I am attempting to attach a title block into a layout. This is my process:
1. Go to Building1 drawing, and go to layout. Without any viewports created, I attach a dwg file named titleblock1.
2. When I specifiy the location and scale, I cannot find the attached drawing.
why can't I attach files larger than 1.5 KB? I can't attach anything useful!
I am trying to attach the client details as an xref to my title block. This is how it was done at my previous company, but I did not set that up, so I don't know how it was done.
The problem is this - when I attach the xref, I cannot see it on my page in paper space. If I zoom out as far as possible, the paper layout becomes a tiny dot on the screen. When I then draw a rectangle far to the right of the paper, I see a blue glyph on my paper, so I know that the drawing is there, but I cannot see it (the drawing is inserting very far to the right).
I would like to figure out how to insert my xref so that it shows up on my page. I have moved the information in the file to 0,0 and inserted at 0,0, but I keep having the same problem.
Working in Autocad 2010, needed to insert my title block into my design, I know how to insert, but I can't get design to work in the middle of title block.
View 3 Replies View RelatedIs it possible to create a 'drawing scale' defined attribute inside my title block when brought into paper space? I tried setting it up using 'plotscale' fieldname with various formats and it keeps coming in as 1" = 1' or 1:1 rather than 1" = 20' because that's what my plot scale is inside paper space but my drawing scale is 20 scale. If I bring the title block in model space, it adjusts, but I don't plot from model space. Surely there's a way to make this automated inside paper space.
Also, I just setup a 'Date' attribute inside my title block today. What's the difference between Date, Saved Date and Plot Date? Will 'Date' update if its in a drawing and opened up a month from now and saved or do i need to take 'Date' out and replace with 'Saved Date' or Plot Date'?.
I have some code to replace the current title block with a title block from a template file. I just don't like how it adds a new title block definition named "copy of titleblock". I'd like to delete or replace the current title block definition so only the newly added one is listed.
Sub test() Dim odrawdoc As DrawingDocument Set odrawdoc = ThisApplication.ActiveDocument If (odrawdoc.DocumentType <> kDrawingDocumentObject) Then Exit Sub Dim oTemplate As DrawingDocument Dim oSourceTitleBlockDef As TitleBlockDefinition Dim oNewTitleBlockDef As TitleBlockDefinition Dim oSheet As Sheet Set oTemplate = ThisApplication.Documents.Open(ThisApplication.FileOptions.TemplatesPath & "template.idw", False) Set oSourceTitleBlockDef = oTemplate.ActiveSheet.TitleBlock.Definition Set oNewTitleBlockDef = oSourceTitleBlockDef.CopyTo(odrawdoc) ' Iterate through the sheets. For Each oSheet In odrawdoc.Sheets oSheet.Activate oSheet.TitleBlock.Delete Call oSheet.AddTitleBlock(oNewTitleBlockDef) Next oTemplate.CloseEnd Sub
I'm just being picky at this point, but I don't want a buildup of title block definitions. We reuse drawings all the time which is why a simple method of updating a title block would be nice. I can just imagine in some years time after a title block update or two there are 20 "copy of copy of copy of .................. titleblock" listed in a drawing file.
I have a title block inside my drawing and i want to link my title on the title of the file itself, so that if the title of the file was change, it will be change also inside the drawing.
View 4 Replies View RelatedWe have a title block and border which is used in MS. If this is referenced using AMTITLE then it acts as expected. We issue these to some external people to create our drawings but they have been using CTRL-C and V to place them in a new drawing. ACAD does now not see them as a Title block or border but as blocks. We have a process to bring DWG's into SAP and this will check for a title block and border.
The issue is we need to fix these drawings and currently this means removing the borders and title blocks and placing new ones then adding all the attributes again. Is there a way to convert the blocks back to how they should be?
AutoCADM 2011 SP2
XP 32-Bit SP3
Is there a way to permanently attach a raster to a .dwg? I want to publish a large set of drawings on our Intranet and some have rasters attached.
I don't need to worry about links to references and how to post them so as not to break the link.
I have tried to change the size of the text in the title block and in other places within a drawing, but the changes are ignored. They always come back to Tahoma 0.120"
Is this a bug in the program?
Inventor 2013 with the latest service packs, etc.
I really need to make some changes to the title block and making the text smaller is one of them.
I created a standard title block template drawing for my student classwork exercises, and when I constructed the title block I keyed in real dimensions to ensure the title block would completely print on a piece of 8.5 X 11 paper. Now whenever I attempt to draw a large scale drawing (say a 36" dia circle, it draws the circle well outside my title block. I know why this is happening, I just need some tips about how to allow a title block template to be constructed around my current drawing reguardless of the drawing scale.
View 5 Replies View RelatedIs there an add in or something for faster type in the title block in a drawing? Name, title etc?
Right now the author and date are automatically but when i save the file to for example to "D1234 hammer" it becomes the part number.
I have to edit the title.
I want to save the file to "D1234 hammer" and the partnumber to be "D1234" and title "hammer".
IS there a add-in that I type the title and name and its auto fill the title block? Or do I have to create a custom title block so the drawing can understand to only to take the numbers from <part name> and the letters becomes <title>?
How do I insert a title block into my drawing?
View 9 Replies View RelatedWe are going to be making a new title block and I have been looking at ways to get the new title block into the old drawings. It looks like the Inventor Drawing and Resource Wizard is the way to go.
The steps seem pretty straight forward and simple but I am not getting the correct results. For the source drawing I select my new title block and leave the boxes for borders, my new title block name, and sketched symbols checked. I then pick my drawing I want to get the new title block in. On the last step I can select Yes or No and get the same results. When I reopen Inventor and the drawing it still has the old title block in it.
I'm having trouble inserting my title block in a 3D drawing. I'm kind of new to 3D modelling but it's probably a small mistake i'm making.
I started with my view in SE Isometric, drawed something and then I copy/pasted my title block from another drawing, all in modelspace.
My drawing is 3D and my title block is 2D but in the wrong position.
i have a more then 10 folder with one common x-ref i want to attached that x-ref like title block in all folder drawing how i ll attached in easy way also i want multi printing folder how can i send print in one time all folder
View 6 Replies View RelatedI am trying put drawing numbers on my drawings. The drawing number is "019-02-00038-x" where "x" is the page number in the set of drawings. How do I set this up? Every time I try to change "x" it changes it for the entire set of drawings.
I'm working with Inventor 2014.
Is it possible to set the drawing Scale to the Title Block? Seems like it is missing parameter...
View 8 Replies View RelatedIs there any command to fit or re-size a title block to A drawing in the layout?
View 4 Replies View Relatedfind a template with a title block that i can insert my information. I already have my project completed on a 24x36 sheet and would just like to copy it over.
View 3 Replies View RelatedI created a drawing in model space about 75' x 75'. Then created a title block drawing in paper space. Now would like to mesh the two so I can plot the drawing with title block. When I insert the title block drawing it is so tiny it can't be seen. What am I doing wrong?
View 3 Replies View RelatedI need to extract data from AutoCad Drawing using C# or VB.Net.
I have a Title Block which is not inserted using attributes. It has some horizontal & vertical lines drawn to look like a table and text added between them. See the attchment.
I need to extract data from that and display in Ms-Excel or in a datagridview.
I know how to insert title block in a layout tab. i want the title block to be the same block in all the tabs i am using. if i have 10 tabs i would like each layout tab to have the same title block. i will also need properties to where i change the date on the cover sheet, all layout tabs will be changed at the same time.
this also needs to be 1 file and not a base file and xref.
i know this works because i am working in autocad where it is implemented. this was done by an individual before i started at this job.
Ok I was able to build a title of my needs but what I'm not able to do is when I insert it to a new drawing i can't put in new text to the title block like (title, scale, job no., date, approved, check, job and so on) but i'm able to put in add text to the templates on auto desk so how do i get my title block like that.
View 9 Replies View RelatedI was curious, when creating multi sheet drawings, how can I place different information in the title block on each drawing?
Example, 2 pages, Description on page 1 = PAGE 1 DESC, by default this same description will show up on all subsequent pages. How do I get page 2 description to be different?
Inventor 2014 PDS
Can I pre-fill some of text in my drawing’s title block under the “Field Text” –“Edit Property Fields” ? Because some of the files I will use the same text again and again, if I can save the pre-fill text title block in the template, it will save me lots of time.
View 6 Replies View RelatedI created and saved a title block as a .dwt file, with no problems. When I open my title block, I cannot get a 3D assembly drawing to show as a 3D drawing in the title block on the layout tab. If I transfer the title block to the model space, it rotates to the same usc as the assembly drawing?
View 6 Replies View Relatedadding an unused template drawing title block resource.
'UPDATE TITLE BLOCK SHEET 1ThisDrawing.ResourceFileName="X:TemplatesStart Drawing.idw"
ThisDrawing.KeepExtraResources=False
DimoDrawingDocAsDocument=ThisApplication.ActiveDocument
'If iProperties.Value("Custom", "V1Scale") = NullString
oDrawingDoc.ActiveSheet.TitleBlock.Delete
[code]....
I want to add new properties so I can have new, custom rows when I go to Fields text in a drawing environment?
I can see how you add Prompted Entry ans so. Cant add anything to basic properties.
I am about to recieve an order to provide drawings to a new client who has requested me to author an new blank drawing title block for the required drawings. The company does however have a Logo and other necessary details.
My question is: What format should the logo be in and how do I transfer this into the drawing title block, bearing in mind that I will most likely have to change the size to suite the various size drawings sheets, namely A0, A1, A2 etc?
I have attempted to search for this information on CT and having found the topic been denied request to open whatever. This is a copy of the notification receive when attempting to open a topic:
"Forbidden You don't have permission to access /forum/showthread.php on this server. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request."
What I need to know is, will the drawing sheets/titleblocks attributes etc, I have created to insert in AutoCAD work in Civils 3d or will i need to create separate ones.
View 4 Replies View RelatedI have 4 layouts all from the same drawing that I need desperately to print now. But for some reason only the border and Title block will print for me. What have I done to cause this? And how can I rectify it? I need to print these tonight
View 3 Replies View Related
