AutoCad :: Missing Icons For Layers In Layer Manager
Sep 1, 2009
I am missing the icons for the "ON/OFF", "FREEZE", and "LOCK" in the Layer Properties Manager in AutoCAD 2010. Recently upgraded computer to 64-bit and had to re-install 2010. Since then, it takes forever to reload the Properties Manager. Adding new layers, trying to turn layers on/off, freeze layers, etc. causes the Manager to reload. The file I am working with is only 75 kb, tiny in comparison to files I usually work with. My co-worker has a 64-bit and 2010 as well, and her Properties Manager is working just fine. Do I have to reload 2010?
View 6 Replies
ADVERTISEMENT
Jun 10, 2013
LT 2014 Menu Buttons missing from top of Layer Properties Manager Window (see attachment).Works fine in LT 2013. What changed between the two versions that causes this?
View 9 Replies
View Related
Nov 9, 2012
my layer manager menu button icons have been replaced by hatch patterns this morning …. see attached .... Interesting.
I must have loaded the impressionist.cui interface this morning by mistake.
No doubt a restart will cure the issue.
View 9 Replies
View Related
Feb 14, 2012
Layer manager keep loosing the icons that represent a function. When you open layer manager, there are some icons on top of the layer manager page, one functions as make layer current, the other one to create a new layer & so on. these icons after a few time that we use layer command they all disappear, the only way to fix it is to close autocad & open it again. Of course if we use classic layer manager then things are ok but classic layer manage rhas uts own problems & limitations also.
My own guess is that the commad "layer" which invoke layer manager has memory leak, & when it is used a few time basically makes your system works on less memory resources & the only way to fix it is to abort the operation & start every thing all over again.
View 9 Replies
View Related
Aug 12, 2013
I remember that there used to be a command I used in an older version of AutoCad, such as "Sort Layer" or similar that would populate all of the layers used in a drawing, which solves the problem of not being able to see all the layers. I believe the default value is not set at a high enough number. What this command is?
View 1 Replies
View Related
Apr 11, 2013
Using CAD2011, froze, I restarted it and reopened the file I was working in. In my ribbon, all layers read "0", but show the correct ByLayer color according to what layers they were on before the crash. If I list something, it shows the correct layer, and not that it's on "0". When my coworker opens the same file everything is as it should be, which leads me to believe some setting got messed up during this crash.
It is making work way more difficult than it should be - I can't see what layers are what!
View 3 Replies
View Related
Jan 26, 2012
When I open layer manager, it doesnt show my layers, it is just all blank, not even a "0" layer. I can click in the area and it shows the layer but that is it. I searched for a fix but was unable to find a fix. I have updated my graphics card driver but that didnt fix it. I have attached a screen shot to show what it looks like. I am running C3D 2009.
View 9 Replies
View Related
May 8, 2012
Layers are shown in the drop down menu from the ribbon but when I open the layer manager no layers are visible. I can click in the empty space and the layer will highlight. See attached.
System:
Core2 Quad Q9650
8GB Ram
WIN 7 64bit
FirePro V3900
AutoCAD 2012 64bit
View 6 Replies
View Related
Jan 19, 2012
Can you import layers from a file other than the AutoCAD types, e.g. .dwg, .dwt etc? I have made a list of layers in Excel that I would like to import into AutoCAD without having to manually create each layer at a time (there are approx 150 layers).
View 2 Replies
View Related
Sep 27, 2013
I have a problem with exporting layers from dwg to pdf. Problem is that i can export (or print) drawing but i missing some layers in layer manager in pdf. I have drawing with 150 layers (from other co-workers) but only mine 4 layers doesn't appear. I have check in ACAD in layer prop manager if they are plottable but this is not a problem for content from those 4 layers are exported in pdf but not in layers they have to be (those layers are missing)!
I use ACAD 2012
edit: i found out that layers doesn't appear because contetnt on them are only blocks. for eg. block is on layer 1 but contetnt of block is on layer 2 so i see only layer 2 in pdf but not layer 1
View 0 Replies
View Related
Aug 31, 2013
Do the people that develop (anti-endusers ) the upgrades ever think like an end user? Having the Layer Properties Manager set up with default filters that show "ALL" layers or "Xref" layers without a default for "Layers Local ONLY" is so counterintuitive and non-user friendly! This is just another example of how Autodesk has absolutely no regard for the end user.
View 2 Replies
View Related
Oct 21, 2011
" unreconciled new layers new layers were found that may need to be reconciled. view unreconciled new layers in layer properties manager
View 9 Replies
View Related
Nov 13, 2012
In model space if i go to layers manager and turn off a layer why does it still show up in model space. Civil 3d 2013
View 4 Replies
View Related
Jun 27, 2012
When I use the Layer Isolate command, then use the Layer Unisolate command, everything seems to work fine, as far as displaying the correct layers again. However, when I go to the Layer Manager, I noticed that all frozen or frozen in current viewport are also turned off.
LAYISO set to OFF (use fade?)
This only happens in a maximized viewport, not in model space.
View 1 Replies
View Related
Mar 3, 2013
The 'Template' checkbox gets activated in Layer Options dialog box, and the box gets closed, then, the Layer name and several icons at the bottom of the Layer Panel disappear.The Layer is still there without a name, and rolling over the icons on the Layers Panel I can see the Tool Icons.Illustrator Prefs were trashed/restored using the Opt-Shift-Command restart shortcut.
View 2 Replies
View Related
Sep 20, 2006
There are some layers in my drawing that won't delete in the layers properties manager. I don't know why. It gives me 4 possible reasons:
- It might be layer 0 or a Defpoint (whatever that is).
- It is the current layer
- It is an Xref dependent layer
- It is a layer containing objects
But none of these, to my knowledge, apply. There could be things on the layer that I'm just not seeing, but I've looked thoroughly. I even zoomed out to the extents, highlighted the whole area, and clicked the erase tool, but it still won't go away. I got the file from another computer, so it might be an Xref dependent layer and the Xref'ed files just didn't come with it. How would I be able to tell - and how could I remove the Xref dependency?
Other than that, is there any other reason a layer won't delete? Can I force it to delete?
View 5 Replies
View Related
Oct 9, 2012
AI CS6 Layers panel missing labels when you deselect print in the layer options. Is this a bug? I noticed this on a furnished file at work on a MacPro and had a hard time working the file because all of the labels were missing.
I stumbled on the cause when I turned on the Print Layer and all the labels came back. To be sure it was not computer related, I made a file on my AI CS6 version 16.1.0 with the same result. See screen shot.
MacBook Pro, OSX 10.6.8, 2.8 GHz Intel Core 2 Duo, 4 GB 1067 MHz DDR3.
View 2 Replies
View Related
Oct 6, 2011
I have a drawing where I need to open the layer manager to turn on a layer in a view port but cannot get to that particular column. As you look across the top of the layer manager I can see all the headings of each column beginning with "Name", "Status", "On" and so forth. The last column heading I see is "Description" but I need to go even further to the right to get to the column I need to be at but can't get there. There is no scroll button on the bottom of the layer manager which would allow me to do that.
View 7 Replies
View Related
Jan 7, 2013
I have a client experiencing a layer manager dialog box issue - the layer names are disappearing... This is not happening all the time - and in different files.
I have attached an image below.
View 4 Replies
View Related
Mar 25, 2011
you can match the layer filters with in the layer manager to the drop down on the ribbon..so how do i get the to match so the filter im viewing in the manager is what i see in the ribbon.
View 1 Replies
View Related
Aug 14, 2013
I am trying to find the individual icons in the ribbon back in my Autocad Lite. For example all the small icons under the "Clip" tab have disappeared.
How do I get them back?
View 9 Replies
View Related
Jul 9, 2009
"Why do my icons on a toolbar display as a cloud with a question mark " I have lost my Civil 3d icons whilst playing with new custom toolbars. The acad ones are there not lost!
1 Sure but where are the Autocad icons actually hidden?
2 Why did they get lost in the first place ? The cui does some odd things at times.
3 What is the right spot to add the path changing file support paths makes no difference. (includes reboots)
Other machines here are fine don't want the same problem with theirs when we add the new toolbars.
As an extra we run new workspaces to avoid this problem but the original Civil 3D workspace is corrupt maybe.
View 4 Replies
View Related
Nov 18, 2011
How to get the classic layour manger to use the ACA layer manager tools?
In 2008 before the floating layer manager the manager looked as the Classic version does now in AutoCAD ACA 2012 with the tool of "new layer from standard". This tool now only seems to be in the floating layer manager and when I switch to Classic manager the "new layer from standard" is removed from the dialog box.
I want to use the classic dialog but have access to the "new layer from standard" tool
View 2 Replies
View Related
Sep 29, 2010
With 2011 I have noticed my DWG icons in explorer are displaying the generic icon and not the new DWG icon.I have gone through the Folder options and File Types tab to try to reassign it but no luck.
View 5 Replies
View Related
Nov 18, 2011
I'm currently using AutoCAD LT 2012 and when I create a new layer and set it as current in the layer manager, regardless of what color I set the new layer to, the new layer's color remains the same as the previous one in the properties box even though the colors of the layers are always set to "by layer."
View 3 Replies
View Related
May 2, 2013
i miss my "create view" etc. buttons in my layout ribbon. Where can i find an option to make them visible?
View 4 Replies
View Related
Apr 22, 2013
I went to use my laptop with autocad LT 2012 which I do not use that much. When I lookd all the Icons on the tool bars are missing. The tabs still work but it is hard to figure out what they do. I have not changed any settings.
View 6 Replies
View Related
Nov 1, 2012
in this image, I am showing the Options dialog box of AutoCAD Architecture 2013. This was a typical installation, no customization at all, but several icons are missing, showing just a question mark instead.
View 3 Replies
View Related
May 17, 2012
I thought I had a grasp of the CUI routine, but apparently not. I copied the Image panel from the "Insert" Ribbon tab in Task-based Geospatial, and got it where I wanted. The commands are there, but the images are not - just the infamous cloud with "?". I can go back into Task-based Geospatial workspace and the icons are there, but I can't figure out where they are being referenced. Are they embedded here somehow? In the CUI under both the main .cuix list of ribbon panels and those for the partial workspace for TASKBASEDRIBBON, the button images are not linked to anything, just the cloud with "?" It seems that I need to be able to copy the Image panel from the right side window (when Task-based Geospatial is set to current) over to the main .
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
View 3 Replies
View Related
Jul 24, 2013
I have been using Sheet Set Manager but lately I have noticed that the drawing previews are missing. Is there to make SSM show drawing previews?
View 1 Replies
View Related
Jun 1, 2013
Have installed inventor 2014 as part of the Product Design Suite Premium 2014 & have a few issues.
1). In sketch mode when drawing a line/circle etc there is usually a green dot in the centre of the crosshair, this is not vissible at all making it difficult (if not impossible) to see where the cursor is snapping to. The same happens in the drawing mode when dimensioning. I've checked the options but can't see anything obvious.
2). The icons in the 'Navigation Bar' are invisible, I've checked the opacity levels & irrespective of the setting they are still invisible. You can hover the mouse pointer over where they should be & they work, they're just not visible.
Also, the close, minimise & restore down icons in the top right corner are also invisible. Similar to the navigation bar issue, they work, they're just invisible.
Have tried uninstall & reinstall, & have downloaded & installed the update, but this doesn't solve these issues.
View 4 Replies
View Related
