AutoCAD 2013 :: Attaching DXF As XREF?
Sep 27, 2012
I know DXF files can be saved as DWGs then used as XREFs but that isn't the goal we want to achieve.
We are a big steel fabrication shop and we run a plasma machine that accepts DXF files. What we want to do is be able to draw our parts as a DXF ready for the plasma then XREF them into an overall drawing to assure all of our pieces line up. Each piece will be a separate DXF.
We want them to be XREFs so that if one needs to be manipulated it can be done on the spot without having to reattach a block. The more files you have to open and manipulate the more room for error.
The only way I can come up with is to draw all pieces as individual DWG files, then XREF each one into their own DXF file as well as XREFing them all into an overall file to check that they all line up.
View 1 Replies
ADVERTISEMENT
Jun 20, 2012
I have a main drawing that I want to pull into another drawing as an XRef. When I try and attach the drawing as an attachment I get then message *Invalid* in the command line.
I have taken the drawings off the network and put them directly on my computer to make sure that it is not a network issue, but I still cannot attach the drawing.
View 1 Replies
View Related
Jul 13, 2012
I am trying to attach the client details as an xref to my title block. This is how it was done at my previous company, but I did not set that up, so I don't know how it was done.
The problem is this - when I attach the xref, I cannot see it on my page in paper space. If I zoom out as far as possible, the paper layout becomes a tiny dot on the screen. When I then draw a rectangle far to the right of the paper, I see a blue glyph on my paper, so I know that the drawing is there, but I cannot see it (the drawing is inserting very far to the right).
I would like to figure out how to insert my xref so that it shows up on my page. I have moved the information in the file to 0,0 and inserted at 0,0, but I keep having the same problem.
View 4 Replies
View Related
Mar 1, 2013
I am attaching a File as a xRef. At the time of Attachment, I select attach as attachment, and No Path in Path.
Now if I try to fetch detail of this file using MdiActiveDocument.Database and BlockTableRecord, I gets only file name not the path. However, In AutoCAD we can see the file path under "Found At". Can we read / fetch this using C#.
In case of Full Path or relative Path, I gets full path in btr.PathName
Here is my code and I am using AutoCAD 2013
Database db = acadApp.DocumentManager.MdiActiveDocument.Database;
using (Transaction Trans = db.TransactionManager.StartTransaction()) {
BlockTable BlkTbl = (BlockTable)Trans.GetObject(db.BlockTableId, OpenMode.ForRead,false,true);
db.ResolveXrefs(false, false);
[Code] ...........
View 1 Replies
View Related
Apr 17, 2012
I have a more then 10 folder(Irrigation-Telephone-electrical- general layout-profile etc) and one x-ref folder i want to attached that x-ref with all folder files in that folder more then 10 files so how can i attached that x-ref with easy way if i attached one by one its time less so any easy way to attached x-ref in multiple folder.
View 0 Replies
View Related
Mar 14, 2013
I am sure this is a setvar that has somehow gotten switched on, but when I copy entities to a point on a line or object, it seems to bind or attach itself to that line/object. So when I try & move or stretch the entity, the line or object that I used as a ref point also moves.
View 1 Replies
View Related
Feb 14, 2013
We are moving from 2006 AutoCAD Map to 2013 Map 3D. When I do an overlay of files in 2013 Map 3D which was (X-REF) in 2006 the files don’t align, some do some don’t. I didn’t have that problem in 2006 or any other software. I have tried adding a coordinate system to the file to see if it mattered but it didnt unless I'm doing it wrong. I have just started working with 2013 Map 3D,
View 3 Replies
View Related
Nov 15, 2013
I am having trouble when I import XRef’s and the scaling of lines. When the drawings are importing the hidden lines do not show up as hidden lines. I know this might be a scaling issue but I do not know how to correct this. The XRef drawing is drawn at a scale of 1-1/2”=1’-0” and set to print on a letter size paper but the drawing which it is imported to is set to be printed on a 11x17 but the viewport is still at the 1-1/2” scale and the lines are shown as continuous.
View 6 Replies
View Related
Oct 30, 2013
I have a drawing that I cannot detach the Xref. It's not making sense.
When I try to detach the Xref I get a message saying
"Xref xxxxx.dwg has multiple references. Not detached"
I've attached a screenshot of what I'm seeing.
View 2 Replies
View Related
May 9, 2012
AutoCAD 2013 Windows XP
I have a drawing (Drawing A) that contains a PDF (using PDF attach) with text over the PDF. I then have this drawing Xref'd (as overlay and as attachment) into another drawing (Drawing B). When I print this drawing (Drawing B). The text prints but the pdf does not.
In Drawing A the pdf is on the 0 layer.
In Drawing B the pdf is on 0 layer.
The 0 layer is not frozen and is set to print.
The xref in drawing B is set to overlay and relative (I tried absolute).
I can see the pdf in drawing B.
PDFrame is set to 2 in dwg A and B.
View 4 Replies
View Related
Jan 29, 2013
I need to load 11 xref in my project but seems like in autocad 2013 more than 10 xref is not allowed, it keeps on rejecting the 11th reference without prompting any error.
I have tried to save the drawings in lower version and do the same procedure and it works, i therefore conclude that the issue is with 2013 version.
saving in lower version everytime we receive new xref is really time consuming and painful for hundred of drawings.
View 1 Replies
View Related
May 24, 2013
So we have a frustrating porblem.
When we have a clipped XREF the boundaries are selectable as well as the insertion point.
We want to be able to lock the xref inplace and make it not selectable?
View 4 Replies
View Related
Dec 7, 2012
I have made a plug-In for AutoCAD 2013 which reads the x-Ref from a DWG File.
However, I wants to read this xRef Details (with parent child tree information), from an Console or Windows Based Application. i.e. without loading DWG in AutoCAD, Is it possible to directly read the xRef details?
View 1 Replies
View Related
Nov 8, 2013
Points began showing up in my xref'd file. When I click them, they select the xref, so they are objects and not artifacts. I can XLIST the points in the xref and turn on/off those layers but in the base file, these points do not exist anywhere.
This is the only article I could find on the mystery dots: [URL]
I tried the solution to COPYBASE, delete all, and purge, but they persist. It is happening on at least two layers.
View 4 Replies
View Related
May 29, 2012
I have a Mechanical drawing with numerous Xrefs. I need to make changes to the Plumbing layers which is in O-Xref layer. I have tried to bind all Xrefs but cannot bind all of them. The piping is in the O-Xref layer. I cannot explode nor can I Xref-Edit anything in this layer. This is one of a number of drawings but this is the first one that I cannot explode or edit the layer and I have never run into this problem before.
Is there a way that the file can be locked up to prevent editing?
View 1 Replies
View Related
Sep 5, 2013
I can use xrefs on different project but right now on autocaddLT 2014 it doesn't work.
View 9 Replies
View Related
Nov 7, 2013
Updating the attached dwg (Xref),The file Q1 is attached to the file Q5 (attached). Edits are applied to the Q1. These edits are not transferred to the Q5 despite the fact that the “regenerate” button is pressed.
What might be the issue here? How the edits on the Xref files are reflected directly to where they are attached?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 6 Replies
View Related
Apr 29, 2013
When I import a drawing using XREF command from one file to the new file the scaling between model space becomes all messed up. making the adjustments between the two?
View 7 Replies
View Related
Apr 14, 2013
My Xref attachments are not visible. Do you know what can be the reason?
View 3 Replies
View Related
Mar 7, 2013
How can I create a layer on my xref so it doesn't affect othere sheets referencing my drawing without having to open a couple of hundred draiwngs. I know I can create my layer, freeze it, save my drawing, open all sheets referencing my xref and save them. Better yet, is there a setting I can use that makes my new layer pop up frozen on for all sheets while I work on my xref, on a newly created layer?
View 4 Replies
View Related
Apr 26, 2013
When you XREF a drawing from another file that file is brought in along with all of its layers. Personally I do not need these layers for my access is there anyway I can combine all these to eliminate the large quantity of layers in my file? Say by layer merging. And if I do will this affect the ability of the file to revise itself?
Explanation: What I am doing is taking a bunch of engineering drawings, XREF them into my file, then creating seperate viewports for each drawing referenced in. But the key is I need these files to adjust automatically when the engineers make changes (This is done through the XREF command from what I gathered from one of my previous posts).
View 8 Replies
View Related
Feb 5, 2013
I have an drawing that is loaded with attributed blocks. Nothing but text. When I XREF this into another drawing, none of the text shows. Layers are on, nothing is set to invisible.
I think this drawing is from an older version of AutoCAD, would that be the problem?
View 9 Replies
View Related
Jan 3, 2013
so in one drawing, the annotative scales of the objects are listed as 1" = 30' etc, and in the drawing i have them xref'ed into are 1:30. the only way i can get the annotative txt to show up is to make them non-annotative.
im assuming it has to do with the difference of 1:30 and 1" = 30'.
View 3 Replies
View Related
Mar 19, 2013
xref fade control not working?In model space I have xref'd a dwg (probably 2010 format) and it positions correct and displays in the normal default faded mode. No matter where I have the slider in display options, the xref fade does not change. Even changing the system variable through the command line is ineffective.
I'm running AutoCAD 2013 with Service Pack 1.1. installed.
View 4 Replies
View Related
May 1, 2013
I work with bridges and get xrefs from our road designers containing hundreds of layers. I'd like to point at an object in these xrefs and get the layer name. Is there a simple way to do this? The way the LAYFRZ-command works, freezing a single layer, I figure ACAD should be able to just return the layer name instead. Does this functionality exist?
View 2 Replies
View Related
Jan 1, 2014
I'm new to AutoCad 360 but I'm finding it impossible to find link to Xrefs on the 360 drive - I'm logged in and can see the files in Windows explorer but can't link them into the file... It means I have to work from different locations which is a nightmare for co-ordination.
View 4 Replies
View Related
Oct 17, 2012
When I open a file in ACAD2013/ACAD2013LT I can't see some XREFs created in ACAD2012LT. XREF command cannot resove it either. It will show path correctly.
View 7 Replies
View Related
Apr 10, 2012
As I recall, in previous versions of AutoCAD, when I am in the Layer Properties Manager and I click on an xref under the Xref heading, the only layers shown were the ones in that xref, not all.
That is what is happening now. I cannot seem to find any setting under the settings for the Layer Properties Manager that would change this.
View 3 Replies
View Related
Jun 7, 2013
How not to carry some layers when i xref a file into another.
for example,
i have a base file with x-1,x-2,x-3 layers. when i xref the base file into a main file, i only want x-1 & x-3 layer to show up in the main file.
is there any way to control what layers can be see in xref with out using freeze/off commands.
View 8 Replies
View Related
Dec 4, 2013
have xrefs in drawing froze some of the xref layers, changed colors on some others looks great on screen, but all the original colors show on plot, along with the frozen layers...is this to do with the xref?
View 2 Replies
View Related
Sep 18, 2013
I made an autocad file. with many xref files. there are layers. and the layers are all the same, only the name for the layer its the name of the xref link . but how can i turn it off at once.
View 9 Replies
View Related
