AutoCAD Inventor :: Cannot Delete Hatch In A Drawing
Oct 30, 2013
I made a sketch attached to a drawing view, in it made a hatch. I closed the sketch and the file.
Opened again, after days, activated the sketch, selected the hatch, it turned red, pressed delete but it didn't disappear. Also on the right click there is no delete option.
When i select the hatch and it turns red, when i press delete or right click it turns green.
It is strange that when the sketch is closed and i select it in the browser i see the other lines of the sketch in red, but not the hatch.
View 3 Replies
ADVERTISEMENT
Nov 13, 2013
Using ISO.idw template I created into a sheet a Sketch which contains a hatch. Now I want to delete that hatch and I don't find anywhere how to delete it.
The second problem is this: I want to create in multiple sheets the same drawing but with small differences. How to copy a drawing from a sheet to another sheet. I press right click on the first sheet and i press Copy but there's no Paste button.
View 1 Replies
View Related
Apr 18, 2012
I hatched some area in sketched symbol. Now need to delete it, somehow cant.
View 6 Replies
View Related
Jul 15, 2013
How to access the color for a particular hatch within a drawing using iLogic.
I would like to color the hatching for parts based on paramaters besides material.
ie.
Purchased parts = Green Hatch
Refrence = Grey Hatch
I would hope one could loop through the views looking for hatches, and once found, check the part they are associated with, then based on an "if then, change the hatch color and move on to the next pattern.
View 4 Replies
View Related
Jan 16, 2012
I opened up a drawing which had a hatch over an area, and after deleting some text from within the hatch extents, found that the hatch didn't ignore the text & put the hatch behind it, rather, it created an island around the text to avoid a hatch/text clash.
I've removed a few pieces of such texts, and now have a bunch of rectangular holes in my hatch where the texts used to be. How can I remove these islands completely without having to re hatch the whole thing again?
(I realize I could simply minimize the size of the island by picking the four corners/vertices of the hatch and bringing them closer together, but this is a messy solution)
View 2 Replies
View Related
Dec 19, 2013
I am working in AutoCAD 2008 on a subdivision plan that has several sheet layouts. The roads in the subdivision are dimensioned and have a pavement hatch. In one of the layouts, however, we want to turn off the dimensions, but leave the hatching. When I freeze the dimensions in that viewport, the pavement hatch is left with holes wherever the dimension text had been.
Other threads had suggested going through Hatch Edit > Remove Boundary > Select all the "island" boundaries. When I select the hatch, though, no boundaries show up around the holes left by the dimension text.
Is there any way I can turn off dimensions in one layout without leaving holes in the hatch?
View 9 Replies
View Related
Nov 16, 2011
i have problem with hatch,if i delete any lines from related hatch protion object area, my all related hatch object erased.pls guide me how to solve problem.
View 6 Replies
View Related
Aug 25, 2009
I have several days of experience with Autocad 2010... The problem: I have many (a lot) polylines in my 2D drawing that are adjacent to each other, but not joined. What is a good way of joining them, so that those that "touch" each other become one? Maybe I can hatch the area, then delete polylines and then reconstruct the boundary?
View 9 Replies
View Related
Apr 16, 2012
when i draw any pattern in autocad , how i can define it as a hatch ??
View 2 Replies
View Related
Oct 9, 2012
I'm trying to use the hatch command on a drawing. Everything seems to work fine, but when I hit enter after having used the hatch command, selected pick points etc. nothing happens on the drawing. There are no error messages.
I can use hatch without problems on other drawings so I suspect it has something to do with the drawing or I've overlooked a setting or two.
View 9 Replies
View Related
Feb 20, 2013
Is there a way to select and remove all hatch from a drawing via macro? Bare in mind I'm on Acad LT so lisp no good for me. This includes associated hatch but need border lines to remain.
View 1 Replies
View Related
Jun 26, 2013
I have just made an Hatch ANSI32 on my drawing. This has a set of 2 lines each, but I would like to have 4 lines set.
View 6 Replies
View Related
Oct 17, 2012
Why does my hatch pattern look different on sample in the hatch window and on the actual drawing?
I attached a picture where the top part is what it should look like and the bottom part is how it looks like on my drawing.
View 3 Replies
View Related
Apr 10, 2013
I'm trying to use gravel hatch in my drawing, but not working. In other of drawings works perfect. Maybe the problem can be in this drawing.
View 9 Replies
View Related
Feb 22, 2012
Hatch is not showing up on my drawing anymore. I use hatch command, pick area, pattern, color, scale etc and then when I press enter or preview nothing happens. Hatch works on my layouts though but not in model view.
Before all that happened, AutoCAD crashed and stopped working so I had to force close it.
What do I do now? How can I make hatch work again?
I'm using AC 2010 mac version.
View 7 Replies
View Related
Dec 7, 2011
I opened a drawing that I had not opened in over a month originally created in AutCAD 2011, and now using 2012. It appears only some of the hatch patterns that I created are now duplicated, and in some cases up to 17 times! When I select the pattern it doesn't show that there are multiple hatches underneath, but when selected it shows in the properties box All(2) or more. One of my patterns was scaled down and rotated 90 degrees and because when I select it it's showing 10 entities selected I cannot scale it back or rotate it without deleting and re-hatching. The .dwg is pretty complex so doing this for every hatch that shows multiple would be very tedious.
View 4 Replies
View Related
Feb 6, 2012
When I save my autocad drawing with hatches as a PDF and open it in illustrator, it makes everything extremely slow, probably because the hatch is converted into separate lines in illustrator. What can I do to get around this?
I tried to open it as a dwg file as well, but it didn't work.
View 1 Replies
View Related
Jul 5, 2011
I am trying to convert a drawing to PDF but I keep losing the hatch in the conversion. Is this normal? Can the hatch be converted to PDF with the rest of the drawing?
View 3 Replies
View Related
Jun 7, 2012
I'm trying to hatch floor patterns in suits. I draw a pline aroudn perimeter. There are a couple of problems.
First, when I do a hatch by selecting the pline ("object"), it doesn't detect islands, such as our room tag. This is likely because the hatch is over an xref (the suite is an xref, room tag and pline are not), and hatches don't seem to like xrefs.
Next option is to hatch by "pick points". When I do that, and select a point on the floor of the suite, all of a sudden an old xref or xclip appears in 2 locations, and the hatch boundary takes the lines from that new xref into consideration. The crazy thing is that this xref does not exist in any form in the drawing. I have purged/audited the drawing, and the drawing no longer even exists in our computer.
View 4 Replies
View Related
Jan 12, 2012
Basically for example (to make this easy to understand) I've got 4 squares with hatches inside and im trying to select one single hatched area in one of the squares (and delete it). But upon selecting it it's selecting the hatches in the other 3 squares (as they were added at the same time). I've carried out a few searches in google etc and experimented with "pickstyle" but with no avail, also I've looked at groups but there are none in the drawing(so I can't ungroup).
I can do it (which I've just realised) by deselecting the boundaries in "edit hatch" but just wondered if there was a quicker way?
View 3 Replies
View Related
May 1, 2012
i can delete the drawing but not the name??
View 5 Replies
View Related
Jun 29, 2013
I am unable to fill objects with any sort of hatch in my current drawing. Other drawings are fine, but in this one, nothing will hatch, either form the tool palettes option or from the hatch menu.
View 7 Replies
View Related
Sep 13, 2011
Why cant you extrude a hatch? I am trying to draw soil in 3d and the materials in the 3d library aren't really working for me. I wanted to extrude gravel hatch from 2d material bank.
View 6 Replies
View Related
Oct 7, 2009
Quite often I recieve drawings with loads of hatches/solid fills in. For example a housing layout with all of the houses, trees, roads, grass etc hatched.
I generally want to delete these/turn them off and work with a line drawing.
Sometimes the hatches have been drawn on their own layer, so turning them off is simple. But sometimes they've been drawn on layers with other things I want to keep. Genereally there are loads of hatches, so deleting them one by one is frustratingly slow.
I used to use Microstation, and in that there was a tool to delete hatches or fills, and if you selected all items you could delete the lot in one go. Is there such a tool in AutoCAD?
View 9 Replies
View Related
Nov 13, 2013
Isn't there a way of taking an existing hatch patter off a drawing file and load it into your hatch library?
View 2 Replies
View Related
Dec 12, 2011
I have a feature line in my drawing. It is one of over 1000 breaklines in a surface. I want to delete it from the surface but keep it in the drawing. How do I do this?
In 2009 this was easy. I could erase the featue line then use the OOPS command to get it back in the drawing. Unlike the UNDO command, OOPS did not put it back in the surface definition. This was a wonderful feature/bug. In 2012 OOPS behaves the same as UNDO.
I found this post regarding finding a breakline in the surface definition but that is not realistic with 1000 breaklines.
Here are a few options I have tried:
Delete all breaklines from the surface and add the ones I want. (This is my best option so far.)Copy the featureline to the clipboard, erase it, then paste it back in. (Copying feature lines to the clipboard, or wblock, is very slow. The feature line should be moved back to the orignal site.)Explode the feature line into a 3D polyline and then convert back into a feature line. (Good option but does not work well for curves.)
Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600
View 9 Replies
View Related
Jan 10, 2013
I'm trying to clean up the drawing. I have erased everything, but there are still 20572 parcels somewhere in the drawing that I couldn't delete.
The file is too big to attach so use the link to download:
[URL].........
View 9 Replies
View Related
Dec 2, 2012
How to delete overlap entities in drawing?
Here i attached the dwg file.
View 3 Replies
View Related
Mar 22, 2012
how to delete shape file which comes from other drawing
View 1 Replies
View Related
May 19, 2012
how to draw a certain line and be able to delete part of it.
Example 1: I would like to draw a bunch of seried resistors, so I made a bunch of rectangles and draw a wire across them. But there are wire crossing through each one of them, how do I remove/erase that part in between each of the resistor? The line is made by using command: LINE
Example 2: Drawing some polygon and random shapes. Simplest example, drawing a half circle, so I draw a circle and want to remove the other half, how do I do it?
Yes, I know in example 1 I can do one object first then copy paste... But that is not what I am asking. I am seeking the command how to remove the lines or object in between.
View 3 Replies
View Related
Nov 26, 2012
how to delete all OLE objects from drawing by most efficient way.
There are abt 150 drawings, each has from 2 to 20 or so OLE objects which need to be deleted. OLE objects are on many paper spaces.
I tried to use qselect but it selects only what is in current space.
Would need some lisp or some other methode than all can be deleted (excluding those which resides in blocks).
Tried also yto use ssx and then erase but still it deletes only what is on current space.
Just as additional info, those OLE are all pictures, not xls files for example.
View 8 Replies
View Related
