Layers are shown in the drop down menu from the ribbon but when I open the layer manager no layers are visible. I can click in the empty space and the layer will highlight. See attached.
System:
Core2 Quad Q9650
8GB Ram
WIN 7 64bit
FirePro V3900
AutoCAD 2012 64bit
Using CAD2011, froze, I restarted it and reopened the file I was working in. In my ribbon, all layers read "0", but show the correct ByLayer color according to what layers they were on before the crash. If I list something, it shows the correct layer, and not that it's on "0". When my coworker opens the same file everything is as it should be, which leads me to believe some setting got messed up during this crash.
It is making work way more difficult than it should be - I can't see what layers are what!
Do the people that develop (anti-endusers ) the upgrades ever think like an end user? Having the Layer Properties Manager set up with default filters that show "ALL" layers or "Xref" layers without a default for "Layers Local ONLY" is so counterintuitive and non-user friendly! This is just another example of how Autodesk has absolutely no regard for the end user.
View 2 Replies View RelatedWhen I use the Layer Isolate command, then use the Layer Unisolate command, everything seems to work fine, as far as displaying the correct layers again. However, when I go to the Layer Manager, I noticed that all frozen or frozen in current viewport are also turned off.
LAYISO set to OFF (use fade?)
This only happens in a maximized viewport, not in model space.
When I try to add new layers the layer propert manager is notvisable. I have to hit escape to return to the drawing. I beliesve the dialog box may be trying to go to a second screen I use at home. This happens on my lap top when it is not connected to my second moniter..
View 6 Replies View RelatedI remember that there used to be a command I used in an older version of AutoCad, such as "Sort Layer" or similar that would populate all of the layers used in a drawing, which solves the problem of not being able to see all the layers. I believe the default value is not set at a high enough number. What this command is?
View 1 Replies View RelatedWhen I load a dwg file, i set all invisible layers to visible！The layer properties has been set to visible, but the entities on those invisible layers still can't see.After that I change the layout，just change the 'model' to 'layout1' Then change back to 'model' . All entities is visible!
private void AddNewLayer(Document doc)
{
if (doc.IsReadOnly)
return;
using (DocumentLock m_DocumentLock = doc.LockDocument())
{
[code]....
When I open layer manager, it doesnt show my layers, it is just all blank, not even a "0" layer. I can click in the area and it shows the layer but that is it. I searched for a fix but was unable to find a fix. I have updated my graphics card driver but that didnt fix it. I have attached a screen shot to show what it looks like. I am running C3D 2009.
View 9 Replies View RelatedI am missing the icons for the "ON/OFF", "FREEZE", and "LOCK" in the Layer Properties Manager in AutoCAD 2010. Recently upgraded computer to 64-bit and had to re-install 2010. Since then, it takes forever to reload the Properties Manager. Adding new layers, trying to turn layers on/off, freeze layers, etc. causes the Manager to reload. The file I am working with is only 75 kb, tiny in comparison to files I usually work with. My co-worker has a 64-bit and 2010 as well, and her Properties Manager is working just fine. Do I have to reload 2010?
View 6 Replies View RelatedCan you import layers from a file other than the AutoCAD types, e.g. .dwg, .dwt etc? I have made a list of layers in Excel that I would like to import into AutoCAD without having to manually create each layer at a time (there are approx 150 layers).
View 2 Replies View RelatedI have a problem with exporting layers from dwg to pdf. Problem is that i can export (or print) drawing but i missing some layers in layer manager in pdf. I have drawing with 150 layers (from other co-workers) but only mine 4 layers doesn't appear. I have check in ACAD in layer prop manager if they are plottable but this is not a problem for content from those 4 layers are exported in pdf but not in layers they have to be (those layers are missing)!
I use ACAD 2012
edit: i found out that layers doesn't appear because contetnt on them are only blocks. for eg. block is on layer 1 but contetnt of block is on layer 2 so i see only layer 2 in pdf but not layer 1
" unreconciled new layers new layers were found that may need to be reconciled. view unreconciled new layers in layer properties manager
View 9 Replies View RelatedIn model space if i go to layers manager and turn off a layer why does it still show up in model space. Civil 3d 2013
View 4 Replies View RelatedWhen I click the layer prop. man. icon, I get a list of all the possible commands, but not the window it's supposed to show.
View 2 Replies View RelatedI have a Xref with multiple Layer States,
I xref'd it into a sheet with Floor plan Layer States,
nowi want to Xref it in again with the Ceiling Plan Layer Staes.
Just to be clear i want the same Xbase Xref'd in a sheet twice with 2 different layer states. how do i do this????
Let's say you create a floor plan, and you use the Layer State manager to separate the framing plan, finish plan, reflected ceiling plan, etc. Now, when you go to create a sheet, you xref this plan into model space with all of the layers thawed/on, go to your titleblock in paper space and make a viewport.
Currently, if I click into a viewport and use the Layer State manager to show just the information of the RCP, it will freeze all of the layers I don't need, but it will freeze those layers in model space, instead of just within the viewport. It gets very time consuming doing it the way I always understood to do it; making sure all layers are thawed/on in model space, and then going into each viewport and manually VP-freezing each layer I don't need.
So can Layer States be set up to work within viewports, to only have those layers VP-frozen?
What is the layer "Status" in the layer property manager? It doesn't correlate with the On/Off or Freeze/Thaw . The icon appears to be a sheet of paper but some are blue and others are gray. I cant tell what makes them change colors from blue to gray.
View 4 Replies View RelatedI have noticed when changing colors in the layer manager it does not take the first time and sometimes the second either. It does not seem to matter if creating a new layer or simply modifying existing.
View 9 Replies View RelatedIt happens when you turn on layer manager to adjust each layer settings such as name, line type or color and etc.
Problem is that each layer row disappears and each time it happens, only solution I know is to restart the computer. See the attached image.
Most annoying thing, the VP Freeze and New VP Freeze columns in the Layer Properties Manager keep resetting themselves to original position. I've done all the proflie stuff, re-save it after changing it, re-load it when I find the error, etc.. and still it reverses every time I restart AutoCAD.
What is it with the columns in dialog boxes? I've posted how the column widths in the File Dialog box reset everytime too. How they don't follow windows folder options. Is this some Windows issue or AutoCAD issue?
my layer manager menu button icons have been replaced by hatch patterns this morning …. see attached .... Interesting.
I must have loaded the impressionist.cui interface this morning by mistake.
No doubt a restart will cure the issue.
I have a viewport in paper space with most layers set to "VP Freeze". When I save the drawing or when a auotsave occurs, the frozen layers become visible again in the viewport even though they are still marked as frozen. The only way I can get the viewport to display correctly again is to close the drawing and re-open it. How I can stop this from happening?
View 9 Replies View RelatedLayer manager keep loosing the icons that represent a function. When you open layer manager, there are some icons on top of the layer manager page, one functions as make layer current, the other one to create a new layer & so on. these icons after a few time that we use layer command they all disappear, the only way to fix it is to close autocad & open it again. Of course if we use classic layer manager then things are ok but classic layer manage rhas uts own problems & limitations also.
My own guess is that the commad "layer" which invoke layer manager has memory leak, & when it is used a few time basically makes your system works on less memory resources & the only way to fix it is to abort the operation & start every thing all over again.
I'm using Xara P&GD 7. My Page & Layers Gallery doesn't show layers. how I can find and start using Layers tab?
View 2 Replies View RelatedWhen I insert a drawing from another source as a block into one my drawing - and then explode the block and change the exploded block layers to my layers. Then I purge out the old layers. Normally this works fine, but I have lately had trouble getting rid of some unwanted layers as everytime I have tried, I get the message that they are x-ref dependent and cannot be deleted or purged. I have tried to isolate them by freezing and turning off everything else, but there are no features, entities, "specks" whatever, to erase. I have looked at the xref command, and my drawing shows no rogue xrefs. I am not sure what to do to get rid of these layers.
View 8 Replies View RelatedIn Photoshop, there is a shortcut that does the following:
Ctrl + Alt + Shift + E — You’ll get a new layer at the top of the layer stack containing a merged representation of all visible layers (handy for sharpening adjustments, etc.).
I tried this in PSP X3 and it doesn't work. Does it even possible to do this in PSP? I know how to merge all the layers in PSP but all the merged layers then disappear. The Photoshop feature keeps all the visible layers and merges them into a combined merged visible layer.
If you've ever created an image having multiple assorted layers, and want to apply a modification to the final image while keeping those original layers intact, here's the script to do that:
Select allfrom PSPApp import *
def ScriptProperties():
return {
'Author': u'Ken Arway',
'Copyright': u'2013',
'Description': u'Copies all visible layers to a newly created ra'
u'ster layer.',
[code]....
Just use your favourite text editor to copy that code into a text file, and save the file as "CopyVisibleMergedToNewLayer.pspscript" in your user scripts directory. Doesn't matter if it's the "Restricted" or "Trusted" directory.
As the name implies, all the visible layers will be copied and merged, so it's easy to first "hide" the layers you don't want merged before running the script.
Yes, it's just a series of recorded actions; but the key is its use of the "Select All" and "Paste Into Selection" actions -- that ensures that the resulting merged layer maintains the same positioning as the individual layers. In other words, if your original layers have a transparent background and opaque areas that are off-center, simply using Edit...Paste As New Layer will center those opaque areas in the canvas, which is not what you want....
There are some layers in my drawing that won't delete in the layers properties manager. I don't know why. It gives me 4 possible reasons:
- It might be layer 0 or a Defpoint (whatever that is).
- It is the current layer
- It is an Xref dependent layer
- It is a layer containing objects
But none of these, to my knowledge, apply. There could be things on the layer that I'm just not seeing, but I've looked thoroughly. I even zoomed out to the extents, highlighted the whole area, and clicked the erase tool, but it still won't go away. I got the file from another computer, so it might be an Xref dependent layer and the Xref'ed files just didn't come with it. How would I be able to tell - and how could I remove the Xref dependency?
Other than that, is there any other reason a layer won't delete? Can I force it to delete?
We have a number of standard layer group filters. We also have a utility that allows us to re-create our standard layers with the push of a button, making it easy to use the PURGE command to keep the drawings clean.
We have noticed that once we purge our layers out, the group filters are broken. After reinserting the standard layers, some of them show no layers, and others show all of the layers, neither of which is correct. It seems that once a Group Layer Filter no longer sees the layers it was set to include in the layer list, it forgets all its settings and becomes useless.
How can we continue to use PURGE without losing the functionality of our layer filters?
Why a layer state assigned to a viewport can only restrict the layers showing? I want my viewport to show the proper layers all the time, even when those layers are not visible in model space.
C3D 2012 SP2.1
WIndows 7 SP1 64 bit
24GB RAM
Dual quad core xeon 3.2ghz cpu's
Triple Monitors
I have a drawing where I need to open the layer manager to turn on a layer in a view port but cannot get to that particular column. As you look across the top of the layer manager I can see all the headings of each column beginning with "Name", "Status", "On" and so forth. The last column heading I see is "Description" but I need to go even further to the right to get to the column I need to be at but can't get there. There is no scroll button on the bottom of the layer manager which would allow me to do that.
View 7 Replies View Related