I want to attach a drawing as xref to another drawing, but with maps, to be specific, with drawing manager layers, entity styles and hatch styles. I've made different maps in the same drawing with different styles, so I can change them accordingly.
I'm running AutoCAD Civil3D 2011.
I'm working on a drawing where I've been turning on/off a layer for parcels so I can select a well (point coverage/theme) or the parcel to get well owner and property information. All of a sudden I can't select the layer anymore - the checkbox becomes unresponsive. C3D and not map for this...
C3D 2011
Intel Xeon E5630@2.53Ghz
NVIDA Quadro NVS420 Dual Monitor
12GB Ram / Win7 Professional 64bit SP1
There are some layers in my drawing that won't delete in the layers properties manager. I don't know why. It gives me 4 possible reasons:
- It might be layer 0 or a Defpoint (whatever that is).
- It is the current layer
- It is an Xref dependent layer
- It is a layer containing objects
But none of these, to my knowledge, apply. There could be things on the layer that I'm just not seeing, but I've looked thoroughly. I even zoomed out to the extents, highlighted the whole area, and clicked the erase tool, but it still won't go away. I got the file from another computer, so it might be an Xref dependent layer and the Xref'ed files just didn't come with it. How would I be able to tell - and how could I remove the Xref dependency?
Other than that, is there any other reason a layer won't delete? Can I force it to delete?
I am preparing 3D model of a 354 acres campus area. I am using AutoCAD Map 3D 2011. I have extruded all the building as AutoCAD drawing objects. I have also imported DEM of the area into AutoCAD. Now, how can I use this DEM to specify the Earth surface elevation or surface profile of my 3D building models so that all my 3D buildings read the Earth surface profile information from DEM.
View 2 Replies View RelatedI have a main drawing that I want to pull into another drawing as an XRef. When I try and attach the drawing as an attachment I get then message *Invalid* in the command line.
I have taken the drawings off the network and put them directly on my computer to make sure that it is not a network issue, but I still cannot attach the drawing.
I have an older version of autocad - Autocad LT 2007 - and am trying to attach a dwf I convertedfrom a pdf using design review 2013) in model space. The rectangle of what I imagine is the dwf appears, but there is no content.
View 6 Replies View RelatedI am attempting to attach a title block into a layout. This is my process:
1. Go to Building1 drawing, and go to layout. Without any viewports created, I attach a dwg file named titleblock1.
2. When I specifiy the location and scale, I cannot find the attached drawing.
why can't I attach files larger than 1.5 KB? I can't attach anything useful!
Using AutoCAD Map 3D 2010, I'd like to create a new legend for my map ("Tools > Create Legend").I'm trying to follow the steps shown on this video: URL....but there's no "Tools" option in my "Display Manager" tab.
View 1 Replies View RelatedI have many layers of data being FDO / SDF and Native Autocad Layers in the Display Manager which controls the DRAW ORDER. I also have 2-3 XREF's attached which when inserted create a separate layer in the Layer Properties. I am trying to separate these XREF layers from the Map base layer and have a new layer created in the DISPLAY MANAGER for each of the xref''s. I right click in the display manager and go DATA>ADD DRAWING DATA>DRAWING LAYER and select the Xref layers. They successfully get inserted into the DISPLAY MANAGER but when checking them on/off, it doesn't control its display. It appears they are still on the MAP BASE.
View 3 Replies View RelatedI have to add a style text in a display manager. When i add it, i have a option to scale this text. It is possible to have possibility to scale the text as a same height in multiple viewport in a layout... example (* 10 (VIEWPORTSCALE)) but this line does'n work
View 4 Replies View RelatedI imported data from a SHP file to a base drawing I plan to use to attach, and I wanted to replace data points with data symbol definition blocks. However, when I create a symbol style and try to edit it by double-clicking, I get a *Cancel* on the command line and nothing happends. When I pressing the "Style" button on the Display Manager tab in the Task Pane, same thing.I suspect that I missed a step - or several - along the way of importing the SHP file.
View 2 Replies View RelatedWhen opening the layers dialogue box in AutoCAD 2013 the display does not appear to load correctly, I have had this problem before when executing this command and loaded up the old layer manager, I can't remember what the command is for load this.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I created a drawing with multiple layout tabs, so as to create different maps. My display manager consists of data connections & layers added from the Layer Properties Manager. When I activate a viewport from the layout, I want to freeze some of the Data Connection items (like shp files). How can I freeze these items within the active viewport only?
View 9 Replies View RelatedIt happens when you turn on layer manager to adjust each layer settings such as name, line type or color and etc.
Problem is that each layer row disappears and each time it happens, only solution I know is to restart the computer. See the attached image.
NOTE: This is in AutoCAD 2002.
I'm working on one of our standard layouts for a client. Our typical drawing setup is the base drawing file, surrounded by our Xref'ed border. On said border Xref, we have all the information that does not change between drawings (Revision history, address of job site, etc). The only things that change - and, thus, are not on the xref - are the title of each individual sheet and their number; in the case of these objects, they are located on the drawing file itself in the appropriate position. They are, however, the same font as the text in the Xref - "Standard". Or, at least, they're supposed to be.
The text in the base drawing file seems to be a different version of the text from the Xref - a much blockier, sharper-edged version than the Xref text. My first response was "Okay - I'll just copy/paste the text from the border into my base drawing file, and force the existing text to match the properties of the imported text."
This, however, did not work. The imported text automatically assumed the same form as the existing text. Here's a screenshot from the base drawing, illustrating this (The "Mechanical Plan" also exists on the base drawing, and not the Xref):
I copied the existing text from the base drawing (In this case, the "Mechanical Plan") and pasted it directly into the Xref itself, to see what would happen. Apparently, it wants to stay blocky:
In the latter example, I even tried to force the blocky text to assume the properties of the smooth text via MA (Match properties). I specifically need to make the text in the base drawing conform to the style that the text is assuming in the Xref - which is to say "Smooth."
I remember that there used to be a command I used in an older version of AutoCad, such as "Sort Layer" or similar that would populate all of the layers used in a drawing, which solves the problem of not being able to see all the layers. I believe the default value is not set at a high enough number. What this command is?
View 1 Replies View RelatedI am using AutoCAD LT 2013 where I work.I am working with a Floor Plan in which the building and the Site Plan are XRefed and the drawing is very slow.
The building is small, but the XREfed Site Plan, being of a large shopping center, was as drawn by a survey company, and is large. I took out (erased) the solid hatches that indicate the concrete, to make the site a little smaller. Since I do not use the entire site plan on the recipient Floor Plan Sheet, I clipped it using XClip, so only the necessary areas and parking around the building are shown.
I notice that the recipient drawings are very slow (i.e., the Floor Plan where I am working), and the Layers Properties Manager is the worst offender, being very slow and erratic when I want to add a new layer, change layer name, etc.
The computer is a new very large computer, and I did not have this slowness problem before working with other prjects.
Is there any setting or some settings that will make the drawings faster?
I am using Layer States Manager in CAD2010 and have run into this problem.
I inserted an XREF into my drawing which is using LMAN. I put the XREF on a layer that is visible for the current layer state I am in. Saved the drawing then another coworker opened it and the xref was no longer visible. Even though the layer settings show as not frozen or locked the XREF won't show. If I move it onto a layer that is showing in the layer state manager it still doesn't show. I'm not sure if this is just a glitch or if I have some some setting set incorrectly.
Also are others have problems with LMAN not working after drawings are opened by someone else in the office? Are the LMAN settings not universal?
Using CAD2011, froze, I restarted it and reopened the file I was working in. In my ribbon, all layers read "0", but show the correct ByLayer color according to what layers they were on before the crash. If I list something, it shows the correct layer, and not that it's on "0". When my coworker opens the same file everything is as it should be, which leads me to believe some setting got messed up during this crash.
It is making work way more difficult than it should be - I can't see what layers are what!
When I open layer manager, it doesnt show my layers, it is just all blank, not even a "0" layer. I can click in the area and it shows the layer but that is it. I searched for a fix but was unable to find a fix. I have updated my graphics card driver but that didnt fix it. I have attached a screen shot to show what it looks like. I am running C3D 2009.
View 9 Replies View RelatedLayers are shown in the drop down menu from the ribbon but when I open the layer manager no layers are visible. I can click in the empty space and the layer will highlight. See attached.
System:
Core2 Quad Q9650
8GB Ram
WIN 7 64bit
FirePro V3900
AutoCAD 2012 64bit
When I try to add new layers the layer propert manager is notvisable. I have to hit escape to return to the drawing. I beliesve the dialog box may be trying to go to a second screen I use at home. This happens on my lap top when it is not connected to my second moniter..
View 6 Replies View RelatedI am missing the icons for the "ON/OFF", "FREEZE", and "LOCK" in the Layer Properties Manager in AutoCAD 2010. Recently upgraded computer to 64-bit and had to re-install 2010. Since then, it takes forever to reload the Properties Manager. Adding new layers, trying to turn layers on/off, freeze layers, etc. causes the Manager to reload. The file I am working with is only 75 kb, tiny in comparison to files I usually work with. My co-worker has a 64-bit and 2010 as well, and her Properties Manager is working just fine. Do I have to reload 2010?
View 6 Replies View RelatedCan you import layers from a file other than the AutoCAD types, e.g. .dwg, .dwt etc? I have made a list of layers in Excel that I would like to import into AutoCAD without having to manually create each layer at a time (there are approx 150 layers).
View 2 Replies View RelatedI have a problem with exporting layers from dwg to pdf. Problem is that i can export (or print) drawing but i missing some layers in layer manager in pdf. I have drawing with 150 layers (from other co-workers) but only mine 4 layers doesn't appear. I have check in ACAD in layer prop manager if they are plottable but this is not a problem for content from those 4 layers are exported in pdf but not in layers they have to be (those layers are missing)!
I use ACAD 2012
edit: i found out that layers doesn't appear because contetnt on them are only blocks. for eg. block is on layer 1 but contetnt of block is on layer 2 so i see only layer 2 in pdf but not layer 1
I just updated my CorelDraw for X6 to X6.2 and now my object manager will not display the detailed information about the curves. It use to show the fill color, "CMYK, 0,88,77,50" outline fill color CMYK 0,0,0,100"
Now it just shows the curved symbol. Would like to get this back.
Do the people that develop (anti-endusers ) the upgrades ever think like an end user? Having the Layer Properties Manager set up with default filters that show "ALL" layers or "Xref" layers without a default for "Layers Local ONLY" is so counterintuitive and non-user friendly! This is just another example of how Autodesk has absolutely no regard for the end user.
View 2 Replies View Related" unreconciled new layers new layers were found that may need to be reconciled. view unreconciled new layers in layer properties manager
View 9 Replies View RelatedWorking in AutoCAD 2013LT-my Layer Properties Manager has stopped allowing me access. When I open a drawing layers all come however I get a pop-up note that says: "ALL LAYERS ARE ALREADY INCLUDED IN THIS LAYER STATE. NO LAYERS CAN BE ADDED"
What happened-even when I try to edit layers they will not show up in the Properties Manager as changed.
In model space if i go to layers manager and turn off a layer why does it still show up in model space. Civil 3d 2013
View 4 Replies View RelatedI have this pan open I left side of my AutoCAD 2010. How can I close it?
I don't see any cross on top of the pan to close it.