We want to substitute drawings with a color-palette. This means, we have to set different colors to different kind of features ( i.e. H7-fitting to red, thread to yellow, ....). We do this manually by now.
I mean, if on makes a fit-hole then automatically it appears in red. All threads he makes are in yellow and so on. Is there a chance to make a feature-based color-table in inventor and if it is so.
I just got back a submittal package from a customer. Many markups because of incorrect dimension callout for a certain fit. When I dimensioned the drawing, I used the limit/fit calculator that is with Inventor. Now I just compared this calculator with the ANSI B4.1-1976 standard that it is supposed to follow. What I found was that the values in Inventor are wrong.
I just checked a few sizes and they do not match the ANSI standard. Not sure it there are other fits that have errors in them, but I will bet there are. Does Autodesk realize that if this information is put out, we have to take it as gospel. I don't have the time to check every-little-stinking dimension. If the dims in the table is wrong, I might as well type them in myself and forget about using the table.
Here is a screen shot of some of the errrors that I found. I also checked this size range for RC3, RC4 and RC5. They all have errors in them too. I am sure there are more, just dont have the time to check. We are not talking about "Freeware" here...
I need to find out how much smaller the part in the upper image is so it fits inside the similar shape in the bottom image. The real part is a bit more complicated so it's hard to calculate if it fits. Is it possible to make those parts in assembly mode so that they don't move through each other and I could move the upper part inside the lower and find out that way if it fits?
[URL]
Is there any way to set features to be invisible when create sketch after those 3D features so as to make the sketch more easy to see?
View 3 Replies View RelatedHow can I display the object data in a grid with vb.net and also add new features to the same layer along with the object data.
View 3 Replies View RelatedThis has to be a bug in the program. I created a part, added a standard 5/8" threaded hold in it. It looks great.
I export to STL thinking that I can print this part on my 3D printer. There are no threads, just a hole. What is wrong with the STL export?
How do I represent NPS threads (not NPT) in IV?
View 2 Replies View RelatedHow to properly model a screw thread around the point of the screw.
I have gotten the coil to taper to the point, however, I'm unable to get thread to terminate properly.
Essentially, the pitch remains the same as it moves down the taper, but the major/minor is diminishing until it terminates cleanly at the point.
Can I use diferrent types of threads (as variants), in one iPart/iFeature file, ex. M10x1.5 (ISO Metric profile) and G1/8" (ISO Pipe Threads)? Look at the file in attachment and correct it if possible.
View 2 Replies View RelatedMy part does everything I want with threads but the other option I need to program is a straight hole with no threads. I assume I can do this with Param for the existing hole but not sure what it would be called? Is there a list or method of determining what these parameters are called so I'll be able to find them in the future?
View 1 Replies View RelatedI am looking to add Acme screws to my project file - I am using the thread sheet from this thread. My question is, can I add these threads to my project as I need to be able to edit this project on multiple computers (the project is synced with git)?
View 1 Replies View RelatedI have made threads with the standard thread tool (that doesn't seem to make 3D threads but instead pictures of threads) into solid and once I export the STEP file and open it in Solidworks the threads are missing. I have to export the drawing to STEP for machinist that uses Solidworks. How can I include the threads into STEP file?
View 3 Replies View RelatedI have a hole tapped from both sides. I did a hole tapped to a depth but drilled through and added a thread feature at the other end. I had changed the hole (from 7/8-9 to 1-8) but the note on the drawing was attached to the thread feature.
I would like to set it up so that the thread feature will automatically be the same as the thread on the hole. I don't get any errors saying that the hole is the wrong size for the thread, and both ends of the hole look the same (which I find somewhat disturbing).
I need to link the threads together. At the very least it should look wrong, and hopefully complain that it's wrong, but I would much rather have access to these features so I can control them better.
IV 2012.I need to make a non-standard thread to mate with a purchased component. Is there a way of creating it in my ipt file so that the hole and thread tool in the idw pulls the correct data?
View 1 Replies View RelatedI've been trying to make a male and matching female screw and fitting for attaching two parts that will be 3D printed. However, whenever I export the part to an .STL file, the threads do not show or print properly.
View 4 Replies View RelatedI'm working on some bottle concepts and I have a need to model standard plastic bottle threads. These threads are designated by a diameter in mm and how many threads are on the bottle. Example: 33-400 The 33 is the diameter and 400 refers to a single turn of the cap. Manufacturers like Aptar make bottle tops of various types to fit this spec. I happen to be looking at dispensing lids (think Heinz Ketchup bottle). While I've found specs for Major diameter, Minor diameter and TPI, I have found precious little that describes the thread shape itself. I've tried to reverse engineer a sample thread from... you guessed it.. a Heinz Ketchup bottle. I feel that my venier caliper and micrometer are not doing this effort justice.
Looking for DWG file or Inventor model of the thread profile?
I'm using the coil command to create the thread on the bottle neck. It works okay. An issue arises with the thread termination. The threads on the bottle itself "chamfer" into the bottle neck. While I don't think I can do this with the coil command itself, how to create the "lead-in" for the plastic thread.
I have an assembly that is made up of 3 unique parts ( 5 parts total). These parts and there features are to be laser cut, then assembled and welded along the outer perimeter in the small chamfer. I have designed the parts to have 5/16 holes, which will be later tapped to 3/8"-16 UNC after assembly.
Once these parts are assembled, I don't understand how I can change the holes to reflect this. Meaning I want the parts to be pre-drilled(laser cut) with 5/16 holes, but I want the assembly to then have 3/8-16UNC holes.
The hole command will not let me select the existing hole features in the assembly and add threads. What is the consequence of inserting a 'new' hole with 3/8-16UNC threads over the existing 5/16" holes in the assembly?
Is my workflow incorrect? should I have the parts modeled with the tapped holes and just make a note on the drawing to not tap these holes until assembly? how does that affect the laser cutting?
company needs a very elaborate parts list on the drawings regarding different custom properties of parts (so I created new parts to easily add these custom columns...without screwing up parts in the content center somehow).
I needed to get things up and running quick so I imported a good handful of bolts and nuts from McMaster Carr.
the threading on the bolts is so detailed that it's really cluttering up the drawing views with extra line geometry (basically black blobs wherever bolt threads or hidden bolt threads are located)...is there any way to lower the detail of objects, say just to show the outline of the bolt and it's "perimeter" thread outline...but not show the individual threading across a bolts face?
Some images in threads are now showing up with the lower portion of the picture blacked out. Its like there is a limit on how large the image can be. Many times what the posting memeber is trying to show is blacked out.
View 9 Replies View RelatedHow to make the threads match on a male and female part. Using a tap size chart, I made a hole 31.5 mm in diameter. Then I added interior threads with a tap size M33 x1.5. How do I determine the diameter of the male part before adding threads? Would it also be 31.5 mm? I plan on 3d printing these parts, so I've also been using the thread modeler tool.
View 1 Replies View RelatedI can't tell if this is a bug or a "feature."
I have created a custom thread.xls table so that thread callouts are in decimal format per ASME B1.1.
When I use the Hole / Thread feature note in an .idw, the thread class will not show on an external thread. If I change the format to not use Custom Thread Designation, the thread class appears. If I use the Custom Thread Designation on a threaded hole, everything works fine.
The angle or radius are outside the table boundaries. I have used bend tables before and have not run into this. See screenshot. What I don't understand is that in the error dialog box the Thickness is correct the Radii are correct and the Angle is correct except it is showing a -90 degrees. Is that the problem? The negetive? Why is it showing a negative number. I can't change the way the part is formed. The problem seems to be with the lower left hand curl. It does go ahead and flatten it, but I don't trust the results when I have the three errors.
View 1 Replies View RelatedI have a part where I have placed a number of table driven iFeatures. These features generate parameters in the model that I can see in the parameter table. I am trying to find a way to have these iFeature parameters show up in the hole table in my drawing.
By 'exporting' the parameters, I have been able to get the values to show in notes and drawing view labels but I can't find a way to add them as a 'New Property' in my hole table.
I was wondering what is the best way to save a photoshop file such as a business card or stationary labels so they "KEEP" their color you see on screen.
I am already building in CMYK mode. My Client has a nice gray scale scheme but I am worried that the print shop will mess up the colors.
How do I create a custom set of colors and adhere to that scheme throughout the clients stationary and media.
ie. Cards, Labels, Signs, etc.
Is there an option to print a color scale along with the image, sorta like when you calibrate your printer?
(again): how to create one title block that fits all paper sizes?
In the ArcGIS, the same layout can fit all paper sizes and there is no need to customize the layout for each paper size manually. For example, if the map is set up based on A4 paper size and then needed to be printed in A0 size, then all the lay out elements will be automatically proportionally changed to fit the new paper size.
I’m not sure if there is an equivalent features in the AutoCAD that handle this issue
I want different features on and off with iLogic.
I have a text parameter with a choice menu of 1,2, and 3
This I want some features on and off.
If I pass the parameter I get a message: No feature found with the name. Mvg Jos
Your drawings are only as good as the symbols that complete them...
My flat pattern of a sheet metal part fails when I added strenthening Press ribs to the middle of the part using an iFeature.
I know Inventor is not capable of flattening embossed sheetmetal but is there a way to still get the flat pattern & ignore the formed areas?
Seems to me I was able to add some model features in the past like bosses, extruded holes KO's etc & I could still make a flat pattern.
I know I can use derived part to do it but that adds complications.
IV 2012 SP2
Inventor Suite 2013 Ultimate
when in simulation, if you suppress a feature is it totally taken out of the simulations workings?
I.e. if I was working on a project like some weighing scales and I had a load of objects on the scales and I then suppressed some of the objects, will the scales rise up a little to counteract the reduced weight?
I am working on a standard part that has different configurations depending on user inputs into a GUI. Once the user enters all the required parameters, the part is in its final form with all unnecessary features suppressed. I am looking for a way to automate the delete of the suppressed features using a rule and i Logic before the user saves the file.
The main reason for doing this is to reduce the file size of the part once it is saved because this same template will be used for hundreds of parts and I don't want to waste unnecessary storage space on suppressed features.
I am making a multiview drawing with isometric of a certain sheet metal part. Due to manufacturing reasons, they have to make the part longer than necessary to get a bend in it then I will have them shear off the extra. Is there a way I can show the multiview and flat pattern WITH the extra material and show the isometric WITHOUT that extra? In the model I remove the excess with a cut but I don't know how to suppress a feature for one view and not another.
View 2 Replies View RelatedI am trying to hide an extruded cut in one view of my .idw. I have tried supressing in one view but this does not work. I need to show a before and after of this cut in the same model. I can not make two models because this is a controlled document.
View 5 Replies View Related
