AutoCad :: Layers States Manager Not Working
Nov 21, 2012
I am using Layer States Manager in CAD2010 and have run into this problem.
I inserted an XREF into my drawing which is using LMAN. I put the XREF on a layer that is visible for the current layer state I am in. Saved the drawing then another coworker opened it and the xref was no longer visible. Even though the layer settings show as not frozen or locked the XREF won't show. If I move it onto a layer that is showing in the layer state manager it still doesn't show. I'm not sure if this is just a glitch or if I have some some setting set incorrectly.
Also are others have problems with LMAN not working after drawings are opened by someone else in the office? Are the LMAN settings not universal?
View 5 Replies
ADVERTISEMENT
Oct 24, 2012
I have 3 states setup in the Layer States dialog box. I have even edited them to make sure they are setup. But, when I choose one and hit the Restore button, they don't. However, if I go thru the command line, they do work. Is the layer states dialog broken in 2013?
View 1 Replies
View Related
Dec 6, 2013
Most our our plans sets have several (10+) plan sheets, all with the same reference drawings and layer states (properties) setup. Currently, if we need to change a particular color of a single layer, we need to open up all of the plans sheets individually and change the color (or import a layer state). This takes a lot of time.
We are looking for a third party program where we can run a batch program to update the layer states of several similar drawings automatically, without opening each individual drawing.
View 1 Replies
View Related
Jul 20, 2011
I have a Xref with multiple Layer States,
I xref'd it into a sheet with Floor plan Layer States,
nowi want to Xref it in again with the Ceiling Plan Layer Staes.
Just to be clear i want the same Xbase Xref'd in a sheet twice with 2 different layer states. how do i do this????
View 4 Replies
View Related
Jul 2, 2013
Why is it, when I restore a layer state to a blank drawing, it cannot load the linetypes saved to those layers? I get an error that says Linetypes not loaded and then wind up with a full set of layers all with CONTINUOUS linetype.
If I bring in a block from a toolpalette that has a new linetype and layer, it will create them for me just by inserting the block. Am I missing something??
View 6 Replies
View Related
Feb 16, 2013
When I click on any of the scene states manager buttons either in the quad menus or in the tools menu, nothing opens. This is the same in any of the scene states buttons (save scene state, or manage scene states). I used to use scene states frequently.
View 3 Replies
View Related
Jul 10, 2012
I can't get the 'manage scene states'-window to pop up. Tried to access it both thru the quad-menu as well as the tools-dropdown.
I've used it in previous versions, where it worked fine -for me.
View 9 Replies
View Related
Sep 20, 2006
There are some layers in my drawing that won't delete in the layers properties manager. I don't know why. It gives me 4 possible reasons:
- It might be layer 0 or a Defpoint (whatever that is).
- It is the current layer
- It is an Xref dependent layer
- It is a layer containing objects
But none of these, to my knowledge, apply. There could be things on the layer that I'm just not seeing, but I've looked thoroughly. I even zoomed out to the extents, highlighted the whole area, and clicked the erase tool, but it still won't go away. I got the file from another computer, so it might be an Xref dependent layer and the Xref'ed files just didn't come with it. How would I be able to tell - and how could I remove the Xref dependency?
Other than that, is there any other reason a layer won't delete? Can I force it to delete?
View 5 Replies
View Related
Oct 28, 2013
I'm new to dynamic blocks. In my first attempt to create a simple dynamic block with various visibility states in which each would have it's own attribute, the only attribute that works is the attribute in the first visibility state listed. I have read all the postings I could find here in the group on this subject and have made the following changes suggested here to the block:
1. All attributes have distinct tags and prompts. (I even erased all the originial attributes and created new with original tags.)
2. All attributes are locked in position.
3. I REGEN after selecting a different visibility state.
None of these changes has had any effect. Still, then only attribute that opens an attribute edit dialogue box is the "W" attribute in the first visibility state listed.
View 6 Replies
View Related
Aug 12, 2013
I remember that there used to be a command I used in an older version of AutoCad, such as "Sort Layer" or similar that would populate all of the layers used in a drawing, which solves the problem of not being able to see all the layers. I believe the default value is not set at a high enough number. What this command is?
View 1 Replies
View Related
Sep 27, 2012
I am using AutoCAD LT 2013 where I work.I am working with a Floor Plan in which the building and the Site Plan are XRefed and the drawing is very slow.
The building is small, but the XREfed Site Plan, being of a large shopping center, was as drawn by a survey company, and is large. I took out (erased) the solid hatches that indicate the concrete, to make the site a little smaller. Since I do not use the entire site plan on the recipient Floor Plan Sheet, I clipped it using XClip, so only the necessary areas and parking around the building are shown.
I notice that the recipient drawings are very slow (i.e., the Floor Plan where I am working), and the Layers Properties Manager is the worst offender, being very slow and erratic when I want to add a new layer, change layer name, etc.
The computer is a new very large computer, and I did not have this slowness problem before working with other prjects.
Is there any setting or some settings that will make the drawings faster?
View 5 Replies
View Related
Feb 29, 2012
I'm working on a drawing where I've been turning on/off a layer for parcels so I can select a well (point coverage/theme) or the parcel to get well owner and property information. All of a sudden I can't select the layer anymore - the checkbox becomes unresponsive. C3D and not map for this...
C3D 2011
Intel Xeon E5630@2.53Ghz
NVIDA Quadro NVS420 Dual Monitor
12GB Ram / Win7 Professional 64bit SP1
View 3 Replies
View Related
May 15, 2012
Reference Manager? I get (AutoCAD component has stopped working. A problem caused...)
This is as soon as I select the icon.
I can open up AutoCAD 2012 Reference Manager without any problems.
View 3 Replies
View Related
Jan 8, 2013
I am having an issue with the Properties Manager in AutoCAD 2013 LT.
When a single object is selected, the dropdown appears blank and the properties displayed are just the default drawing properties that are displayed when nothing is selected.I am unable to view/modify any object's (line, hatch, etc) properties.
My PICKFIRST variable is set to 1. This happens on any file I open with 2013 LT but does not when the same file is opened with 2007 LT. I have also reinstalled/repaired the program through the control panel. I am at a complete loss.
View 8 Replies
View Related
Apr 11, 2013
Using CAD2011, froze, I restarted it and reopened the file I was working in. In my ribbon, all layers read "0", but show the correct ByLayer color according to what layers they were on before the crash. If I list something, it shows the correct layer, and not that it's on "0". When my coworker opens the same file everything is as it should be, which leads me to believe some setting got messed up during this crash.
It is making work way more difficult than it should be - I can't see what layers are what!
View 3 Replies
View Related
Jan 26, 2012
When I open layer manager, it doesnt show my layers, it is just all blank, not even a "0" layer. I can click in the area and it shows the layer but that is it. I searched for a fix but was unable to find a fix. I have updated my graphics card driver but that didnt fix it. I have attached a screen shot to show what it looks like. I am running C3D 2009.
View 9 Replies
View Related
May 8, 2012
Layers are shown in the drop down menu from the ribbon but when I open the layer manager no layers are visible. I can click in the empty space and the layer will highlight. See attached.
System:
Core2 Quad Q9650
8GB Ram
WIN 7 64bit
FirePro V3900
AutoCAD 2012 64bit
View 6 Replies
View Related
Jan 19, 2012
I want to attach a drawing as xref to another drawing, but with maps, to be specific, with drawing manager layers, entity styles and hatch styles. I've made different maps in the same drawing with different styles, so I can change them accordingly.
I'm running AutoCAD Civil3D 2011.
View 1 Replies
View Related
Feb 10, 2012
When I try to add new layers the layer propert manager is notvisable. I have to hit escape to return to the drawing. I beliesve the dialog box may be trying to go to a second screen I use at home. This happens on my lap top when it is not connected to my second moniter..
View 6 Replies
View Related
Sep 1, 2009
I am missing the icons for the "ON/OFF", "FREEZE", and "LOCK" in the Layer Properties Manager in AutoCAD 2010. Recently upgraded computer to 64-bit and had to re-install 2010. Since then, it takes forever to reload the Properties Manager. Adding new layers, trying to turn layers on/off, freeze layers, etc. causes the Manager to reload. The file I am working with is only 75 kb, tiny in comparison to files I usually work with. My co-worker has a 64-bit and 2010 as well, and her Properties Manager is working just fine. Do I have to reload 2010?
View 6 Replies
View Related
Jan 19, 2012
Can you import layers from a file other than the AutoCAD types, e.g. .dwg, .dwt etc? I have made a list of layers in Excel that I would like to import into AutoCAD without having to manually create each layer at a time (there are approx 150 layers).
View 2 Replies
View Related
Sep 27, 2013
I have a problem with exporting layers from dwg to pdf. Problem is that i can export (or print) drawing but i missing some layers in layer manager in pdf. I have drawing with 150 layers (from other co-workers) but only mine 4 layers doesn't appear. I have check in ACAD in layer prop manager if they are plottable but this is not a problem for content from those 4 layers are exported in pdf but not in layers they have to be (those layers are missing)!
I use ACAD 2012
edit: i found out that layers doesn't appear because contetnt on them are only blocks. for eg. block is on layer 1 but contetnt of block is on layer 2 so i see only layer 2 in pdf but not layer 1
View 0 Replies
View Related
Jun 21, 2010
When I click on Layer Properties Manager, I do not get the layers palette. The same goes for typing layerpalette in command.
View 6 Replies
View Related
Aug 31, 2013
Do the people that develop (anti-endusers ) the upgrades ever think like an end user? Having the Layer Properties Manager set up with default filters that show "ALL" layers or "Xref" layers without a default for "Layers Local ONLY" is so counterintuitive and non-user friendly! This is just another example of how Autodesk has absolutely no regard for the end user.
View 2 Replies
View Related
Oct 21, 2011
" unreconciled new layers new layers were found that may need to be reconciled. view unreconciled new layers in layer properties manager
View 9 Replies
View Related
May 24, 2013
Working in AutoCAD 2013LT-my Layer Properties Manager has stopped allowing me access. When I open a drawing layers all come however I get a pop-up note that says: "ALL LAYERS ARE ALREADY INCLUDED IN THIS LAYER STATE. NO LAYERS CAN BE ADDED"
What happened-even when I try to edit layers they will not show up in the Properties Manager as changed.
View 0 Replies
View Related
Nov 13, 2012
In model space if i go to layers manager and turn off a layer why does it still show up in model space. Civil 3d 2013
View 4 Replies
View Related
Mar 29, 2013
My detail component manager in AutoCAD Architecture 2011 was working fine until I installed Revit 2013 on it (as part of Building Design Suite 2013). I have tried uninstalling and reinstalling MS .Net framework, but it has not worked.
View 2 Replies
View Related
Jun 27, 2012
When I use the Layer Isolate command, then use the Layer Unisolate command, everything seems to work fine, as far as displaying the correct layers again. However, when I go to the Layer Manager, I noticed that all frozen or frozen in current viewport are also turned off.
LAYISO set to OFF (use fade?)
This only happens in a maximized viewport, not in model space.
View 1 Replies
View Related
Jun 19, 2013
I tried installing an extension ("Dr Browns Services") from inside Photoshop CC. The install hangs. I cancelled and entered Adobe Extension Manager CC and it simply hangs on launch. I can get out of it with a forced quit. Meanwhile Photoshop itself is quite stable.How can I un freeze Adobe Xtension Manager CC?
View 1 Replies
View Related
Sep 13, 2012
I have the object manager pane visible at the right of my screen. It shows the layers and status of those layers in my drawing. It has the + icon that allows each layer to be expanded to show every line in that layer. The trouble I am having is that each an every time I do something in the drawing to a line it prompts the Object Manager list to expand to the full list of lines. Clicking the - icon closes this down to just the layer name.
Thing is, how do I stop it expanding the the list to the line level of detail in the first place. I rarely need that level of detail and waste lots of time closing the view down.
View 4 Replies
View Related
