Is there a comprehensive list of all the surfacing commands or possibly a full tutorial showing surfacing in inventor?
I would like to be able to compare the surfacing tools to other systems to make a purchasing decision, and not sure how to get a list or evaluate the surfacing functionality.
One of them is to e-mail drawings to our clients but my boss doesn't want to send them the blocks we drew so I have to do the following for every drawing.
1) Freeze the Multileader layer (the numbers disappear and turn into some text whenever I explode them so I have to freeze this layer.
2) Select All
3) Explode (I explode it 2-3 times)
4) Select everything on 2-3 Layers only and block those and disable "Allow Exploding".
5) Save.
I just came up with this...
LAYER
K-Numbering
F
SELECT
ALL
EXPLODE
SELECT
ALL
EXPLODE
PURGE
QSAVE
Ran it, didn't do anything, figured as much since I pretty much threw those commands in there.Anyway, which book or site would have a list of commands I could "pluck" and use in the text file?
I'm assuming an AutoCAD script is just a sequential list of commands like the above without all the ++ -- {} syntax? If so, it shouldn't be too hard right?
Is there a complete list of what all the "GPU features" in Photoshop 13 Standard are? I had posted this in another thread, but I'll just move my query to this new thread:
Chris Cox wrote:It will run, but none of the GPU features (including 3D) will work…
Is there a listing or description of what all those "GPU features" are? It would be of great interest to all of us who are stuck—temporarily or permanently—on such unsupported systems, regardless of platform.
This is on a maxed-out in every sense, unupgradeable MacBook on which ACR 7.1 hosted by Photoshop CS6 Standard is running just fine.
Is there a command in Inventor to add values in a column in the Part list ( BOM) and to display a total value bottom like the Grand Total in Revit?
View 2 Replies View RelatedAutoCad 2011. I am having no luck when trying to drag a command from the Command List pane to the Quick Access Toolbar. I have success draging to Tool Palettes
View 1 Replies View Relatedusing the list command used to pop up the grapscr text box, now it does not, is there a setting for that?
View 2 Replies View RelatedWhen entering a command with autocomplete on and the List option on, the list dropdown only displays two or three of the possible choices, because the list box opens below the command line, which is at the bottom of the screen. Unless I minimize acad and adjust the window to only fill part of the screen, I can't see the list. This is a shame, because it is a cool feature. Having a dialog box display off the screen? how to get this to either display on the screen? Here is a screen shot of how it looks at window max and window minimumized.
View 9 Replies View RelatedWhen we launch the Area comand the area value is hold in the system variable "area".
What is the system variable that holds the Length value of the selected entity?
I find conflict area between list command for hatch and calculation.
when do you make calculation list of plines 2381.399
when do you make calculation list of hatch 2545.948
How to automatically stick the coordinates obtained from the “list” command in a table?
I’m wondering if there is a way to automatically store the XYZ coordinates obtained from the “list” command in a table with three columns in the AutoCAD.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
if it is possible, what is the proper syntax for saving a list with the setcfg command?
View 5 Replies View RelatedI am having an issue with the sheet set manager's tool to insert sheet list table. I have a new sheet set for a new project that was created entirely in Autocad 2012. When I try to insert a new sheet list table, after I click OK in the Sheet list Table dialoge box, it simply closes to an empty command line with nothing inserted. Why nothing is inserted?
View 2 Replies View RelatedNeed a lisp that could dump the values of a list command in a text file placed in a folder C:user121list.txt.
View 9 Replies View RelatedI've found things like:
Dim odoc As Document
Dim ocompdef As ComponentDefinition
odoc = ThisApplication.ActiveDocument
ocompdef = odoc.ComponentDefinition
And
ActiveSheet.View("VIEW1").ScaleString
ActiveSheet.View("VIEW1").View.Suppressed
I'm wondering, is there a list available detailing the content of the Inventor 2013 API and a list for the iLogic properties of objects? Preferably with some sort of description what they do.
It seems like most people output the whole BOM. I only want to data in the Part Number column, preferably as a list of strings.
Here's what I have so far:
foreach (Sheet oSheet2 in aDoc.Sheets){ for (int i = 1; i < (oSheet2.PartsLists.Count+1); i++) { var oPartsList = oSheet2.PartsLists[i]; for(int k = 1; k < oPartsList.PartsListColumns.Count+1; k++) { if (oPartsList.PartsListColumns[k].Title.Equals("PART NUMBER")) { //what goes here??? } } }}
We have a general template (excel file) for material list. Is there way to connect this template with inventor. Or alternatively change the inventor BOM list to suite our template?
View 1 Replies View RelatedI've been using the "Phantom" BOM Structure to roll up duplicate .ipt's when I have more than one sub-assembly within a higher .iam and it has worked well.
Question - is it possible to adjust settings so that the .iam that I "Phantom" itself remains as a visable line item in the Parts List while still rolling up like .ipt's?
I have a drawing and I need to get a list of parts. I see *most* solutions use the parts list on the sheet itself. I will not have access to that. Is there a way to get a list of parts WITHOUT accessing oSheet.PartsList[1] ?
Win7 x64 - 16gb ram
i7 3610qm
FirePro M4000
Inventor 2013
ETO 6.1
I have some blocks (different exit signs) in a drawing. I want to make a table or excel sheet that sums up the number of equal blocks in the drawing. How can i make this?
I want to connect this tabel to excel 2010.
I use AutoCad LT 2012.
As an academic interest I was trying to convert Brian’s code for exporting Parts list with thumbnail to VB.net 2012. I just modified the below code to remove the vb6 support. I am using VS 2012 and Inventor 2014. The end result on the word report thumb nail for some parts are not visible. It goes to the error code and putting the text instead of thumb nail. At the same time Brian’s code as it is (used the exe file to install it) works fine on the same parts list with all thumb nail.
#Region "PictureToImageConverter"
Public NotInheritable Class PictureToImageConverter
Inherits System.Windows.Forms.AxHost
Private Sub New() MyBase.New(Nothing)
[Code] ......
Need vb.net code for filter part list base on view representation.
View 1 Replies View RelatedNecessary to convert list of material of the assembly (IAM) into archive pdf. (bill of Material)
View 3 Replies View RelatedWe would like to put barcodes in a parts list. To create a barcode we use a special barcode font.
It's impossible to have two types of fonts within one parts list, but is there an other way? Is there code (VBA) to generate a table with an extract of the bill of materials and a barcode generated
with a special font on the fly. We would basically need a parts list with an extra column for the barcode.
Autodesk Inventor Product Design Suite 2013 SP1.1
I need to use 2 part list in my drawings. I have made the second part list in the style editor and saved it but how do I select it?
View 1 Replies View Relatedis there any way to make all the rows in the BOM/parts list on an IDW the same height? I did a search on this and saw nothing new on this. the reason we need this is for a program we use after export to dwg. it is a program we use in autocad that is a txt copy lisp program to populate attributed customer title blocks.
win 7 64 bit sp1
cpu intel xeon E5-2687W0@3.106
eight core
two solid state hard drives
32 gig of ram
Autodesk product design
suite premuim 2014 64bit
Nvida quadro 4000
Space Pilot ver. 1.6.2 2010
slphantom (NNTP handle: scottl)
I am trying to create a form, so that my designers can pick their parameters when they first start a new part.
For this form I have created a multi-valued parameter for them to select from.
My issue is, why does Inventor not list fractions in the correct order.
What I would like to see:
1/8"
3/16"
1/4"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
What Inventor lists:
1"
1/2"
1/4"
11/16"
13/16"
15/16"
3/8"
3/16"
5/8"
5/16"
7/8"
7/16"
9/16"
Is there a way to get Inventor to list these parameters in order of value?
Is there a way to get a list of the currently open documents in VBA?
Right now to process a bunch of open drawings I simply process the active drawing and then close it, then repeat until all are closed. I'd like to be able to get a list of open documents and switch between them to process them all, which would leave them open.
I have just inherited a project where I have been asked to supply our purchaser with a list of non-stocked fixings.
OK so far, i hear you ponder, but the designer for reasons of speed (his words) didn't add the fixings to the assmbly!
Is there any way to list all tapped hole features to an excel spread sheet so that i could then just sort and count and then be able to hilite the specific parts in inventor to find the length?
The prospect of looking at each individual part for tapped holes fills me with dread (shudder).
HP z210 16Gb ATI FirePro5800
Autodesk Produst design Suite 2012
I wounder if there is a way to see which dimensions that have been changed when you update a drawing? (after changing the model)
View 5 Replies View RelatedHow to create area in to BOM List.Why Inventor 2013 can't do that?
View 9 Replies View RelatedDoes Inventor (2012) have the option to view sketch constraints as a list? I feel like I am playing pictionary trying to find out what constraint is what and what it is constraining and it doesn't work that Inventor stacks anything nearby on top of each other.
I've attached a file showing what the problem is, please don't judge the model tree. I was prototyping as I went so it is messy.