Photoshop :: Turn Square Into Triangle By Reducing Length Of Top Edge To Single Point?
Mar 28, 2012
For example, I have a 10cmx10cm grid with lines every 1cm. I want to turn this square into a triangle by reducing the length of the top edge to a single point. The final image should show the vertical lines reaching up towards the top centre, while still leaving the horizontal lines 1cm apart.
Using DISTORT will push the vertical lines up towards the top, producing uneven spaces between the lines. How do I avoid this? know it would be easy to recreate the desired triangular grid from scratch, but this is just an example of my problem. I need to apply the solution to graphics which cannot be reproduced again - i.e. bitmaps.
View 3 Replies
ADVERTISEMENT
Jun 26, 2012
AutoCAD LT 12 and 11
1. How can you input text within a circle or square or triangle? The circle , etc would be just larger then the text within.
2. How about with leader added pointing to location?
3. Can this be done using following Macro:
*^C^Ctext;_mc;;;$M=$(getvar,USERI1);setvar;USERI1;$(+,1,$(getvar,USERI1))
or inputted like underlined text :
%%uTEXT HERE
View 1 Replies
View Related
Feb 26, 2013
I have an image that is 912px long and 1px high..There is 1px of green at each end and the the rest is white.I need it to be 150px long 1px high in total.
2px of green (one at each end) and 148px of white in the middle.
View 3 Replies
View Related
Sep 3, 2013
I have 4 points/corners (with XYZ-coordinates) of a square shape created in the DWG of my AutoCAD Civil 3D 2013 program. I want to create 2 "triangle-shape" parcels (one parcel connects Points #1-#2-#3-#1 and the other parcel connects Points #1-#4-#3-#1. How can I create these 2 "triangle-shape" Parcels from the 4 points/corners of a squre shape?
View 9 Replies
View Related
Sep 19, 2013
How to make a triangle?? is it like indesign of illustrator...while deleting a anchor or something...and how?
View 1 Replies
View Related
Dec 12, 2013
I am trying to create a pattern that I have created in previous itterations of Illustrator. In CC when I create a triangle (either via Star, Poly, or Pen tool) and then try to rotate it via Transform Each > Transform again, the rotation point moves according to what the bounding box would be if I reset it, rather than staying in one (original) spot relative to the actual bounding box and triangle. I cannot find any settings that would be affecting the rotate point in this way. I am pretty confident that I am using the same procedure now that I did in older versions of Illustrator. Perhaps I am using the wrong procedure.
Naturally, if you are rotating something around its center you should expect that it would end up create a circular pattern. It is more of a square with concave sides. The red is a perfect circle that I grouped to the triangle to demonstrate the rotate points movement. It is located in the exact center according to the align tools.
View 4 Replies
View Related
Feb 10, 2012
I have a shape created by three hexagons and they are abutted along edges. I would like to combine them into a single object and in doing so reduce the lines so that the abutted lines become one line. the reason is that currently they are processed twice along each abutted line by my laser.
I can use combine but this still leaves them as discrete editable shapes in node editor, so clearly the double lines are still there.
If I use weld I lose the lines.
View 13 Replies
View Related
Aug 26, 2011
I'm wanting to use a diffuse colour to alter the iterations in the mesh smooth modifier. I'm using the wire parameters dialogue but am unsure of how to turn the 3 point value of the diffuse (rgb) into linear (1 point) data.
Work Computer - Max 2012, Core i7 3.6, 6GB RAM, ATI FireGL V7700 512MB, Windows 7 64bit
Home Computer -BBC Electron with tape player and a copy of creepy cave
View 2 Replies
View Related
Feb 27, 2012
When we launch the Area comand the area value is hold in the system variable "area".
What is the system variable that holds the Length value of the selected entity?
View 6 Replies
View Related
Jan 18, 2012
When I turn on shadow I just get a square under the part that I modeled. If I turn on ray tracing I get a detailed shadow but then I have to wait a minute or two every time i move the model. In the video tutorial it seems that the guy has a good shadow with no raytracing.
View 2 Replies
View Related
Apr 10, 2013
So when I create a triangle by using the star shape tool and only giving it three points. When I have my triangle, I duplicate it and make it smaller. I center them both up on the canvas, but they don't look centered. As you can see in the picture provided, the bottom has more of a width that the others. I've tried using the alignment tool and the smart guides. I do resize the triangle using shift so it doesn't mess up the shape too.
View 10 Replies
View Related
Feb 27, 2012
When we launch the list command, the Area system variable holds the area value of the selected shape.
How to get the length value into an Autolisp program to use it?
View 3 Replies
View Related
Sep 12, 2012
i have 3 known points, and i know they are 3 of the 4 corners of a square, how do i calculate the 4th? these points are on a skewed square, where the square has been rotated in the x axis and then rotated in the z axis. It must be simple geometry, but i cant see it.
View 4 Replies
View Related
Sep 10, 2013
I have installed recently the XDPx9 as an upgarde from V8. Now I am facing the folling issue:
Every time I will make blurred edges to a square, this square disappears completely. As long as it is not blurred there is no issue. Strange is, that this phenomena only happens to a square and not to any other shape. I tried several set-ups but all resulted in same issue. The pics attached. Means: Once a square has sharp edges, it is visible in the work-view as well as in the pre-view. Once it has blurred edges, it is still visible in the work-view but disappears in the pre-view. (Even in the browser view it has been disappeared)
View 9 Replies
View Related
Jul 17, 2013
When I try (by setting a line colour), transparency isn't taken into account.
View 8 Replies
View Related
Apr 26, 2013
I use flat piano hinges on doors for many of the machines we build. I would like to be able to calculate the total length of multiple doors on a single machine. We buy these hinges so it needs to go on a buy out parts list.
So here is my problem:
To make it a useable hinge I build an assembly from two hinge halves.
This allows me to check for interference within the machine when the door gets opened.
I set the BOM structure of the assembly to purchased so it shows up on my buy out list.
Both halves of the hinge are set to normal.
There are hinges of different lengths on the same machine.
I can link a parameter of one of the halves to the assembly to show length of the hinge but I cannot set the BOM base qty on the assembly to that parameter so Inventor can add up the lengths.
When I group the items in a buyout parts list the result is "0." The individual assemblies show the correct length because I use the "length" parameter that is linked for the QTY in the parts list. But I cant "add" the lengths and have a total whe I group them.
I need to have mixed units in this list. Some things are bought as Each and these hinges are bought in length.
View 1 Replies
View Related
May 22, 2013
I've migrated from Autocad 2005 to ACAD LT 2014. After using it for a couple of weeks I find the angle and length display on the line command more of a distraction. Can I turn this feature off?
View 3 Replies
View Related
May 31, 2006
I have a generic 5" thick rectangular concrete roof layout with a single directional slope of 1:3.
Is there a way to have the bottom and upper edge-faces be square (Two Cut - Square) to the slope and not vertical (Two Cut - Plumb) ?
No facia applied to this roofing system. Just plane jane.
View 6 Replies
View Related
Jan 17, 2013
I'm wondering if there is any way to chamfer a set length along an edge (similar to what can be done with flanges in sheet metal mode), as opposed to the entire length of an edge.
View 4 Replies
View Related
May 20, 2013
How can I turn text into a single line of dots, a la Stella McCartney's old logo?
Note: I tried creating outlines & using the dashed stroke setting but that only allows me to turn the outline/stroke of the letters into dots... I need to change the actual fill into dots.
View 11 Replies
View Related
Sep 9, 2012
I have a single layer which is a bunch of people with their hands in the air (on top of transparency).
I want to change every bit of the shape of those people.... to a single color (e.g., very, very light gray blue)
View 4 Replies
View Related
May 8, 2012
I don't understand why this Fillet would fail when it was fine before I changed the length of the edge. See before and after shots attached..
The geometry/features that are used to create the fillet are exactly the same.
View 1 Replies
View Related
Feb 27, 2014
I have an animation in Edge, and I'm trying to make a button that can play the timeline for a specified amount of time and then stop, without the aid of labels. So, I figured if i set the button to sym.getSymbol("mysymbol").play(500); it would make the timeline of that symbol play for 500 milliseconds each time the button is clicked, but it is not working, as this makes the whole thing simply start playing at 500ms. So I then tried adding a stop action after this:
sym.getSymbol("mysymbol").play();
sym.getSymbol("mysymbol").stop(500);
But this didn't work, because I guess since these events are one after the other, it doesn't wait 500 seconds to stop, and it reads stop(500) immediately after the play instruction, so that didn't work either. I'm pretty new to javascript, but I've been really trying to learn it along with the Edge API for a couple weeks now and still can't seem to solve this problem.
View 14 Replies
View Related
Dec 6, 2012
Civil 3D 2013 SP1 (64bit)
When importing an event, my point descriptions are cutoff at 16 characters.
Is there any setting to increase this?
If I have Microsoft Access installed on my computer, can one easily modify the table?
If you can modify the table using Access, can you define a default DB or would I have to redefine the string length within a table everytime I create a DB thru Civil 3D GUI?
View 8 Replies
View Related
Jul 14, 2000
How can I use a single point selection to hatch an area by using vba in AutoCAD 2000?
I can hatch the area by selecting a polyline. what I would like to do is have the user select a single point and the area would be hatched?
View 2 Replies
View Related
Sep 2, 2013
I am using following lisp code to select line object by single point.
(setq pt (getpoint "
Pick a point"))(setq ss (ssget pt))
What is the .Net equivalent to achieve this? (select object by a single point I provide)
View 3 Replies
View Related
Nov 2, 2011
I've used Trax to create a number of animation clips for a character in a video game. I can create more complex animations by arranging several of these in the Trax editor and setting blends.
What I would like to know is: can I select several scheduled clips in the Trax editor and turn those into a single clip? Like if I had two walk cycles that blend into a jump, could I select those and create a single walk-then-jump clip which would appear in the visor, and which I could then drag into the Trax editor as a single unit?
View 1 Replies
View Related
May 15, 2011
Autodesk making a student version of Maya available, it's really a wonderful tool for learning the software, however...
Is there any way to turn off the 'this is a student version' notification that pops up <b><i>every single time you save/autosave the file?</i></b>
View 6 Replies
View Related
Aug 1, 2012
I remember that you used to be able to specifically pick out individual cut edges to project to a 2D sketch. Maybe it was 2010? However, I come across this issue again and again since the new 2011 and now 2012 where I must project all cut edges. I can no longer figure out how to just project the ones I want. This can be every frustrating when dealing with complex shapes. Is this no longer possible?
IV2012
Windows XP SP3 32-bit
Intel Core 2 Duo 6400 @ 2.13 GHz
Nvidia Quadro FX 3450/4000 SDI 256MB Vram
2 GB Ram
160GB HDD
View 4 Replies
View Related
Nov 8, 2011
How to position a Point Helper at the endpoint of the Taper Length in 3d space? I think it would extend the Taper in its use for rigging things. Have a look at the screenshot. I mean the magenta ones.
I know there is a mathematically way with vector analysis, but it's to long ago to script it fast. Or is there a helper which has the same capability?
View 8 Replies
View Related
Jun 5, 2013
Any way to change the point size and length of trim/crop marks in cs5 above?
View 6 Replies
View Related
