My part does everything I want with threads but the other option I need to program is a straight hole with no threads. I assume I can do this with Param for the existing hole but not sure what it would be called? Is there a list or method of determining what these parameters are called so I'll be able to find them in the future?
View 1 RepliesI have an assembly that is made up of 3 unique parts ( 5 parts total). These parts and there features are to be laser cut, then assembled and welded along the outer perimeter in the small chamfer. I have designed the parts to have 5/16 holes, which will be later tapped to 3/8"-16 UNC after assembly.
Once these parts are assembled, I don't understand how I can change the holes to reflect this. Meaning I want the parts to be pre-drilled(laser cut) with 5/16 holes, but I want the assembly to then have 3/8-16UNC holes.
The hole command will not let me select the existing hole features in the assembly and add threads. What is the consequence of inserting a 'new' hole with 3/8-16UNC threads over the existing 5/16" holes in the assembly?
Is my workflow incorrect? should I have the parts modeled with the tapped holes and just make a note on the drawing to not tap these holes until assembly? how does that affect the laser cutting?
I am pretty familiar with Assembly constraints but I want to know how do you constrain/motion a screw or similar object to be able to turn appropriately whilst going up & down a threaded hole?
View 6 Replies View RelatedHow to use sweep to successfully put threads in a hole. Attached is the drawing with a helical coil and an object in two different orientations (A and B). To the right of that, you can see the path they took for each. The object rotated from the original position before following the path. Tried changing the position of the object to sweep, but either it sweeps it 180 degrees from what it is already doing (still wrong) or the program says it is invalid and won't do anything till I put it back in the original rotational position and try again.
View 9 Replies View RelatedI've got a template with a set of Object defaults for an Inch drawing and a set for a Metric drawing. I've just noticed that within my metric set, if I insert a hole table with tapped holes, the font on the tapped holes doesn't match the other hole types. I'm searched around, but all the settings for the hole table style reference the same text style. (Please see the attached image.)
So is there a way to set a certain hole type to have a certain font or size within a hole table? Because if there is, I'd obviously like to remove it..... But I can't seem to figure out where the issue is.
I am trying to add a hole to an existing hole chart. I drop the part into a new drawing, set the ordinate "zero", and add a hole chart by selecting a few holes. When I attempt to edit the chart: click chart, right click "edit", click add hole, select new holes, right click to create, the "create" selection is greyed out and all I have to choose from is cancel. I searched the forum here but could not find a reference to this a know issue. Am I doing something wrong or is this a glitch of 2013.
We are running win7 x64 machines and this happens on both the 2013 Ultimate and Premium editions of the product.
I have had this problem intermittently for a few weeks since going to Inventor 2013 SP1.1. I have a part within an assembly and that part has holes created in it before assembling it with other parts. Now when I try and create a hole table in a drawing of the assembly I cannot select hole edges and the hole table is blank when trying to create it automatically from view selection. I originally thought it may be an alignment issue but I have since aligned everything correctly and it still persists. I can create the hole table if I import in just the part into the drawing but it will not allow me to create the table on the whole assembly.
I can also create the hole table if I use "centred pattern" and create cross hairs on all of the holes however it does not give me correct annotations for the holes as shown in attachment and I can manually change the annotations but seriously this should not be required. As shown in the screen shot it reads as A1 down to K1 instead of A1 to A10. .
Question: Is it possible to control the Hole Dimensions called out on the Hole Chart? As in controling leading/trailing zeros for main hole dim, alt home dim and tolerances? Can you combine the Main Dim with the Alt dim in a single column, separated with parentheses? (same with tolerance?)
View 5 Replies View RelatedI would like to use the hole command to place a hole in a part. When I place the hole it won't allow me to use one of the origin planes to locate the hole from. Can I only locate holes off edges?
View 4 Replies View RelatedI have an assembly that contains a part and a hole feature (the hole feature is at the assembly level). Using the api, I'm trying to get the hole location relative to the part's coordinate system in a without using the holeplacementdefinition.distance property, this way I can get the hole location regardless of the way it was defined.
View 2 Replies View Relatedi use hole feature names in hole table.
i assign hole names attribute to hole feature but dont get attribute hole table.
how to get hole names in hole table.
While creating holes in a part, a small counter shows (when you click on a point) of how many holes there are.
Programs:
Solidworks (1998-2011)
Autodesk Inventor (R8 - 2013)
Autodesk AutoCad 2D
Autodesk AutoCad 3D
Catia V5
SolidEdge
Anvil (Very old program!)
Pro/E
This has to be a bug in the program. I created a part, added a standard 5/8" threaded hold in it. It looks great.
I export to STL thinking that I can print this part on my 3D printer. There are no threads, just a hole. What is wrong with the STL export?
How do I represent NPS threads (not NPT) in IV?
View 2 Replies View RelatedHow to properly model a screw thread around the point of the screw.
I have gotten the coil to taper to the point, however, I'm unable to get thread to terminate properly.
Essentially, the pitch remains the same as it moves down the taper, but the major/minor is diminishing until it terminates cleanly at the point.
Can I use diferrent types of threads (as variants), in one iPart/iFeature file, ex. M10x1.5 (ISO Metric profile) and G1/8" (ISO Pipe Threads)? Look at the file in attachment and correct it if possible.
View 2 Replies View RelatedI am looking to add Acme screws to my project file - I am using the thread sheet from this thread. My question is, can I add these threads to my project as I need to be able to edit this project on multiple computers (the project is synced with git)?
View 1 Replies View RelatedI have made threads with the standard thread tool (that doesn't seem to make 3D threads but instead pictures of threads) into solid and once I export the STEP file and open it in Solidworks the threads are missing. I have to export the drawing to STEP for machinist that uses Solidworks. How can I include the threads into STEP file?
View 3 Replies View RelatedI have a hole tapped from both sides. I did a hole tapped to a depth but drilled through and added a thread feature at the other end. I had changed the hole (from 7/8-9 to 1-8) but the note on the drawing was attached to the thread feature.
I would like to set it up so that the thread feature will automatically be the same as the thread on the hole. I don't get any errors saying that the hole is the wrong size for the thread, and both ends of the hole look the same (which I find somewhat disturbing).
I need to link the threads together. At the very least it should look wrong, and hopefully complain that it's wrong, but I would much rather have access to these features so I can control them better.
IV 2012.I need to make a non-standard thread to mate with a purchased component. Is there a way of creating it in my ipt file so that the hole and thread tool in the idw pulls the correct data?
View 1 Replies View RelatedI've been trying to make a male and matching female screw and fitting for attaching two parts that will be 3D printed. However, whenever I export the part to an .STL file, the threads do not show or print properly.
View 4 Replies View RelatedI'm working on some bottle concepts and I have a need to model standard plastic bottle threads. These threads are designated by a diameter in mm and how many threads are on the bottle. Example: 33-400 The 33 is the diameter and 400 refers to a single turn of the cap. Manufacturers like Aptar make bottle tops of various types to fit this spec. I happen to be looking at dispensing lids (think Heinz Ketchup bottle). While I've found specs for Major diameter, Minor diameter and TPI, I have found precious little that describes the thread shape itself. I've tried to reverse engineer a sample thread from... you guessed it.. a Heinz Ketchup bottle. I feel that my venier caliper and micrometer are not doing this effort justice.
Looking for DWG file or Inventor model of the thread profile?
I'm using the coil command to create the thread on the bottle neck. It works okay. An issue arises with the thread termination. The threads on the bottle itself "chamfer" into the bottle neck. While I don't think I can do this with the coil command itself, how to create the "lead-in" for the plastic thread.
We want to substitute drawings with a color-palette. This means, we have to set different colors to different kind of features ( i.e. H7-fitting to red, thread to yellow, ....). We do this manually by now.
I mean, if on makes a fit-hole then automatically it appears in red. All threads he makes are in yellow and so on. Is there a chance to make a feature-based color-table in inventor and if it is so.
company needs a very elaborate parts list on the drawings regarding different custom properties of parts (so I created new parts to easily add these custom columns...without screwing up parts in the content center somehow).
I needed to get things up and running quick so I imported a good handful of bolts and nuts from McMaster Carr.
the threading on the bolts is so detailed that it's really cluttering up the drawing views with extra line geometry (basically black blobs wherever bolt threads or hidden bolt threads are located)...is there any way to lower the detail of objects, say just to show the outline of the bolt and it's "perimeter" thread outline...but not show the individual threading across a bolts face?
Some images in threads are now showing up with the lower portion of the picture blacked out. Its like there is a limit on how large the image can be. Many times what the posting memeber is trying to show is blacked out.
View 9 Replies View RelatedHow to make the threads match on a male and female part. Using a tap size chart, I made a hole 31.5 mm in diameter. Then I added interior threads with a tap size M33 x1.5. How do I determine the diameter of the male part before adding threads? Would it also be 31.5 mm? I plan on 3d printing these parts, so I've also been using the thread modeler tool.
View 1 Replies View RelatedI can't tell if this is a bug or a "feature."
I have created a custom thread.xls table so that thread callouts are in decimal format per ASME B1.1.
When I use the Hole / Thread feature note in an .idw, the thread class will not show on an external thread. If I change the format to not use Custom Thread Designation, the thread class appears. If I use the Custom Thread Designation on a threaded hole, everything works fine.
Is there a way in the description field of an Inventor hole table to have mixed units? Some hole sizes at fractions, some at 2 plc, and others at 3 places.
Inventor Pro 2013 or 14
I am working on some VB code to reterive the dimensions fron an IDW and put them on an excel spreadsheet for an Inspection report. I found some code to which gets the linear dimensions and have added tolerance type and tolerance bands.
I have been unable to get the hole notes off the IDW. Got the general notes to work with the following
Dim invDrawNotes As Inventor.DrawingNotes
Dim invActDrawNotes As Inventor.DrawingNote
Set invDrawNotes = invActSHT.DrawingNotes
[Code]....
I need to add thread to a hole but cannot do this under the edit command. How to do this ?
View 7 Replies View RelatedIs there a way to tell Inventor to use the mean value for threaded holes? As it is IV always puts the Minor-min value for the hole size, which is a PITA for any and all CAM software.
The thread data can be extracted in CAM, but the hole size still remains what it's modeled as. I know I can edit the spreadsheet and cheat it, but that isn't exactly the correct way to go about it.