I just updated my CorelDraw for X6 to X6.2 and now my object manager will not display the detailed information about the curves. It use to show the fill color, "CMYK, 0,88,77,50" outline fill color CMYK 0,0,0,100"
Now it just shows the curved symbol. Would like to get this back.
In the object manager docker, is there some way to turn off the information that appears when you hover the cursor over an item? I found that turning off tooltips does not affect it.
View 2 Replies View RelatedOccassionally the object properties in my object manager will dissappear and I am unable to bring them back. I have tried toggling all the buttons on the manager, restarting corel, resetting corel to it's default settings and restarting my computer but nothing will bring back the properties. It does not happen on every single file but it happens often enough to be a pain. I have attached a picture of what the object manager looks like.
View 6 Replies View RelatedThere is problem with my CorelDRAW X6.
After I import different files in my working file, it's getting hard to work- RAM(16GB) is getting completely full and its almost unworkable!
I checked out Object Manager and found stack with "SVG data" and "Locked SVG data" object there under some basic shapes.
Stack is about from 10000 to 100000... Some times even more, but its not possible to select all them because Corel just stops. What is that- "SVG data" and "Locked SVG data" object and why they are so many there?
Question: How can I get the objects to appear in the Object Manager?
I have the CorelDraw 6X suite. The objects in the Object Manager window are not showing up. It's supposed to have curves, images, and text there. Instead, it has got just the following:
Master Guides (all pages)
Desktop
Guides
Layer 1
Document Grid
I have been using CorelDraw since about 1999. My first CorelDraw program was CorelDraw 9. Then about six or eight months ago I purchased CorelDraw 6X
This is the first time anything like this has ever happened.
My object manager is missing. It is available if I select the Adobe Illustrator option but not when I select Corel. How to get it back.
View 1 Replies View RelatedI must have pressed something, the details of the object in the object manager docker is not showing up, i always used it when selecting objects instead of selecting it from the document itself, how do i bring it back?
View 9 Replies View RelatedThis issue is difficult to describe on paper. When I'm working in the OM when I edit an object on a layer, the screen flashes.. The screen pauses, blips a flash of light, the bottom layer briefly appears and then goes back to the layer I'm working on. I'm using Draw X3 and there are over 20 layers.
View 4 Replies View RelatedJust as of today, as I begin adding objects &/or text to a graphic, absolutely nothing is 'showing up' in the Object Manager under Layer 1. It seems like always in the past, whenever I added a shape or text or curve or anything, a new line would be added under whatever Layer I was working in, detailing the object's properties.
Is there some simple config-setting that I tripped without knowing it?
I'd like to delete a layer but the layer cannot be deleted from the object manager as the delete menu item is disabled for that layer.
View 1 Replies View RelatedCDR X5.
My list of objects in the Object Manager docker have disappeared and I can't see how to get them back. With the layer manager view I can see the layers but no way can I display the objects (which I normally use a lot).
I have the object manager pane visible at the right of my screen. It shows the layers and status of those layers in my drawing. It has the + icon that allows each layer to be expanded to show every line in that layer. The trouble I am having is that each an every time I do something in the drawing to a line it prompts the Object Manager list to expand to the full list of lines. Clicking the - icon closes this down to just the layer name.
Thing is, how do I stop it expanding the the list to the line level of detail in the first place. I rarely need that level of detail and waste lots of time closing the view down.
We are using CorelDRAW 15.2.686.0 on our fleet and are noticing that Object Manager has some weird behaviour when you add objects to a page after you copy/paste an object onto a page.
Below shows me adding some rectangles to a page and object manager showing them:
Then when I copy paste an image into the document this object and any subsequent objects are not shown in the Object Manager:
As you see I have more objects than are shown in the Object Manager!
If I go to the Window Menu, then Dockers, then untick the Object Manager box, then once again go back and tick it, then all the objects on my page now show in Object Manager!
I am trying to edit the Master Page in Corel Draw X4. However I can't find how to list it in the obect manager. The first image shows the Object Manager as I see it.
The second image shows an example of the Object Manager as people have posted in other discussion topics.
How do I list all pages within the Object Manager as shown in this second example, and have the + and - buttons to expand the selection ?
Any macro that will close the Object Manager Docker then re open it again? Due to the bug with it, the objects in it disappear, or the icons for visible and print stop toggling, so I have to close it and reopen it. Tried recording one, but the recorder ignored my closing and opening. Just thought it would be handy, for when it locks up like that to press one button, rather multiple buttons and menus.
View 7 Replies View RelatedMy object manager all of a sudden decided to not show the objects on the layers. If I click the "eye" on the layer it will show or hide, but the names of the objects on the layers are not listed under the layer name.
If I right click on the layer, it has the check beside visible, printable, and editable. I have Corel Draw Graphics Suite X4.
my info pallet is showing CMKY as % but my Curves Dialog is showing values out of 255 - how to i change it so that both show the same values?
View 3 Replies View Relatedwhen I select several objects and try to deselect some of them in the object manager the list scrolls down after each click. This happens only in long lists when I deselect objects that are rather in top of the list. It then scrolls until the end of the list and I have to scroll up again for deselecting any further object. Can this be fixed?
Furthermore I would like to know if there is any way to select/deselect by a filter? For example: Deselect all objects that are of the type text or all curves that have a border.
is it possible to display dimensions when you select the object (Appeared inside the object ).
As because i have to look for the property bar again and again for the dimensions since my eyes are soring as it appears in very less size. If it appears the inside the object with appealing big size, then it could be easier for the user to note the size instantly despite of observing the property bar.
Is it possible to disable Photoshop CS6's "On-Canvas Info Display," the "small information pop-ups [that] are displayed near the cursor when using a variety of tools"? (circled in red below). I know it's a cool thing but it sometimes gets in the way. I'm running PS CS6 extended on 64 Bit Windows 7.
View 3 Replies View RelatedIn lr4.1 before Importing images, I'd like to see more info (camera, lens, focal length, f-stop, exposure time etc.) about the images besides just the file name before making the selection to import.
In the library module I just push the i key and it loops through two sets of info and a non-display. Why can't I do this in the Import module? If yes: how? What options do I set and where? If no: Is there a plugin to do so or who do I ask to add this to the next release?
I'm playing with the edge commons and json possibilities.
I have a movie with dynamic infos coming from a json file. Everything displays succesfully right now. I would like when I clic on a element (on the thumb picture) that the current info (so I suppose I have to pass an ID somewhere) displays in a movieclip I created (this movieclip is called "detail" in my edge scene).
I currently have a spotlight in my example when clicking on the thumb but I would like to remove it and just display the selected infos in the detail movieclip. I hope I'm clear enough..
I join my example file here. [URL]....
Using AutoCAD Map 3D 2010, I'd like to create a new legend for my map ("Tools > Create Legend").I'm trying to follow the steps shown on this video: URL....but there's no "Tools" option in my "Display Manager" tab.
View 1 Replies View RelatedI have many layers of data being FDO / SDF and Native Autocad Layers in the Display Manager which controls the DRAW ORDER. I also have 2-3 XREF's attached which when inserted create a separate layer in the Layer Properties. I am trying to separate these XREF layers from the Map base layer and have a new layer created in the DISPLAY MANAGER for each of the xref''s. I right click in the display manager and go DATA>ADD DRAWING DATA>DRAWING LAYER and select the Xref layers. They successfully get inserted into the DISPLAY MANAGER but when checking them on/off, it doesn't control its display. It appears they are still on the MAP BASE.
View 3 Replies View RelatedI have to add a style text in a display manager. When i add it, i have a option to scale this text. It is possible to have possibility to scale the text as a same height in multiple viewport in a layout... example (* 10 (VIEWPORTSCALE)) but this line does'n work
View 4 Replies View RelatedI'm working on a drawing where I've been turning on/off a layer for parcels so I can select a well (point coverage/theme) or the parcel to get well owner and property information. All of a sudden I can't select the layer anymore - the checkbox becomes unresponsive. C3D and not map for this...
C3D 2011
Intel Xeon E5630@2.53Ghz
NVIDA Quadro NVS420 Dual Monitor
12GB Ram / Win7 Professional 64bit SP1
I imported data from a SHP file to a base drawing I plan to use to attach, and I wanted to replace data points with data symbol definition blocks. However, when I create a symbol style and try to edit it by double-clicking, I get a *Cancel* on the command line and nothing happends. When I pressing the "Style" button on the Display Manager tab in the Task Pane, same thing.I suspect that I missed a step - or several - along the way of importing the SHP file.
View 2 Replies View RelatedWhen opening the layers dialogue box in AutoCAD 2013 the display does not appear to load correctly, I have had this problem before when executing this command and loaded up the old layer manager, I can't remember what the command is for load this.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I created a drawing with multiple layout tabs, so as to create different maps. My display manager consists of data connections & layers added from the Layer Properties Manager. When I activate a viewport from the layout, I want to freeze some of the Data Connection items (like shp files). How can I freeze these items within the active viewport only?
View 9 Replies View RelatedI want to attach a drawing as xref to another drawing, but with maps, to be specific, with drawing manager layers, entity styles and hatch styles. I've made different maps in the same drawing with different styles, so I can change them accordingly.
I'm running AutoCAD Civil3D 2011.
It happens when you turn on layer manager to adjust each layer settings such as name, line type or color and etc.
Problem is that each layer row disappears and each time it happens, only solution I know is to restart the computer. See the attached image.