODEL;(if (= TAB 1));==>Insert the 1st LAYOUT in dwg file;(if (= TAB 2));==>Insert the 2nd LAYOUT in dwg file;and so on....);;;usage:;;(INS_DWG 0 "c:\test\" "test.dwg" '(0 0))
AutoCAD Inventor :: Copy Drawing Views To New Drawing Template
Sep 20, 2013I've recently made a new drawing template with ilogic prompts for entering data for all fields within the template. It also sets view sizes etc. I have lots of master drawings, which are reused when sizes etc change for a contract, which i would like to transfer to this new template. Drawing Resource Transfer Wizard does not offer this function.
I could get all drawings in a folder copied to specific sheet size on the master template.As the template will probably be developed further in the future I'm very loathed to do this take manually.