AutoCad 3D :: Won't Delete Layers In Drawing In Layers Properties Manager
Sep 20, 2006
There are some layers in my drawing that won't delete in the layers properties manager. I don't know why. It gives me 4 possible reasons:
- It might be layer 0 or a Defpoint (whatever that is).
- It is the current layer
- It is an Xref dependent layer
- It is a layer containing objects
But none of these, to my knowledge, apply. There could be things on the layer that I'm just not seeing, but I've looked thoroughly. I even zoomed out to the extents, highlighted the whole area, and clicked the erase tool, but it still won't go away. I got the file from another computer, so it might be an Xref dependent layer and the Xref'ed files just didn't come with it. How would I be able to tell - and how could I remove the Xref dependency?
Other than that, is there any other reason a layer won't delete? Can I force it to delete?
View 5 Replies
ADVERTISEMENT
Sep 27, 2012
I am using AutoCAD LT 2013 where I work.I am working with a Floor Plan in which the building and the Site Plan are XRefed and the drawing is very slow.
The building is small, but the XREfed Site Plan, being of a large shopping center, was as drawn by a survey company, and is large. I took out (erased) the solid hatches that indicate the concrete, to make the site a little smaller. Since I do not use the entire site plan on the recipient Floor Plan Sheet, I clipped it using XClip, so only the necessary areas and parking around the building are shown.
I notice that the recipient drawings are very slow (i.e., the Floor Plan where I am working), and the Layers Properties Manager is the worst offender, being very slow and erratic when I want to add a new layer, change layer name, etc.
The computer is a new very large computer, and I did not have this slowness problem before working with other prjects.
Is there any setting or some settings that will make the drawings faster?
View 5 Replies
View Related
Oct 21, 2011
" unreconciled new layers new layers were found that may need to be reconciled. view unreconciled new layers in layer properties manager
View 9 Replies
View Related
May 24, 2013
Working in AutoCAD 2013LT-my Layer Properties Manager has stopped allowing me access. When I open a drawing layers all come however I get a pop-up note that says: "ALL LAYERS ARE ALREADY INCLUDED IN THIS LAYER STATE. NO LAYERS CAN BE ADDED"
What happened-even when I try to edit layers they will not show up in the Properties Manager as changed.
View 0 Replies
View Related
Jan 19, 2012
I want to attach a drawing as xref to another drawing, but with maps, to be specific, with drawing manager layers, entity styles and hatch styles. I've made different maps in the same drawing with different styles, so I can change them accordingly.
I'm running AutoCAD Civil3D 2011.
View 1 Replies
View Related
Aug 12, 2013
I remember that there used to be a command I used in an older version of AutoCad, such as "Sort Layer" or similar that would populate all of the layers used in a drawing, which solves the problem of not being able to see all the layers. I believe the default value is not set at a high enough number. What this command is?
View 1 Replies
View Related
Feb 29, 2012
I'm working on a drawing where I've been turning on/off a layer for parcels so I can select a well (point coverage/theme) or the parcel to get well owner and property information. All of a sudden I can't select the layer anymore - the checkbox becomes unresponsive. C3D and not map for this...
C3D 2011
Intel Xeon E5630@2.53Ghz
NVIDA Quadro NVS420 Dual Monitor
12GB Ram / Win7 Professional 64bit SP1
View 3 Replies
View Related
Nov 21, 2012
I am using Layer States Manager in CAD2010 and have run into this problem.
I inserted an XREF into my drawing which is using LMAN. I put the XREF on a layer that is visible for the current layer state I am in. Saved the drawing then another coworker opened it and the xref was no longer visible. Even though the layer settings show as not frozen or locked the XREF won't show. If I move it onto a layer that is showing in the layer state manager it still doesn't show. I'm not sure if this is just a glitch or if I have some some setting set incorrectly.
Also are others have problems with LMAN not working after drawings are opened by someone else in the office? Are the LMAN settings not universal?
View 5 Replies
View Related
Apr 11, 2013
Using CAD2011, froze, I restarted it and reopened the file I was working in. In my ribbon, all layers read "0", but show the correct ByLayer color according to what layers they were on before the crash. If I list something, it shows the correct layer, and not that it's on "0". When my coworker opens the same file everything is as it should be, which leads me to believe some setting got messed up during this crash.
It is making work way more difficult than it should be - I can't see what layers are what!
View 3 Replies
View Related
Jan 26, 2012
When I open layer manager, it doesnt show my layers, it is just all blank, not even a "0" layer. I can click in the area and it shows the layer but that is it. I searched for a fix but was unable to find a fix. I have updated my graphics card driver but that didnt fix it. I have attached a screen shot to show what it looks like. I am running C3D 2009.
View 9 Replies
View Related
May 8, 2012
Layers are shown in the drop down menu from the ribbon but when I open the layer manager no layers are visible. I can click in the empty space and the layer will highlight. See attached.
System:
Core2 Quad Q9650
8GB Ram
WIN 7 64bit
FirePro V3900
AutoCAD 2012 64bit
View 6 Replies
View Related
Feb 10, 2012
When I try to add new layers the layer propert manager is notvisable. I have to hit escape to return to the drawing. I beliesve the dialog box may be trying to go to a second screen I use at home. This happens on my lap top when it is not connected to my second moniter..
View 6 Replies
View Related
Sep 1, 2009
I am missing the icons for the "ON/OFF", "FREEZE", and "LOCK" in the Layer Properties Manager in AutoCAD 2010. Recently upgraded computer to 64-bit and had to re-install 2010. Since then, it takes forever to reload the Properties Manager. Adding new layers, trying to turn layers on/off, freeze layers, etc. causes the Manager to reload. The file I am working with is only 75 kb, tiny in comparison to files I usually work with. My co-worker has a 64-bit and 2010 as well, and her Properties Manager is working just fine. Do I have to reload 2010?
View 6 Replies
View Related
Jan 19, 2012
Can you import layers from a file other than the AutoCAD types, e.g. .dwg, .dwt etc? I have made a list of layers in Excel that I would like to import into AutoCAD without having to manually create each layer at a time (there are approx 150 layers).
View 2 Replies
View Related
Sep 27, 2013
I have a problem with exporting layers from dwg to pdf. Problem is that i can export (or print) drawing but i missing some layers in layer manager in pdf. I have drawing with 150 layers (from other co-workers) but only mine 4 layers doesn't appear. I have check in ACAD in layer prop manager if they are plottable but this is not a problem for content from those 4 layers are exported in pdf but not in layers they have to be (those layers are missing)!
I use ACAD 2012
edit: i found out that layers doesn't appear because contetnt on them are only blocks. for eg. block is on layer 1 but contetnt of block is on layer 2 so i see only layer 2 in pdf but not layer 1
View 0 Replies
View Related
Aug 31, 2013
Do the people that develop (anti-endusers ) the upgrades ever think like an end user? Having the Layer Properties Manager set up with default filters that show "ALL" layers or "Xref" layers without a default for "Layers Local ONLY" is so counterintuitive and non-user friendly! This is just another example of how Autodesk has absolutely no regard for the end user.
View 2 Replies
View Related
Feb 15, 2012
What's the best method to import layers and their properties form one dwg to another?
I tried layer states manager by import .las file but it only imports the names and not the colors and linetypes.
2013 Civil 3D
View 2 Replies
View Related
Sep 28, 2001
How do I delete a layer? I am unable to even though the layer is not current, is not layer "0" or "Defpoints",is not a Xref dependent layer, nor does the layer contain any objects.
View 6 Replies
View Related
Oct 25, 2003
I have ACAD LT 2002 and when I go into layer control and try to delete layers that I no longer need, it wont let me.So I turn all of these layers on (and all others off) and delete everything visable, purge all complete and they still are there.
How do I get rid of unwanted layers that acad wont let me delete?
View 6 Replies
View Related
Nov 13, 2012
In model space if i go to layers manager and turn off a layer why does it still show up in model space. Civil 3d 2013
View 4 Replies
View Related
Oct 10, 2012
When I load a dwg file, i set all invisible layers to visible！The layer properties has been set to visible, but the entities on those invisible layers still can't see.After that I change the layout，just change the 'model' to 'layout1' Then change back to 'model' . All entities is visible!
private void AddNewLayer(Document doc)
{
if (doc.IsReadOnly)
return;
using (DocumentLock m_DocumentLock = doc.LockDocument())
{
[code]....
View 9 Replies
View Related
Jul 25, 2012
I have imported a dxf file from our Trimble handheld unit. The dxf has layers built into it that come straight from the trimble software. (ei, FENCE, TANK, WELL HEAD, FIELDLINE) I have custom built layers and linetypes for my .dwt file in Cad so I dont need the layers that followed the dxf file.
For some reason I am unable to delete those layers, I get a warning box saying:
The following layers cannot be deleted:
. layers 0 and Defpoints
. The current Layer.
. Layers containing objects.
. Xref-dependant layers
I am not on the current layer, I am pretty positive there is no objects on the layers I want to delete ( i have deleted my gps points and blocks that were imported)
I am not using any xref dwg's
View 9 Replies
View Related
Jun 27, 2012
When I use the Layer Isolate command, then use the Layer Unisolate command, everything seems to work fine, as far as displaying the correct layers again. However, when I go to the Layer Manager, I noticed that all frozen or frozen in current viewport are also turned off.
LAYISO set to OFF (use fade?)
This only happens in a maximized viewport, not in model space.
View 1 Replies
View Related
Aug 26, 2013
I am using layer translate to convert from one set of standards to another. I have created a translation file with all the desired settings and everything works fine, except the old layers remain in the drawing after translating. Is there a way to delete all of the old (unused) layers after translation?
View 1 Replies
View Related
Sep 12, 2012
Is there a way to delete all the autocad base layers that come in with my template?
View 2 Replies
View Related
Sep 13, 2012
I have the object manager pane visible at the right of my screen. It shows the layers and status of those layers in my drawing. It has the + icon that allows each layer to be expanded to show every line in that layer. The trouble I am having is that each an every time I do something in the drawing to a line it prompts the Object Manager list to expand to the full list of lines. Clicking the - icon closes this down to just the layer name.
Thing is, how do I stop it expanding the the list to the line level of detail in the first place. I rarely need that level of detail and waste lots of time closing the view down.
View 4 Replies
View Related
Aug 31, 2010
All of a sudden, though I've change nothing, my line properties are messed up, here are some of the issues
1) My line type no longer works (via layers or directly)
2) My text section within line properties no longer shows up in order to access 'text overide'
3) I can no longer change the line color.
View 1 Replies
View Related
Jul 29, 2013
lisp program to delete all objects in a drawing based on Layer excluding one layer objects.
in AutoCAD.
Example : I may have 10 layers in a drawings like 1 to 10. I need to delete all objects on 2 to 10 layers.
View 9 Replies
View Related
Jan 20, 2012
My object manager all of a sudden decided to not show the objects on the layers. If I click the "eye" on the layer it will show or hide, but the names of the objects on the layers are not listed under the layer name.
If I right click on the layer, it has the check beside visible, printable, and editable. I have Corel Draw Graphics Suite X4.
View 3 Replies
View Related
May 12, 2011
When i import a dwf it auto generates a layer for each piece of geometry in the file. There is no way to merge the layers during import that i know of.
So i just select every object and place them into the default layer0... takes 20 seconds.
Now i want to cleanup all the unused empty layers so i can make new layers later on. When i select the first layer... then SHIFT click the last layer 3dsmax lags then freezes.
When i do this same thing in 2010 the layers select properly... but once i hit delete 3dsmax freezes again! Now i know 3dsmax.. even if it freezes as long as its using any form of cpu its just processing. So i waited OVER-NIGHT just to delete a bunch of layers, and it worked! Deleting the layers one by one take 30seconds each... not going threw a thousand layers like that!
My questions: Why does deleting or even selecting a bunch of layers take a very very long time? Or even deleting one layer take a long time when theres alot of layers? Anyway to make this faster?
View 5 Replies
View Related
Nov 29, 2011
Am I able to select multiple layers at the same time and delete them at once?
View 5 Replies
View Related
