AutoCAD Inventor :: IPart Tables In Assemblies?
Nov 2, 2012
I'm trying to take multiple parts of the same type and make them into one .ipt I began doing this and It seemed to be working fine. When I put those grouped .ipts into an .iam, Inventor creates a Subfolder of each .ipt and fills it with each part from that group and now those created ipts are unique unlinked parts (unlinked to the group ipt). I'm trying to reduce our file count and link our .ipts and .idws/.dwgs so this Inventor file creator results in the opposite of what I'm looking for. My question now is is there any way to modify this process to work the way I need it to or is there a completely different way that I should be doing this?
View 4 Replies
ADVERTISEMENT
Oct 3, 2011
I am working in an Inventor Assembly .iam, I have about 250 fasteners (screws) that are constrained to a flat washer and lock washer. I would like to put them in as a single unit (sub assembly if you will) and then promote or explode them in the top level so that my bom has 250 screws, 250 washers, and 250 lock washers all at the same level, not associated to one another except thru the constraints that were entered in the original assembly. I have tried Promote but that doesn't work because it removes the washers from the original file and I end up with only 1 instance of the assembly. Am I approaching this incorrectly? Is there a better way? I run across this scenario with different components quite often.
View 2 Replies
View Related
Mar 8, 2012
If you have created a sub assembly and inserted it into an upper level assemby, is there a way to bust up the sub assembly at that level?
The issue arising is the individual components need to be called out on the upper level, but in the drawing are all showing up as the same balloon.
View 4 Replies
View Related
Jul 12, 2012
i have a valve vault assembly that i am creating that has two headers running through a large cylinder vault. how i get a total BOM if i were to create the header assembly file separate from the the total vault assembly file. is there a way to explode the header assembly bom when i do the drawing.
View 1 Replies
View Related
Jul 20, 2012
I'm trying to use assemblies when creating a corridor. The Tool Pallette is emply but I can drag the assembiles in from the Catalog. I've also created an assembly using the ASC. Neither work when I try to use them. The error message is attached.
I'm using a network installation and I do not have the option of changing it to a DVD installation.
View 2 Replies
View Related
Apr 21, 2010
Is there anyway to copy a table from one sheet to another?
View 8 Replies
View Related
Mar 22, 2013
I was wondering if I'm able to create two tables in an iassembly, like one table for size and another for different components in the same assembly.I have a vague memory of an old assembly having this but I can't find it or it's just a figure of my imagination.
View 4 Replies
View Related
Nov 16, 2012
I'm trying to write a routine to work with a non vault revision table. I'm working with Vb .net & Inventor 2012. I am working with sheet scope tables.
From the inventor dialogue box there are two commands to add rows to the table.The insert row command. Which inserts a row in the table.
The add row command which inserts a row set the sheet revision property & sets the new row active.
I have tried to insert a new row with the following code & make it active but this does not work. Is is possible to create a new active row through the api? The new row gets added but cannot get the new row to become the active row.
dim new_row as RevisionTableRow
new_row = revtable.RevisionTableRows.AddCustom(table_length -blank_rows) ' This works as expected.
new_row.IsActiveRow = True ' this has no effect.
View 1 Replies
View Related
Jan 29, 2009
Is it possible to save a Table in a idw template? Also can you somehow copy & paste a table into another drawing?
View 8 Replies
View Related
Feb 25, 2013
Is it possible to add a user parameter into a general table in a drawing?
Example:
If I create a multi value text parameter called "Design", and give it two values "open" & "closed". Is there a way to add the chosen value into a general table on the drawing.
Autodesk Product Design Suite 2013
Win 7 Professional 32bit
Intel(R) Xeon(R) W3565 @ 3.2GHz QC
4.0 GB Ram
1GB Nvidia Quadro 2000
View 1 Replies
View Related
Sep 28, 2009
How do I change the BOM structure of iParts from Normal to Purchased? The BOM editor in the assemblies that use the iParts have the iParts as read only. I can't find a way to change them to purchased from inside the iPart either.
View 3 Replies
View Related
Nov 21, 2009
Is there a way to add an iPart column to the iPartTableColumns collection? I'm using Inventor 2009.
View 5 Replies
View Related
Apr 9, 2013
I've made a component pattern in an assembly using an iPart. The iPart as several different lengths, but I cannot switch lengths in the assembly. In other assemblies, right clicking on the Table icon allows me to change lengths, but this assembly will not.
View 2 Replies
View Related
Oct 2, 2013
In C++ can I use this function, using the key index Member string to select which row in the factory I want to insert?
In the docs all I see is Use an iPartTableRow (but no examples in C++).
Use an index, this works but I need to know the index before using it.Use a set of parameters in a string (but "[Member=142314]" does not seem to work. Can I not simple use a string with the appropriate member?
View 2 Replies
View Related
Feb 21, 2012
its possible to UN-author an iPart?
View 7 Replies
View Related
May 17, 2012
I want to insert a row which contains data into iPart as new part member but without using excel.
View 3 Replies
View Related
Jul 17, 2012
I put in 3 seperate hole tables in a drawing, labeld one counter bore holes, one dowel hles and one jack screws. used the selection hole method and all the tags were the same starting with A1 ...
Any way to control multiple hole tables so they use different tag numbers
View 3 Replies
View Related
Nov 22, 2012
I have to extract two details from a general view in order to some holes could be visible. The problem comes when I try to create the hole table, because I don't know how associate the table to both details.
View 1 Replies
View Related
Jan 6, 2014
When I try to create a table from a view, I get the following error. I have never had this error before?
View 1 Replies
View Related
May 22, 2012
How do I rename an iPart member name? Can I use Design Assistant?
View 2 Replies
View Related
Jan 22, 2012
Can I use diferrent types of threads (as variants), in one iPart/iFeature file, ex. M10x1.5 (ISO Metric profile) and G1/8" (ISO Pipe Threads)? Look at the file in attachment and correct it if possible.
View 2 Replies
View Related
Sep 27, 2012
I have created an ipart and want to create a right hand and left hand option of that part. I can mirror the features involved and suppress the mirror feature for the the RH part and so the RH version looks fine.
BUT if the mirror feature for the LH version is in the compute state I get both handing showing. How do I suppress one handing and leave the other for my RH version.
View 9 Replies
View Related
May 31, 2013
Is it possible to add a Appearance tab to a Ipart table? I am cataloging a set of parts and one part is made with steel but in Gloss - Black and Matte - Black and i'd like to differentiate the 2 without haveing to make 2 seperate Ipart files.
View 2 Replies
View Related
Jan 31, 2012
I have listbox that shows ipartname of one ipartfactory it would like and me that when selecting one of them it could send to the assembly ipart selected hear show code.
Dim InvApp As Inventor.ApplicationSet InvApp = GetObject(, "Inventor.Application") Dim IpartSeleccion As ipartMemberSet IpartSeleccion = listbox1.Value Dim oDoc As AssemblyDocumentSet oDoc = InvApp.ActiveDocument Dim oOccs As ComponentOccurrencesSet oOccs = oDoc.ComponentDefinition.Occurrences
[Code] ........
View 3 Replies
View Related
Nov 22, 2011
I have an ipart but I can't for the life of me get them to be in order, small to big in the browser.
I have them in order in the table but they are mixed up in the browser.
Is there a way to do this.
see attached picture
View 4 Replies
View Related
Apr 11, 2012
How can I get the iPart information in a partlist.
I have a tupe DN 25 iPart where I can control the length, and i'll like to have a text I description field in my partlist that says "DN 25, Length = <actual length>".
View 3 Replies
View Related
Feb 1, 2012
the newest model I have made I have run into some troubles. When I switch between one member and another most parameters update correctly but the part is still requiring an update before the finished part is created.
When the feature small sheds is enabled the pattern isn't working correctly.It seems as though the height that controls the sheds is not updating during the member change process and is causing the pattern to be the wrong length.
I have set up a form to add my parameters as there are a large number in the ipart table.I can't generate my member files as they show the member before it is updated and is wrong.
View 1 Replies
View Related
Oct 11, 2012
Is it possible to show surfaces in a drawing view of an ipart member - although the option of include all surfaces is there I can't get them to show. Similar issue with showing sketches - get model sketches is there but nothing can be shown.
View 2 Replies
View Related
Dec 19, 2003
I need an ipart for helical gear.
View 9 Replies
View Related
Mar 13, 2013
I have used ipart to create multiple members in casting & machining.but, i have face problem how to link members in that file. For example i will open 4 member in machining it will automatically refer 4 member in casting. How to link these fille.
please find the attached file for details.
View 1 Replies
View Related
Mar 29, 2012
After I place an iPart into an assembly, how can I change from one configuration to another?
View 1 Replies
View Related
