I am trying to attach the client details as an xref to my title block. This is how it was done at my previous company, but I did not set that up, so I don't know how it was done.
The problem is this - when I attach the xref, I cannot see it on my page in paper space. If I zoom out as far as possible, the paper layout becomes a tiny dot on the screen. When I then draw a rectangle far to the right of the paper, I see a blue glyph on my paper, so I know that the drawing is there, but I cannot see it (the drawing is inserting very far to the right).
I would like to figure out how to insert my xref so that it shows up on my page. I have moved the information in the file to 0,0 and inserted at 0,0, but I keep having the same problem.
i am trying to set up templates at a new job and i want to create templates with an xref for the title block so when we start a new drawing, we use the template, save to the project file and everything is there with our title block already xref'd. my problem is, the path on the xref'd title block stays the same and is still referencing the location of the file i used when creating the template. if possible, when i save the new drawing to the project foldeer i want the xref to also move to the project file and the path to the xref to change.
I need a routine that will duplicate the current sheet's Layout tab and content to the next tab, set it current, delete the titleblock (by name) on the new tab and reference in a differently named titleblock, 1:1, 0,0 onto the new Layout tab. I'll be running this in a batch script.
I know DXF files can be saved as DWGs then used as XREFs but that isn't the goal we want to achieve.
We are a big steel fabrication shop and we run a plasma machine that accepts DXF files. What we want to do is be able to draw our parts as a DXF ready for the plasma then XREF them into an overall drawing to assure all of our pieces line up. Each piece will be a separate DXF.
We want them to be XREFs so that if one needs to be manipulated it can be done on the spot without having to reattach a block. The more files you have to open and manipulate the more room for error.
The only way I can come up with is to draw all pieces as individual DWG files, then XREF each one into their own DXF file as well as XREFing them all into an overall file to check that they all line up.
I have a main drawing that I want to pull into another drawing as an XRef. When I try and attach the drawing as an attachment I get then message *Invalid* in the command line.
I have taken the drawings off the network and put them directly on my computer to make sure that it is not a network issue, but I still cannot attach the drawing.
I'm having an issue with Autocad LT 2010 where when I xref in my title block which has our company logo in color, the logo will only print in black and white. If i open just the title block and print it, it will then print in color. I only seem to have this problem when the title block is xref'd in. I downloaded the 2012 demo version of AutoCadLT and it prints just fine?This has just started happening when my computer was upgraded to Windows 7 64 bit.
The title blocks that we use have prompted entries in them and I would like to find a way using iLogic to copy the entries from one title block to another within the same drawing; i.e.. if the user decides to change from an A2 to A1 drawing.
I already have an iLogic rule which allows the user to change the active border, title block and sheet size based on a form selection but would like it to capture the prompted entries already entered and re-use them after the change.
I have a title block inside my drawing and i want to link my title on the title of the file itself, so that if the title of the file was change, it will be change also inside the drawing.
I am attaching a File as a xRef. At the time of Attachment, I select attach as attachment, and No Path in Path.
Now if I try to fetch detail of this file using MdiActiveDocument.Database and BlockTableRecord, I gets only file name not the path. However, In AutoCAD we can see the file path under "Found At". Can we read / fetch this using C#.
In case of Full Path or relative Path, I gets full path in btr.PathName
Here is my code and I am using AutoCAD 2013
Database db = acadApp.DocumentManager.MdiActiveDocument.Database; using (Transaction Trans = db.TransactionManager.StartTransaction()) { BlockTable BlkTbl = (BlockTable)Trans.GetObject(db.BlockTableId, OpenMode.ForRead,false,true); db.ResolveXrefs(false, false);
I have a more then 10 folder(Irrigation-Telephone-electrical- general layout-profile etc) and one x-ref folder i want to attached that x-ref with all folder files in that folder more then 10 files so how can i attached that x-ref with easy way if i attached one by one its time less so any easy way to attached x-ref in multiple folder.
We have a title block and border which is used in MS. If this is referenced using AMTITLE then it acts as expected. We issue these to some external people to create our drawings but they have been using CTRL-C and V to place them in a new drawing. ACAD does now not see them as a Title block or border but as blocks. We have a process to bring DWG's into SAP and this will check for a title block and border.
The issue is we need to fix these drawings and currently this means removing the borders and title blocks and placing new ones then adding all the attributes again. Is there a way to convert the blocks back to how they should be?
I have an existing title block a few text attributes, to which I wish to add a watermark. I have added it in the block editor as a normal attribute, with the same details as the other attributes that work, only a different tag name. It has a default value, "DRAFT" and is tagged "WMARK". It works fine in the Block Editor, and If I test the block I can edit it to display whatever I want, but if I save the block and open it from Autocad proper, the attribute is not in existence, either as a default value, or editable from block properties, attribute editor or title block editor, whereas all of the other attributes are there. I have used BattMan to verify the settings of the attribute, and the only difference is that the others all have "L" in the "Modes" column, but I think that means that their position is "locked" whereas my new attribute is justified "aligned" therefore cannot be "locked" (This is some assumption on my part, as the documentation on the "Modes" column is almost non-existent). I cannot afford to waste much more time on this issue, as the boss is breathing down my neck, but editing watermarks on every drawing after every revision is frustrating, when it could be an attribute that is editable from the title block editor.
Is it possible to create a block to insert on our title block that will populate itself with a list of drawings and names?
I know this is possible through the use of LISP and the Sheet Set Manager, but could this be done through a combination of attributes and fields (we want the same functionality in LT).
I'm editing a title block using the Block Editor. Unfortunatelly after closing the block editor the linse & Polylines reflect the changes apported in nodel space, but the text did not mouve?
I'm trying to chnage the text of the sheet number and total sheet number attributes for each layout in my drawing. I have code that adds and deletes the specified pages, now I need to edit the attributes to reflect the correct page and correct total amount of pages. Here is my code, based on my old VBA version.
I know there is a problem with the line:
For Each item In myBTR.ObjectId
I've used a number of websites and books, but I would really like to find something that teaches about block tables, block table references, block table IDs so I can get a better understanding of breaking stuff down to get the info I need.
Public Sub updatePageNumbers() Dim myDWG As Autodesk.AutoCAD.ApplicationServices.Document Dim myDB As Autodesk.AutoCAD.DatabaseServices.Database Dim myTransManForPageNumbers As Autodesk.AutoCAD.DatabaseServices.TransactionManager Dim myTransForPageNumbers As Transaction
I have a problem in which when i set up my title block templates, when i set them up and keep my template inside the dashed area the printed dwg is either cropped or too far inside so it has to be well outside at the top to print within 10 mm of the actual paper, attached is an image of how i have to do it to make it print within 10 mm of the edge of the paper print.
I'm trying to take my title blocks that I have setup in Civil 3D and would like to use them in ArcGIS in my layouts. A company I used to work with did have it setup but I was not part of the setup.
I have a A1 title block in model space that I like the look of. I'd like to duplicate this in A3 and A4.Is there a way that I can scale the A1 dimensions to A3 and A4 to avoid having to redraw them again with the appropriate dimensions?
i have a title block in the layout tab which i use for all new docs. when starting a new drawing i open my old one, delete the drawings and save it with a new name - this way i always have my title block how i want it in the Layout 1 tab. this has worked for me so far. but now I need to create an A3 print out.
i have created the picture that i need in modelspace but when i click in the viewport within the layout and select the scale that I have been asked to use, the pic becomes too big for the page.
when i go into page setup i can select a3 and preview this but it just shows my a4 page in the middle of an a3 page. so how to i make the titleblock and viewport bigger (to fit a3)?
I was able to draw A1, A3 and A4 title blocks in model space before giving each of these title block drawings a layout paperspace tab at the correct paper size.
I wanted to be able to start new drawings with the title blocks and paper sizes already done.
But what happens when the beginning of a new drawing project is with a drawing that someone else has already done? I am starting a new project and I would like to focus in one one room in a large building. This means that I plan to end up with a 1:50 drawing of a room on my pre-set A3 sheet and title block.
Do I import this person's drawing into my drawing of the three title blocks in model space with the three paperspace tabs or do I import the title blocks into the other person's floor plans?
How to add a new sheet with my title block. I am a little confused on this so far. I have read the autodesk 5 parts to sheet set manger and there is allot of things I'm not sure of. The title block is the first
We are having some issues with title block scaling when importing them from the design center. Some people have this problem whilst others have had no problem at all or only in the past and this has since stopped.
Layout Template.jpg
The image above shows an example of the problem. The Layout basically appears 25.4 times larger than the paper itself (the paper is at the bottom left). This would indicate something is wrong with the insertion scale.
The drawing containing the title blocks is in millimeters and the drawings which it is being inserted to are in a mixture of millimeters, inches, or unitless. I have checked the insertion scale settings within options and both Source and Target units are set to millimeters for users that have this problem and users that don't.
I know a quick fix is to just select that block and scale it by 0.03937 (1/25.4).
Attached is the start of a title block, which I hacked up from a title block I found on this forum.
If you use dd edit to change the text you can only ever type one line of text, the return key does not move you to the next line. How do I change this so I can type in columns.
I have a drawing template that I frequently use and am trying to get the title block appear in every layout. Is this possible? It is only displayed on my first layout.
