Working in AutoCAD 2013LT-my Layer Properties Manager has stopped allowing me access. When I open a drawing layers all come however I get a pop-up note that says: "ALL LAYERS ARE ALREADY INCLUDED IN THIS LAYER STATE. NO LAYERS CAN BE ADDED"
What happened-even when I try to edit layers they will not show up in the Properties Manager as changed.
There are some layers in my drawing that won't delete in the layers properties manager. I don't know why. It gives me 4 possible reasons:
- It might be layer 0 or a Defpoint (whatever that is).
- It is the current layer
- It is an Xref dependent layer
- It is a layer containing objects
But none of these, to my knowledge, apply. There could be things on the layer that I'm just not seeing, but I've looked thoroughly. I even zoomed out to the extents, highlighted the whole area, and clicked the erase tool, but it still won't go away. I got the file from another computer, so it might be an Xref dependent layer and the Xref'ed files just didn't come with it. How would I be able to tell - and how could I remove the Xref dependency?
Other than that, is there any other reason a layer won't delete? Can I force it to delete?
I am using AutoCAD LT 2013 where I work.I am working with a Floor Plan in which the building and the Site Plan are XRefed and the drawing is very slow.
The building is small, but the XREfed Site Plan, being of a large shopping center, was as drawn by a survey company, and is large. I took out (erased) the solid hatches that indicate the concrete, to make the site a little smaller. Since I do not use the entire site plan on the recipient Floor Plan Sheet, I clipped it using XClip, so only the necessary areas and parking around the building are shown.
I notice that the recipient drawings are very slow (i.e., the Floor Plan where I am working), and the Layers Properties Manager is the worst offender, being very slow and erratic when I want to add a new layer, change layer name, etc.
The computer is a new very large computer, and I did not have this slowness problem before working with other prjects.
Is there any setting or some settings that will make the drawings faster?
" unreconciled new layers new layers were found that may need to be reconciled. view unreconciled new layers in layer properties manager
View 9 Replies View RelatedDo the people that develop (anti-endusers ) the upgrades ever think like an end user? Having the Layer Properties Manager set up with default filters that show "ALL" layers or "Xref" layers without a default for "Layers Local ONLY" is so counterintuitive and non-user friendly! This is just another example of how Autodesk has absolutely no regard for the end user.
View 2 Replies View RelatedMy object manager all of a sudden decided to not show the objects on the layers. If I click the "eye" on the layer it will show or hide, but the names of the objects on the layers are not listed under the layer name.
If I right click on the layer, it has the check beside visible, printable, and editable. I have Corel Draw Graphics Suite X4.
When I enter CTRL+1 at the command line I get this Properties doesn't show scale.jpg What I want is this Properties Manager nestly's last dialog.jpg with the capability to adjust Scale X, Y, and Z.
How do I get this one?
Typically when I click on the Set Origin button, all I then have to do is click on the page where I want the hatch origin to be, and everything works just fine.
I work on a shared computer. Start working this morning, and now when I click on the Set Origin button, it prompts me to inform it "SIngle or SUbobject?". And through a number of further selections, I can eventually get around to selecting my origin and having things shift around properly. But that really slows me up. Seems like one of the system variables got changed. I've doodled around a bit online, but haven't been able to find how to get things back to how they used to be.
And I tried opening a new page, restarting the program, etc., and the new way the button works has taken hold. I can't get it to reset. So on my computer (not working properly) when you click on the Set Origin button, the command line says "Command: _-hatchedit select hatch objects..select hatch objects: _S" then it says "ambiguous response, please clarify" "SIngle or SUbobject?"
On the computers that are working properly it only displays the "select hatch objects: _O" and doesn't show the _S part.
We have just upgraded to 2012 map 3d and now every time I open a drawing whether or not in the sheet set manager or straight from the file location, the layer properties manager opens with it. Is there a way to make it not open every time a drawing is opened?
View 2 Replies View RelatedI'm working on a CAD file created from a surveying company. In layer properties manager I cannot change the layer color to a different color, keeps defaulting back to the original color.
How do I change the layer color?
Run into an issue in AutoCAD Map 3D 2012 when multiple raster images (in this case 66 ortho images) are attached as data connections, you cannot see New Layers when you create them in the default Layer Properties Manager?
I have found using the Classic Layer Properties Manager is a work around.
It doesn’t seem to matter if the ortho images are connected individually or grouped as a single layer.
I'm running Map 3D with SP2 applied.
All of a sudden this morning clicking Layer Properties Manager gives my acadlt07 a fatal error. (unhandled e06d7363h Exception at 75509673h).
I thought it might be the file I was working on but it is happening with any file open.
i have recently upgraded from 08' LT to 12'LT and i have an intermittent issue with the Layer properties box.sometimes when i open the layers list and want to change layer name, color, linetype etc it will discard all changes when i close the box and the command line will show something like this
Command: _layer
Command:
Unknown command "-LAYER". Press F1 for help.
the Layer box opens and works as normal but makes no changes to the drawing.if i reopen the layer prop box it will then work, it seems to be completely at random whether it works or not.
AutoCAD LT 2007 - Cannot view Later Properties Manager when requested.
View 5 Replies View RelatedI am having an issue with the Properties Manager in AutoCAD 2013 LT.
When a single object is selected, the dropdown appears blank and the properties displayed are just the default drawing properties that are displayed when nothing is selected.I am unable to view/modify any object's (line, hatch, etc) properties.
My PICKFIRST variable is set to 1. This happens on any file I open with 2013 LT but does not when the same file is opened with 2007 LT. I have also reinstalled/repaired the program through the control panel. I am at a complete loss.
I have a SSM set up with both Sheet Custom Properties and Sheet Set Custom Properties.
When I start a new project, i can populate both areas of the main SSM. I'll create my sheets and have them self populated by the "root" SSM settings (if you will)well now, lets say i need to change the date of the sheets from the past.. to the future submittal date. I set it in the "Sheet Custom Properties" in the "root" SSM and then I have to go to each sheet; right click --> Properties each sheet and change the custom properties.
Basically, is there a way to have the sheets (after created) to automatically update to the new date?
When I click the layer prop. man. icon, I get a list of all the possible commands, but not the window it's supposed to show.
View 2 Replies View RelatedIn ACLT 2008, I was able to resize the window in the layer properties manager to what was convenient for me. In ACLT 2010, I am unable to change either the size or the position of the window. The same is true of the Design center window. Is this something that is permanently changed, or is there maybe a fix coming to allow this convenience in the future? Or have I missed some system variable which controls this?
View 3 Replies View RelatedI've created a VB.NET routine to update blocks, layers and layer filters from a source drawing.
After updating filters and when the command is finished (dialog closed), the Layer Properties Manager palette MAY not update to show the new set of filters although visually you can see that it does appear to refresh itself.
Whether it updates seems to depend on which filter is active and which filters are added.For example, I have properties filters A, B, C, D and E, and B and E have subfilters B1-B8 and E1-E9.
If Filter E3 is removed as a test and the parent filter E is active, when the command is done, E3 should appear back in the list, but it does not show until the palette is closed and reopened. If filter B is active, then the list will refresh and E3 will show immediatlely after the command exits.
I have added a dialog to my routine to inform the user they may have to close the palette and reopen to get the proper display.
I have tried Editor.UpdateScreen() but that does not work.
One of my CAD techs is having an issue with the Layer Properties Manager Palette. When she opened AutoCAD, the palette was gone. When she tried to bring it up with "LAYERPALETTE", she gets the "unknown command" message. When she tried to bring it up using "LA" or "LAYER" or the button on the ribbon, she gets a bunch of options in the command line.
How can we get the Layer Properties Manager Palette back?
C3D 2013
Windows 7
64 bit
I installed ACAD LT 2011 in my new HP Win7 computer, and the font in the Layer Properties Manager box is so large that it is unreadable. I have attached a file showing a 'print screen'. I need directions on how to put the text back to normal size. I had no problems with this program in my old Dell computer.
View 3 Replies View RelatedAs I recall, in previous versions of AutoCAD, when I am in the Layer Properties Manager and I click on an xref under the Xref heading, the only layers shown were the ones in that xref, not all.
That is what is happening now. I cannot seem to find any setting under the settings for the Layer Properties Manager that would change this.
I currently use code similar to Lee Ambrosius's 2009 AU handout that shows how to set/create custom properties. URL.... search for the header 'Adding Sheet Set and Sheet Properties'.
I have now accumulated numerous unused custom properties in my sheet set. I haven't been able to find a way to delete these additional custom properties.
Because I use multiple subsets with multiple sheets for printing, I would rather not have to go through all the sheets, store all the custom properties I need, destroy all the existing custom properties, and then re-create just the ones I need. how to delete individual custom properties.
I am currently running AutoCAD 2012 and have lost the capabilities to dock my Layer Properties Manager.
View 2 Replies View RelatedI'm having an issue where the Layer Properties Manager Dialog Box appears to be anchored. Meaning I can't move or resize the dialog box.
View 4 Replies View RelatedI have AutoCAD (2013) set up with two anchored windows on the left-hand side of my screen - layer properties, and then anchored below it the design centre. What can I do to make sure that my layer properties manager always stays anchored to the TOP of the LHS, and the design centre BELOW it, because they switch around when I open a new drawing?
View 3 Replies View RelatedWhen I click on Layer Properties Manager, I do not get the layers palette. The same goes for typing layerpalette in command.
View 6 Replies View RelatedIs it possible to maximize the layer properties manager's windows so that all columns are visible with no need for horizontal scolling?
View 2 Replies View RelatedI have recently loaded Autocad 2013 and am having trouble with the text showing up in the Layer properties manager dialogue box, all information about the layers is whited out.
Is this a transparency setting?
I am unsure what to change/set to correct this so I can see layer informaion in the dialogue box.
I have been having this issues as of recently, and i am now no longer able to use my "Layer Properties Manager"
Every time that i try to open the "LPM" it gives me an error that says
I have never seen this error before but its making it very miserable for me to have to seperate my work in layers without the use of the "LPM"
I have already un-installed & re-installed twice frankly i don't have anymore time to do this because i have deadlines i need to meet and its becoming a very big pain.
what happened but the layer properties manager box does not open any more?
View 9 Replies View Related