Can I use diferrent types of threads (as variants), in one iPart/iFeature file, ex. M10x1.5 (ISO Metric profile) and G1/8" (ISO Pipe Threads)? Look at the file in attachment and correct it if possible.
View 2 RepliesThis has to be a bug in the program. I created a part, added a standard 5/8" threaded hold in it. It looks great.
I export to STL thinking that I can print this part on my 3D printer. There are no threads, just a hole. What is wrong with the STL export?
How do I represent NPS threads (not NPT) in IV?
View 2 Replies View RelatedHow to properly model a screw thread around the point of the screw.
I have gotten the coil to taper to the point, however, I'm unable to get thread to terminate properly.
Essentially, the pitch remains the same as it moves down the taper, but the major/minor is diminishing until it terminates cleanly at the point.
My part does everything I want with threads but the other option I need to program is a straight hole with no threads. I assume I can do this with Param for the existing hole but not sure what it would be called? Is there a list or method of determining what these parameters are called so I'll be able to find them in the future?
View 1 Replies View RelatedI am looking to add Acme screws to my project file - I am using the thread sheet from this thread. My question is, can I add these threads to my project as I need to be able to edit this project on multiple computers (the project is synced with git)?
View 1 Replies View RelatedI have made threads with the standard thread tool (that doesn't seem to make 3D threads but instead pictures of threads) into solid and once I export the STEP file and open it in Solidworks the threads are missing. I have to export the drawing to STEP for machinist that uses Solidworks. How can I include the threads into STEP file?
View 3 Replies View RelatedI have a hole tapped from both sides. I did a hole tapped to a depth but drilled through and added a thread feature at the other end. I had changed the hole (from 7/8-9 to 1-8) but the note on the drawing was attached to the thread feature.
I would like to set it up so that the thread feature will automatically be the same as the thread on the hole. I don't get any errors saying that the hole is the wrong size for the thread, and both ends of the hole look the same (which I find somewhat disturbing).
I need to link the threads together. At the very least it should look wrong, and hopefully complain that it's wrong, but I would much rather have access to these features so I can control them better.
IV 2012.I need to make a non-standard thread to mate with a purchased component. Is there a way of creating it in my ipt file so that the hole and thread tool in the idw pulls the correct data?
View 1 Replies View RelatedI've been trying to make a male and matching female screw and fitting for attaching two parts that will be 3D printed. However, whenever I export the part to an .STL file, the threads do not show or print properly.
View 4 Replies View RelatedI'm working on some bottle concepts and I have a need to model standard plastic bottle threads. These threads are designated by a diameter in mm and how many threads are on the bottle. Example: 33-400 The 33 is the diameter and 400 refers to a single turn of the cap. Manufacturers like Aptar make bottle tops of various types to fit this spec. I happen to be looking at dispensing lids (think Heinz Ketchup bottle). While I've found specs for Major diameter, Minor diameter and TPI, I have found precious little that describes the thread shape itself. I've tried to reverse engineer a sample thread from... you guessed it.. a Heinz Ketchup bottle. I feel that my venier caliper and micrometer are not doing this effort justice.
Looking for DWG file or Inventor model of the thread profile?
I'm using the coil command to create the thread on the bottle neck. It works okay. An issue arises with the thread termination. The threads on the bottle itself "chamfer" into the bottle neck. While I don't think I can do this with the coil command itself, how to create the "lead-in" for the plastic thread.
We want to substitute drawings with a color-palette. This means, we have to set different colors to different kind of features ( i.e. H7-fitting to red, thread to yellow, ....). We do this manually by now.
I mean, if on makes a fit-hole then automatically it appears in red. All threads he makes are in yellow and so on. Is there a chance to make a feature-based color-table in inventor and if it is so.
I have an assembly that is made up of 3 unique parts ( 5 parts total). These parts and there features are to be laser cut, then assembled and welded along the outer perimeter in the small chamfer. I have designed the parts to have 5/16 holes, which will be later tapped to 3/8"-16 UNC after assembly.
Once these parts are assembled, I don't understand how I can change the holes to reflect this. Meaning I want the parts to be pre-drilled(laser cut) with 5/16 holes, but I want the assembly to then have 3/8-16UNC holes.
The hole command will not let me select the existing hole features in the assembly and add threads. What is the consequence of inserting a 'new' hole with 3/8-16UNC threads over the existing 5/16" holes in the assembly?
Is my workflow incorrect? should I have the parts modeled with the tapped holes and just make a note on the drawing to not tap these holes until assembly? how does that affect the laser cutting?
company needs a very elaborate parts list on the drawings regarding different custom properties of parts (so I created new parts to easily add these custom columns...without screwing up parts in the content center somehow).
I needed to get things up and running quick so I imported a good handful of bolts and nuts from McMaster Carr.
the threading on the bolts is so detailed that it's really cluttering up the drawing views with extra line geometry (basically black blobs wherever bolt threads or hidden bolt threads are located)...is there any way to lower the detail of objects, say just to show the outline of the bolt and it's "perimeter" thread outline...but not show the individual threading across a bolts face?
Some images in threads are now showing up with the lower portion of the picture blacked out. Its like there is a limit on how large the image can be. Many times what the posting memeber is trying to show is blacked out.
View 9 Replies View RelatedHow to make the threads match on a male and female part. Using a tap size chart, I made a hole 31.5 mm in diameter. Then I added interior threads with a tap size M33 x1.5. How do I determine the diameter of the male part before adding threads? Would it also be 31.5 mm? I plan on 3d printing these parts, so I've also been using the thread modeler tool.
View 1 Replies View RelatedI can't tell if this is a bug or a "feature."
I have created a custom thread.xls table so that thread callouts are in decimal format per ASME B1.1.
When I use the Hole / Thread feature note in an .idw, the thread class will not show on an external thread. If I change the format to not use Custom Thread Designation, the thread class appears. If I use the Custom Thread Designation on a threaded hole, everything works fine.
I am trying to import thousands of pictures into Lightroom as I have a mess of pictures do to a long story...But basically I have probably 30,000 pictures in a bunch of folders that I want to import.
One issue I have found is that I don't want to import TIFF, BMP, GIF, or things like PNG. I really only want jpg files or jpeg files unless I stumble across others in another format I haven't found yet.
Can I set something during the import? I have searched the forums and internet, but haven't found anything that mentions this.
How to clean up a mess like this where I have 30,000 pictures but probably only need 10,000 as there are duplicates upon duplicates due to having to move the pictures around in a hurry as I had a mess in my basement during a storm a couple years ago.
I'm using a student version of AIP 2012 and am having a problem exporting to .STL file types.
When using a "Standard(mm).ipt" and designing the part in mm, upon export it shrinks the dimensions down.
For example, the width of my sketch is 193mm, upon inspection on a different computer with VCarve Pro and CUT3D were 19mm.
I don't want to dimension the parts as to make the problems in export to the right size because I think that defeats the universal aspects of autodesk.
Any method to set all the Tolerance Types for a GeneralDimension via VBA.
The Tolerance object, accessible via the GeneralDimension object, offers methods to set Deviation, Fits, Limits & Symmetric tolerance types, but I can’t find a way to set other Tolerance types, such as Reference, Basic, Max & Min
I am looking for a material database with more steel types than the ones that are installed in inventor.
Is there a comprehensive database that I can download and install or do I need to add the material one by one.
Normaly I can just copy a existing steel and just use the existing properites and just change the name but I see a risk of this since in the future I may want to simulte a part and then the material data is not correct.
So... is there a good list that I can download and install??
I have a customer that is trying to export a file out as an STP file. When he brings up the Export or Save As dialog boxes none of the normal model file types are listed. I have had him do a Repair and a Reinstall of INV 2013 which did not fix the problem.
View 9 Replies View RelatedHow do I change the BOM structure of iParts from Normal to Purchased? The BOM editor in the assemblies that use the iParts have the iParts as read only. I can't find a way to change them to purchased from inside the iPart either.
View 3 Replies View RelatedIs there a way to add an iPart column to the iPartTableColumns collection? I'm using Inventor 2009.
View 5 Replies View RelatedI've made a component pattern in an assembly using an iPart. The iPart as several different lengths, but I cannot switch lengths in the assembly. In other assemblies, right clicking on the Table icon allows me to change lengths, but this assembly will not.
View 2 Replies View RelatedIn C++ can I use this function, using the key index Member string to select which row in the factory I want to insert?
In the docs all I see is Use an iPartTableRow (but no examples in C++).
Use an index, this works but I need to know the index before using it.Use a set of parameters in a string (but "[Member=142314]" does not seem to work. Can I not simple use a string with the appropriate member?
its possible to UN-author an iPart?
View 7 Replies View RelatedI want to insert a row which contains data into iPart as new part member but without using excel.
View 3 Replies View RelatedI had some success transferring geometries, generated with an advanced math software, to Inventor using IGES files containing Manifold Solid B-Rep Object Entities (Type 186) (see the specification IGES5-3_forDownload-1.pdf). Now I would like to include several Type 186 entities into a single IGES file and form the geometrical unit of these (and them), for which the IGES Boolean Tree Entity (Type 180) seems to exist. I'll do some trial-and-error testing, but it would be very useful to have a (reliable) list of all IGES entities the Inventor IGES import function does or does not support (like these: Transcendata, MoldflowInsight). Unfortunately I could not find such a list anywhere.
Another question: Are the IGES import/export functions of Inventor written by Autodesk (and/)or are third-party libraries used? If the latter, which ones?
How do I rename an iPart member name? Can I use Design Assistant?
View 2 Replies View RelatedI have created an ipart and want to create a right hand and left hand option of that part. I can mirror the features involved and suppress the mirror feature for the the RH part and so the RH version looks fine.
BUT if the mirror feature for the LH version is in the compute state I get both handing showing. How do I suppress one handing and leave the other for my RH version.